How to glue separating convertible top and rear window on my Plymouth Prowler

Подписаться 222 тыс.

Просмотров 242 тыс.

50% 1

Get Amazing Goop Automotive here... geni.us/t8xq
Get Plymouth Prowler accessories here... geni.us/ItAvYEk
----------
LET'S TALK ABOUT LIVING BETTER:
▶ Podcast: geni.us/FtGAT4
▶ My Amazon Store: www.amazon.com/shop/petervonp...
----------
IF YOU'D LIKE TO SHOW SOME LOVE:
▶ Buy My Book: geni.us/qwbZAE
▶ Become A Channel Member: geni.us/AA3Jk
▶ Patreon: / petervonpanda
▶ Merch: petervonpanda.storenvy.com/
▶ Free Panda Group: panda-research-institute.mn.co
FOLLOW MY OTHER SOCIAL MEDIA PLATFORMS:
▶ Instagram: / petervonpanda
▶ Facebook: / petervonpanda
----------
As an Amazon Associate, I earn from qualifying purchases.
The Plymouth Prowler, later the Chrysler Prowler, is a retro-styled production car manufactured a marketed from 1997 to 2002 by DaimlerChrysler, based on the 1993 concept car of the same name.
Plymouth Prowler
2008-10-05 Red Plymouth Prowler at South Square.jpg
Overview
Manufacturer Plymouth (1997-2001)
Chrysler (2001-2002)
Also called Chrysler Prowler
Production 1997-2002
Assembly Shadyside, Ohio, United States
Detroit, Michigan, United States
Body and chassis
Class Sports car
Body style 2-door roadster
Layout FR layout
Platform Chrysler PR platform
Powertrain
Engine 3.5 L EGG V6
Transmission 4-speed 42LE automatic
Dimensions
Wheelbase 113.3 in (2,878 mm)
Length 165.3 in (4,199 mm)
Width 76.5 in (1,943 mm)
Height 50.9 in (1,293 mm)
Curb weight 2,800 lb (1,270 kg)
Chronology
Successor Chrysler Crossfire
Purple
Rear
Purple Metallic
Black
Bright Silver Metallic
Inca Gold Pearl Coat
The Prowler was offered in a single generation in a front-engine, rear-drive, rear-transmission configuration - with an overall production of 11,702. Expedition Money LLC
A Financial Wellness Program That Works
expedition.money
www.expedition.money
www.bankfinancialwellness.com
www.creditunionfinancialwellness.com
www.cufinancialwellness.com
www.smallbusinessfinancialwellness.com
www.employeefinancialwellness.net
www.financialwellnessforschools.com
www.christianfinancialwellness.com The Accidental RU-vidr: How I Make A Six-Figure Income On RU-vid: geni.us/UZ2bnyd

Авто/Мото

Опубликовано:

18 дек 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 105

@myrnaparedes3475 5 лет назад

Thank you so much for the tip. My son was looking for something for his Audi. Thanks too you, I found something that helped him! 💖👍🏼

@joshuaychung 6 лет назад

I can't wait to see this on the road in the spring.

@lawrenceribeiro2393 3 года назад

Thnaks man really saved me i just fixed my top and this happened to me and i was close to bringing it back to the dealership

@kidsshareworkshops.2008 3 года назад

OMG! I am so glad I watched this!! lol! Always enjoyed George but now I love him! Donating...because it is a worthy cause, not because I am ever taken back by celebrities, only the ones who care enough to put this much effort into humanity! George, George, Geroge! You are the man!

@jr42a1 Год назад

Goop glue is the answer for sure. Ive used it for years. Just make sure your surfaces are clean and youre good to go ! After reading up on goop glue ,its all pretty much the same but in different consistencies. ALSO, Goop Marine comes in an 11 oz. caulk tube. Its slightly runnier but not much. I use it on everything.

@bobcat409 3 года назад

Good job with the follow up and follow up. Going to get some now.

@KBarron43 2 года назад

It helps to put a blanket or towel inside against the window when applying & let dry to avoid separation & droop

@juanperez-ur4gx 6 лет назад

Mr Panda if you’re ever in the Los Angeles area come down to super car Sunday on Topanga Blvd or cars and coffee in Malibu. You will see some modified and stick prowlers. Keep the videos coming !!!

@petervonpanda 6 лет назад

Cool!! Thanks!

@CJJay-mz7ey 2 года назад

You need to use 3M primer and 3M window weld. The best way to fix this long term.

@petervonpanda 2 года назад

That's a good tip. I didn't do that, but I would if I need to redo it.

@jaysonovo4778 2 года назад

Yo, thanks for the recommendation. Looked into it and seems like the best ans easiest way to go. Kudos to you friend! Enjoy the summer weather.

@johnmcpeak7159 3 года назад

Just Finished (I HOPE) reattaching rear window to a 3 year old top. First of all Do not try yourself. 2nd bought a 16.5 beach ball from Wally world. Put the ball in the space behind the seats and blew it up. Doing this kept the window in it's final position.I was able to center it top and sides with this in place. Also because I am sloppy I put duck tape around the top window area.At tis time I was able to glue the side and then clamp then glue the bottomed clamp lastly glued the top and clamped. Your video gave me confidence THANK YOU

@B0Nnaaay 2 года назад

Ooooh! Love the MacGyver beach ball fix!

@johnbasil7882 7 месяцев назад

Thanks. I have a Chrysler Sebring. (I can't believe I just said that sentence). It's a 2005 with 41000 original miles and I'm in Florida so you got to have a drop top. I had a similar problem just not as aggressive. My issue was confined to the center bottom. I live in Orlando, Fl every winter but a Chicago boy 24/7 ! A big thanks from Rogers Park Guy of California Avenue, in between Touhy and Howard. Orlando sucks and you rock. Thanks for your video.

@nikkeininja3932 5 лет назад

THANK YOU. I didn't want to have to tell my dad about my Sebring doing the same thing. Now I can do it myself lol

@gomerpyle6113 2 года назад

Did it work with your Sebring? I have a Sebring and need to do it too

@wokaroni Год назад

Same

@colinbiddle2649 4 месяца назад

@@gomerpyle6113same

@ClareBearForever 2 года назад

Thank you. Can wait to try this on my top

@rickeysweeney1174 2 года назад

Great job looks good thanks for the information

@misamisatv 6 лет назад

Hey do you do requests? I've been looking for a solar powered rotating turntable display but I don't know which one to get. They're great for showing off small things like watches or hot wheels cars! Glad to see a video about the Prowler by the way!

@trishajanecreates 2 года назад

This is amazing thank you for the tutorial. My convertible Volkswagen Beetle top is separating from the glass. Definitely going to tackle this project. Excellent explanation😊👌👍🏻

@ohboy2592 2 года назад

Hopefully you didn’t. It won’t work

@namratasingh5500 9 месяцев назад

@@ohboy2592 do you have any other solution? I am facing same issue.

@mannyrosado9887 3 года назад

Very useful!

@dsmchick935 5 лет назад

I got a Mitsubishi Eclipse Spyder to fix, im gonna try this. Thanks for the video!

@danieleehernandez8082 5 лет назад

DSM CHICKS i do too did it work. Respond fast plz

@KASHOUTKXN 5 лет назад

Danielee Xo aye you fine asf 🥴 drop ya ig and did it work?

@luvv4lexx 4 года назад

That One GUY lmaoo

@dsmchick935 4 года назад

@@danieleehernandez8082 havent tried it still, sorry

@raynerose1181 4 года назад

I have the exact same car with the same problem! Trying today! Thinking of trying waterproofing spray after all is dried so it has no chance of leaking

@angelinaflores1794 5 месяцев назад

I’m hoping to try this in the past I used different glues and all looked horrible on my mustang. It made my window look like a huge black hard globby mess. I want to scrape it all off and try this technique instead. Yet I live in Texas lol wish me luck bc this heat is horrible

@jbrat4313 4 года назад

Hello awesome video thanks were did you buy that syringe from? That seems like it made the repair a no mess event which is a good thing

@crsta42r 4 года назад

Hi Peter! Great video! Did this last? I'm about to try this on my 2000 Toyota Solara Convertible SLE ....please let me know ASAP. Thank you!

@petervonpanda 4 года назад

Hi Christa, Yes, it worked great! Still holds. If I were to do it again though, I would also get these glass clamps to hold it in place... amzn.to/32qD4C2

@glamelhershkovitz1664 Год назад

Some time has passed now. Question: Did the seal hold with this glue or did it collapse under stress? Pls update

@FreddySherman 2 года назад

I was hoping this would work for my 2004 Solara but the glue didn't separate, the stitching broke through and separated.

@carycase5563 Год назад

I used goop and it didn't work....I live in Arizona and the top is black, so the heat caused it to delaminate. Now I am in the middle of getting the goop off of both sides and start with a new product that is silicone based and does better with high temperatures. Hope everyone else has better luck.

@lesabeckley1662 2 года назад

I would like to know how long this glue job lasted please.

@Learnerofthings 2 года назад

I have a Toyota MR-2 Spyder with the same problems, only worse. Thanks!

@CandlelightVideo 4 года назад

Hi! THANK YOU for this vid... very very helpful! I used this GOOP product to repair my '05 VW Beetle top glass. So far it's worked FANTASTIC on the bottom and two sides where I put it on. Bottom -- wait 24 hrs... two sides -- 24 hrs. Great! Problem I have now is the soft top does not overlap the glass at the top (shrinkage problem?).. yes, I can get them to meet by wedging open the top during the repair, but it'll pull apart I'm certain as soon as I clip it all shut. So -- what to do? If I unfold the lip of the soft top it adds about a 1/2" and they touch even when closed... but barely. I'm thinking a "patch" to extend the length of the soft top at the top edge of the glass would make for WAY less tension when closed and close that gap. Is this feasible? What fabric to use to fill that gap? Is there another technique I could use here? ARGGGGHHH!

@dreamgoat28 3 года назад

I have the same problem.

@miriamgonzalez1394 2 года назад

I have the same problem. But i'm going to put a frame around the class..good luck with yours. Ea

@glendagaines8887 4 года назад

This great but my problem is the edges over the windows It would need something to hold it together while it’s drying. Or do you think it would even hold it together? Or how long would it need to dry? Thank you very much

@petervonpanda 4 года назад

I think you need these. amzn.to/2UJESQP

@mrupert22 4 года назад

I tried this. Temporary solution at best. Ultimately a new top is what is needed.

@petervonpanda 4 года назад

Mine’s still holding

@ohboy2592 2 года назад

This will not work. You need automotive adhesive. GM has a hood product and I’m sure others do too. Now he will have to replace the top as the fabric is contaminated. $5 cost him a couple grand.

@jr42a1 Год назад

Actually if you knew what you were talking about you'd KNOW that proper protocol is to replace the entire top.Your advice on the GM product is completely W R O N G ! ! ! !

@kat13man 3 года назад

You da man. Thanks.

@nathansultze2321 4 года назад

has the glue held up over time?

@TheSickest666 4 года назад

Probably not

@bsacks979 2 года назад

I tried to fixed my Spyder convertible problem like this problem. I did what he did and only after 2x pulling down my soft top the glass came lose again. Once you reglue the seal, let it cure, Etc and eventually use the car and attempt to take the soft top down your glass WILL fall down it become loose again. You can’t mimic a factory seal job at home. Between the windy conditions when the roof top is up, moving the soft top up and down and Etc, will eventually cause the rear glass window to fall become unsealed again. Afterwards a professional repairer tried to fix my soft top window in the same manner. The glass came loose after 2x moving my soft roof down and up. I note this guy doesn’t demo opening up the car roof and reclosing it AFTER he “fixed” it.

@josephgarcia9905 6 лет назад

I dont know if you should use dirt as an abrasive. I'm interested to see how long it held up.....

@remsoyl900 5 лет назад

Long enough to get paid

@rhettoracle9679 6 лет назад

Very informative. Will the automotive Goop work on trim? My chrome edges over doors got loosened by an aggressive car wash machine. Thanks PS Great car! Sometimes a cloth or foam pipe wrap over center top support can eliminate sags.

@JasonSmith-qx3zh 6 лет назад

Scott Mannear 3m adhesives probably would be better for that Mannear.

@melindalamb4701 2 года назад

Did it hold?

@brandon6333 4 года назад

is this still holding up? my mustang isnt getting water anymore but now im just worried over the course of a few months it will come back. im talkin pools of water in my back seats.

@petervonpanda 4 года назад

Just drove it today and it’s still holding strong!

@paducahgal21 2 года назад

Yes puddles in my back seat

@williamshuff5699 2 года назад

Same issue with my mustang. Obviously ford didn't do a great job sealing them lol

@chadsnoke6671 6 лет назад

Six months later, did this fix stand the test of time? Summer heat has a way of relaxing glue, I hope this is a permanent fix!

@dontswin 6 лет назад

How did the glue hold up, we'd like to know?

@chadsnoke6671 6 лет назад

dontswin you need to use a two part epoxy.. I tried many glues and the only one that held was a two-part JB Weld from Lowes.

@dontswin 6 лет назад

Thanks for that, I use it often around the house. I am still thinking about tackling the entire top replacement job. It sure is a lot of work that way. I just don't know if I want to spend nearly 8 hours on that project. By the time I get all the stuff together, thats an easy 2 hours alone.

@chadsnoke6671 6 лет назад

dontswin I ended up buying a marine vinyl and then using magnets to hang it in place and then glue it into place. It's not the prettiest, but it has held up very well. I only drive my TT with the top down, so it works for me.

@dontswin 6 лет назад

I am going to try to get a piece of that marine vinyl and cut a it like a D shape since there's no way I can stretch the 2 bottom layers onto the lower edge of the glass. There is too much of a gap especially the top layer. Where can I get this marine vinyl? I can run a bead of epoxy down the sides of the glass maybe only the lower 10" then across the bottom and glue to the existing outer layer. Now I know why my daughter was having so much trouble getting the front of the hood to set down and be clamped easily. The canvas has shrunk too much thru the years. I mean it is a 2001 Sebring.

@francisniestemski2440 2 года назад

Did you have to use any clamps or magnets to hold the glue in place.?

@petervonpanda 2 года назад

I just used tape, but I learned that they make window clamps for this type of thing. If I was going to do it again, I would buy a set of them.

@ijl66 5 лет назад

I tried this on my Audi a4 cab with this product and sadly it didn't work. The rip is getting bigger!

@lionyleftwich4418 4 года назад

He sewn the top on and told a lie on this video.No convertible top comes sewn to the insulation like that when they should be so they'll never break

@simonsays8935 Год назад

@@lionyleftwich4418 Noo he didn't sew the top on. You told a lie. It does not matter if the top comes sewn to the top. Even if it was threaded to the top and then separated the glue will bond the 2 pieces back together. Put your mask back on and shhhhhhhh.

@Rene-uz3eb 9 месяцев назад

I've used rhino glue before which laster 2 years, but still is tight on about a quarter of the window and the good thing about it is it looked like new, because it's like epoxy super thin. The problem is it will never last everywhere because it's rigid and won't deal with uneven forces. Regarding goo or M3 window weld, intuitively I don't trust it. How on earth are you going to ensure there is a thick enough layer? To keep the window in place you have to compress it while drying. None of the windows I've seen in yt videos looked flush with this method. With the rhino you don't have that problem, it needs to be tightly pressed like super glue. And I think the window weld is meant for sealing windows, like windshields, rather than glueing. That's why it comes in a giant tube. So this is what I'll do. The main issue is getting a seal against the rain. For that, the lower half of the window must not have any gaps. Upper doesn't matter. I'll use 3M extreme tape, which is still holding in more than half the places I stuck it about 8 years ago. The problem was, I only used a few strips to hold it in (proving it's super strong), but the gaps without tape led to rain leaks. This time I'll try to unroll the tape in one piece on the lower edge, while holding the upper piece in proper position with a few strips of the tape, so the lower part will be flush. Around the lower corners I'll have to cut a few pieces, have to figure out how to position the tape without gaps.

@thomasharris5151 6 месяцев назад

A member of the Sky - Solstice forum used the 3M double strength tape too and had great results! I may try this first since it’s instant

@Rene-uz3eb 6 месяцев назад

@@thomasharris5151 It should work well, if you haven't used anything else like rhino already because it leaves less surface that's even to stick to

@michaelcrisp2239 4 года назад

Does not work. 3M window weld does

@dsmchick935 4 года назад

Do you know if that window with the defrost lines on it can be tinted

@michaelsassman9883 4 года назад

Check your state laws but most likely it will be illegal as tinting a front or rear window is usually illegal, some states it's illegal to tint them at all, some states the front window can have the top tinted and such

@popeye16221 4 года назад

Yes I know and it can't be tinted as heat will break along seam

@mikeutsey 4 года назад

Mine is tinted after market....its been 5 years since i had it tinted with no issues

@RaulUrroz 5 лет назад

I have this issue with my 99 mustang. How long does one have to wait for the adhesive to set(dry)?

@petervonpanda 5 лет назад

I waited three days on mine to be safe and it seemed to be permanent. Not sure what the minimum time is through.

@RaulUrroz 5 лет назад

Peter von Panda Thanks for the reply. I was told 5 days but was skeptical about it.

@PHOTOGRASPER 5 лет назад

How did it hold up?

@RaulUrroz 5 лет назад

@@PHOTOGRASPER didn't hold up well, but that was due to the person I had do it for me( not a pro).

@moussamiller4812 2 года назад

My celica back window completely fell off 😭😭

@alancsalt 3 года назад

On the link "No longer available"

@petervonpanda 3 года назад

This link should work geni.us/t8xq

@drodwanolangeni9696 3 года назад

Where can I get this Goop Glue please help me 0618574933 or my email address is emmanuelodish@gmail.com

@travelling_daisys_dollies7656 3 года назад

@@drodwanolangeni9696 You can get it on Amazon

@maries2946 6 лет назад

Jesus Christ loves you and he’s coming any day now like a thief in the night!!! All the signs are here right now!! Stay Focus & close to Jesus!!! We are in the “End Times” of Mankind on this Earth, give your life to Jesus Christ and he will save you from God’s Wrath which is destruction on planet Earth!!! Jesus Christ is the only way to be saved!!!