No video :(

How to Hammer Forming - Shaping Metal With Hand Tools

Подписаться 47 тыс.

Просмотров 224 тыс.

50% 1

How can you go about shaping metal with hand tools alone? Follow along as I demonstrate how you can begin shaping metal with hand tools only. We will explore a How To Hammer Forming demonstration.
We will hammer form some tank end caps. Hammer forming is one of the oldest, simplest, and least expensive ways to shape sheet metal. This is a handy metal fabrication technique you NEED to learn. Check out the video!
-----------------------------------------------------------------------------------------------
*** Lancaster Shrinker Stretchers: www.trick-tools...
*** Shrinker Stretcher Combo: amzn.to/2Dy4F86
*** Shrinker Stretchers: amzn.to/2G0yCMG
*** Hobart Clamp: amzn.to/2DTULeG
*** Martin Tools Body Hammers: amzn.to/2FX52rf
*** Snap-On BF612 Compact Hammer: store.snapon.c...
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/2zWG7RS
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2hLODi9
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
Follow Me on Instagram: @ HotRodHippie - / hotrodhippie
Follow Me on Twitter: @ Hotrod_Hippie - / hotrod_hippie
Follow Me on Facebook: / hotrodhippie
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out.
Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them.
#hammerforming #sheetmetal #metalshaping

Опубликовано:

19 янв 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 262

@HotRodHippie 6 лет назад

Do you use Hammer Forming? Would you like to see me go more in depth with this topic?

@sculptivefab1086 6 лет назад

@HotRodHippie what gauge steel are you using in this video?

@HotRodHippie 6 лет назад

Andre Ladegaillerie this was 20ga steel. Sorry I edited out where I said that for the sake of time. I knew I shouldn't have.

@kustomkid4460 6 лет назад

Yes let’s see more in depth hammer forming. Thanks.

@jorona6236 6 лет назад

Yes do so

@Iceis_Phoenix 6 лет назад

HotRodHippie one DIVINE 🔨

@smportis 5 лет назад

More hammer forming and metal shaping! Keep this art form alive! The examples of your large complex pieces are fantastic. I'd love to see a time lapse of a big project with details on all the tools and techniques as you encounter different shapes and challenges.

@OldJoe212 6 лет назад

Watched 1 video and he said only use steel for forms. I'm glad I found your channel. I don't need to make anything now but the knowledge is good to have. Hope to see more hammer forming. I'll be subscribing. Thanks for taking the time to share your knowledge.

@HotRodHippie 6 лет назад

Joe Atwork who said to use Steel for forms? There is nothing wrong with that but it is by no means the only option. I have done two more hammer Forming videos since this one. Check out more of my stuff to see!

@retiredtom1654 6 лет назад

I had never watched this process done. I had no idea a few simple tools could do so much (in the right hands). Thanks for the introduction video, well done!

@HotRodHippie 6 лет назад

Glad you enjoyed it. The goal of this series was to show exactly that, you can do a lot without needing a lot. I want to show the complex and the "simple" so folks aren't as afraid of trying it out for themselves.

@foreverwood1963 4 года назад

I can't believe how much I like this video you teach very well. I was trying to find something where I can learn to do the bodywork on my 61 Chevy truck with hand tools, this is a start.

@HotRodHippie 4 года назад

Glad to help your journey anyway I can. This technique can get you out of a lot of complex shaping situations. It’s time consuming for just small parts but it works.

@garrydeimert7397 4 года назад

You're explanation of the whole process is spot on and I could actually listen to you , great work

@kenhynes6976 5 лет назад

All of the instructional videos I have seen from you are very well done and very useful. I would like to see more of metal working with ordinary hand tools, inexpensive ways of working with metal as not everybody can afford the professional tools.

@HotRodHippie 5 лет назад

Thank you. I am always trying to add simple shaping project to the video list. More will be coming eventually but at a certain point I will exhaust them and have to move on to using the equipment too.

@Rignold 4 года назад

Fantastic video to get the idea across of what's possible with hammer forming. I'd love to see more hammer forming tutorials.

@HotRodHippie 4 года назад

I've done two more Hammer Forming videos since this one, you can check them out here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0GbooPGeM7g.html And ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1WO69ygwfmc.html

@brandellworks8769 6 лет назад

YES! Keep going, would like to learn more

@MrBruce0777 11 месяцев назад

Nice Video thanks for sharing surprised how simple the process looks to get the piece done. ,

@shawnbottom4769 5 лет назад

Excellent narration explaining what you’re doing. This video is awesome!

@HotRodHippie 5 лет назад

Shawn Bottom thank you very much!

@mxcollin95 6 лет назад

Good video man...learned a lot as this process is new to me. I definitely like to see more hammer forming projects. 👍

@HotRodHippie 6 лет назад

Thank you. I've made two more hammer Forming videos since this one. I'm sure there will be more.

@igolopez Год назад

THANK YOU FOR THEACH THIS AMAZING TECNIC, IT'S REALLY USEFUL IN MY WORKSHOP.

@southernexposure123 5 лет назад

Thank you. I want to make a few small tanks and this gives me a good start.

@HotRodHippie 5 лет назад

Glad to hear it is going to help you 👍👍

@jorona6236 6 лет назад

Love the hammer 🔨 idea!!!i made one as soon as I got in the garage... thanks bro for awesome tips.. very knowledgeable

@HotRodHippie 6 лет назад

Hope the method works out great for you!

@TheHorsebox2 4 года назад

An excellent channel. You are gifted indeed, and it's great to get tuition from one so talented.

@HotRodHippie 4 года назад

Thank you, it is greatly appreciated. 👍

@wyattoneable 6 лет назад

I just found your channel and will be watching more videos. Thanks for the instruction to metal forming. I can use this!

@HotRodHippie 6 лет назад

Thank you. I hope to keep on making content folks want to see! Feel free to suggest anything you would like to see.

@snoopu2601 4 года назад

Make since to me for hand forming I was doing this before RU-vid I wish we had it in the 80's 90's to share information back then it was very few of us that were building are own Kustoms. In my area.

@marywert5988 3 года назад

Just discovered this channel. It is AWESOME and your explanations are FANTASTIC!!

@michaelb4060 5 лет назад

Nice video. I was looking for more auto body repair work hammering instruction, but I really liked your video. I will have to watch more. I do some CNC machining. 6061 is pretty soft so you may be disappointed with the durability if you drop the form or have a mis-hit. If you can find someone local with a CNC lathe you can easily make some of your common forms for diam and radius from 1018 steel. Mild steel is also susceptible to drops and hammer hits. You can get them heat treated for a reasonable cost so you will never need to make them again. If you can find people who need your services you may be able to trade so it is no out of pocket cost for you.

@HotRodHippie 5 лет назад

Great input. Thank you. I have a couple friends with that kind of capability one even heat treats his own stuff.

@leeszymanski1162 6 лет назад

like to see more on hammer forming...... doing a great job

@steamdean100 5 лет назад

I was told by an old boy panel beater, if you can't make the panel with hand tools, you shouldn't buy expensive tools. Nice video.

@HotRodHippie 5 лет назад

I do believe it is important to know the principles behind each way of shaping. Knowing how to use a power hammer is excellent but without knowing what it is really doing its easy to make mistakes. 👍👍

@johnkuzma7066 4 года назад

Thanks, this is very useful for copper boiler smithing.

@HotRodHippie 4 года назад

Glad to be any part of your metalworking journey.

@tomcoryell 5 лет назад

Great work Hotrod Hippie! I’m going to have to build some custom panels for my VW bus and your vids help.

@HotRodHippie 5 лет назад

Thank you, I'm glad to hear it. Hope it goes smooth for you!

@luzgonzalez2838 5 лет назад

Like the way you teach ; excellent videos .Thanks!

@HotRodHippie 5 лет назад

Thank you very much, it is appreciated. 👍👍

@Gichanasa 5 лет назад

Kudos to you sir, fantastic work you are doing! Thank you for sharing the knowledge.

@HotRodHippie 5 лет назад

Thank you very much. It is appreciated.

@luzgonzalez2838 4 года назад

Really helpful video.Thanks HRH!

@petermartin9478 4 года назад

Well done ! And just what i needed . Thank you !

@brettjmc2764 5 лет назад

This was really helpful for a cover on a door pocket I was trying to figure out how to make, thank you!

@HotRodHippie 5 лет назад

Glad to be of help! 👍

@tomferguson4996 6 лет назад

Nice job! I can't wait to get out into my shop and try it!

@HotRodHippie 6 лет назад

Glad to hear you will give it a go. Practice makes perfect. Or at least better, ha.

@LightsLamps 3 месяца назад

Nice work.

@ActiveAtom 6 лет назад

You do nice hand work, I am just adding metal (aluminum) forming into my skills of being a precision machinist, I would like to know how to do this and you are helping me learn here, thank you.

@HotRodHippie 6 лет назад

Active Atom I am glad to hear this helped. I hope my videos continue to do so.

@garygerard4290 5 лет назад

thank you for posting - I expect to use this technique in my hobbys

@HotRodHippie 5 лет назад

Thanks for watching and commenting. I hope you find many uses for this technique and it's variants 👍

@anthonythomas280 6 лет назад

HI I LOVED WHAT YOU DID WITH THE PLY AND HOW YOU SHAPED THE METAL TO MAKE A BEAD TANK ROLL I AM 78 YEAR OLD CHIPPY AND I AM DOING A 1936 MORRIS 8 AND I NEED TO MAKE THE RUNNING BOARDS OR LONG STEPS EACH SIDE OF THE CAR I HAVE A BEAD ROLLER,BUT NO TANK ROLLS TO FORM THE LONG CORNERS WOULD THIS METHOD SUFFICE. HOPE YOU ARE ABLE TO UNDERSTAND THIS AS THIS PC LARK IS ANOTHER FOREIGN THING ALL NEW TO ME .I DID MY FIRST CAR AT 70 IT KEPT ME OFF THE STREETS FOR 5 YEARS. ALL THE BEST AND THANKS TONY T

@HotRodHippie 6 лет назад

It would be a lot of real estate to make them running boards that way, but yes this method could be used to do that. Without seeing the exact setup it is hard for me to say if another way would be better. So that's the best I can offer.

@joehaney5482 4 года назад

Very informative, I would like to learn about the different hammers used (metal vs nylon) & modifications done to different tools used to for forming

@HotRodHippie 4 года назад

That sounds like an excellent video topic. I will add it to the list. I did a video explaining what the designs of different body hammers are intended for already: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gRhosSyIWLQ.html But your idea sounds like a good addition to that information.

@julianfisher6373 2 года назад

Very interesting & a neat idea ! Great video & well explained. Please keep them coming.

@jameskelly9800 2 года назад

This is exactly what I needed! Thanks!

@mattpolitzer2920 5 лет назад

Thanks. Maybe do video shaping that form with your router. Simple forming solutions are most rewarding. Good hammer technique explanation also. Keep em coming. Cheers, Cyclefrog

@GenerationGap69 5 лет назад

very cool video

@HotRodHippie 5 лет назад

Thank you very much

@larrysullivan6536 6 лет назад

Brilliant well explained

@HotRodHippie 6 лет назад

Thank you

@jlunn900 4 года назад

Genius thats all i can say. More videos please. Would love a tour video of your shop and projects if you dont mind. Im building a flatfender jeep and looking for inspiration anywhere i can find it

@HotRodHippie 4 года назад

I have a Shop Tour series where I show behind the scenes in various shops and companies. From small one car garages and basement shops to larger scale companies selling products. I believe every shop has the potential to show some unique details that people can learn and get ideas from. As for my own space, there are some reasons that I have avoided that to this point. I will get to it eventually though. Check out the Shop Tour Playlist for inspiration: ru-vid.com/group/PLbz6McLd1t0VEOkc4F7F1fLlbr856Ry72&feature=share

@jlunn900 4 года назад

Perfect sir. Thank you much

@richardmiller3781 4 года назад

Very nice

@HotRodHippie 4 года назад

Thank you 👍👍

@kylereyner9592 6 лет назад

My new favourite channel👍

@HotRodHippie 6 лет назад

Kyle Reyner thank you very much. I hope it continues to be!

@ludzinc 4 года назад

Top stuff! Thanks.

@HotRodHippie 4 года назад

Thank you!

@aarondalton2223 6 лет назад

I enjoyed this video.

@HotRodHippie 6 лет назад

Aaron Dalton thank you very much. Glad to hear it. I just did a second video about hammer forming and have some more coming.

@dong1872 4 года назад

Excellent video!!

@HotRodHippie 4 года назад

Glad you appreciated it, I am happy to provide content like this. 👍👍

@mattklein6942 3 года назад

U rad a f! I totally flip hammer as much as possible to keep my eye and hand coordination and cause ...well.. . We jus do! Appreciate your sharing of knowledge. Gonna peep out yo other vids🤟👍💯

@CarswithNash 3 года назад

Good stuff!👍 I’ve been enjoying your videos.

@phillypauly 5 лет назад

really well explained

@HotRodHippie 5 лет назад

Thank you!

@malcolmyoung7866 6 лет назад

Great explaination and many thanks for sharing. You have just gained another subscriber...

@HotRodHippie 6 лет назад

Thank you, glad to have you here! I hope you continue to enjoy my videos.

@nathanchalecki4842 5 лет назад

Me too.. subscribed

@hotrod1ish 6 лет назад

Keep the wood...Just go harder and treat it... great vid's and keep them coming. They just helped me to decide to hammer out side covers my scooter.

@HotRodHippie 6 лет назад

hotrod1ish I have some seriously hard stuff that a woodworker gave me. I use that to make random tools and chisels for shaping. I may have to try it for a hammer form. Glad to hear you are going to give it a go!

@RobMitshi Год назад

thank you, making corners for my speaker build, have some sheet so here i am hahah

@cmiimages Год назад

End caps for oil/water tanks can be made far easier by roll forming on a lathe and much more accurate to. But hammer form is all good if that's all you have, keep up the good work.

@fabiandaroca 5 лет назад

First time on your page. Very Impressed to say the least. Not that I'm working on cars but this process comes in handy with small projects that I do. Thank for the lesson!!!

@HotRodHippie 5 лет назад

Glad to hear it. You can do a lot with these hands on techniques. Thanks for commenting.

@MikeVieira 4 года назад

Dude! Awesome video!! That center console is badass as well!!

@dnai777 5 лет назад

This instruction video is awesome! I was unsure about the properties of metal and am amazed about the "shrinking" effect from hammering! I love to learn things like this and you're a fantastic teacher! Thank you! D Oh yeah, I'm a new subscriber!

@gilbertbaker4647 4 месяца назад

Great video!!!! Thanks a lot! But questions: Does it make things easier to score the sheet metal first. I will have 304 stainless sheet (.036") laser cut and I can easily add score marks. Should I add any? If so, where?

@BoxcarsGarage 6 лет назад

Enjoyed your hammer form vid! Thanks. That's one Snap-on Hammer I don't have.....yet

@HotRodHippie 6 лет назад

Boxcar's Garage thank you. My latest video that I just posted this past weekend is all about that hammer actually! 👍

@BoxcarsGarage 6 лет назад

I'll check it out, thanks. I'm just starting my metal fabrication endeavors. Trade a sub and see what my application of hammer forming will be applied to. Thanks

@rodtaylor1676 3 года назад

what type and thickness of aluminum do you use for making items like the AC vents?

@caseyostrander503 6 лет назад

Very informative. I wonder, could similar techniques be applied to a square shape? I need to fabricate floor patch panels for my truck and they’re not available anywhere. Solid video!

@fishhuntadventure 4 года назад

Casey Ostrander Yes. Not to take anything away from the hippie but there’s a couple other sources I’ve learned from... Not RU-vid but look up “this old tony” for a ‘202-series’ college class. Another different approach is the incredible panel making shown in RU-vids by metalshaper.

@JOEGGGJOE 6 лет назад

Awesome video. Live that hammer, preety cool.

@Urobam 5 лет назад

Thanks for sharing. How many videos I have watched where it requires welding. I don't have any equipment to weld. Please, can you show or if you have a video where you can show how you create larger pieces. I just happen to find you, it will help me quite a lot instead of having to figure how to weld and buy equipment. Thank you

@HotRodHippie 5 лет назад

Nadia Mubarak I will eventually be doing videos about much larger pieces. Right now I'm trying to focus on smaller basics as it's much easier for me to produce videos about and explain. It is rare I create something that doesn't require some welding though. It's just a fact of metal work. Maybe a fender for a motorcycle or a seat pan for one. Aside from that I generally weld things. It's the only way to seamlessly attach parts together. I'll give it some thought though. Thank you.

@pekkahallikainen2607 6 лет назад

you are true master 👍👍👍👍

@HotRodHippie 6 лет назад

Pekka Hallikainen well that is greatly appreciated. Thank you

@supersonicCoach 6 лет назад

Really usefull video, like hammer forming videos

@motorv8N 5 лет назад

Terrific lesson - thank you sir! Would love to see more forming. Maybe in conjunction with welding up a complete piece like a tank. Also leading too pls if you do that ever.

@HotRodHippie 5 лет назад

Thank you, I'll definitely be doing more projects like that. Except lead work. I do not believe in it or do it ever. My personal opinions and feelings there.

@motorv8N 5 лет назад

Interesting about the leading - is it the toxicity? Just looking to learn more. I do a little building and restoring old boats and motors and was wondering if leading would be a viable way to fill a dent in an old metal tank I don't want to pull.

@HotRodHippie 5 лет назад

@@motorv8N It isn't the toxicity. Most commercially available "leads" are not as toxic as the old stuff. It is corrosion inhibiting and quality of work. If I overlap a panel I mask off my welds and then primer/paint the area to prevent rust. You cannot do that when leading as the torch burns it away. Also the heating process can create steel that is likelier to rust later on. So if any water intrudes or gets trapped it will rust easier. I cannot remember EVER stripping lead off of an old car and not finding quite a bit of rust underneath. I did a video just recently about "Overlapping vs Butt welding" you can check out here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yjjmlEhT_go.html My second problem is that in my experience Lead is used as a bandaid for bad work. I very rarely see it used in any other way, even strict restoration work. It is most often folks figuring "I can build up a bunch of lead to fill in these deep dents and blend it out." and for some reason they feel that is better than doing the same thing with body filler. Lead sleds back in the day were built that way because they didn't English Wheel out shapely panels that had the shape they wanted. They cut up and pie pieced together existing panels then paved over them with lead. Not a quick answer but those are my feelings on lead. I'll do a dedicated video someday with examples and a better thought out explanation.

@motorv8N 5 лет назад

Ah - got it. Thanks so much for this detailed response. I've been watching some leading videos and no one ever talks about the downside that I've seen so far so good on ya. I'll check out that other video on welding joints.

@dancatalanotto3093 4 года назад

I have a question. I started by making a buck and attempted to hammer 16ga steel over it. A noobie mistake. Clearly, this steel is too thick. I am trying to make patches for the rusted floor of a car. Anyone know if 18, 19, or 20ga will actually work? I can deform the 16ga, but not shape it in detail. Any help?

@HotRodHippie 4 года назад

Unless you are talking floor braces, 16ga isn't common for floor pans. I'd absolutely recommend trying 18, 19, or 20ga. If your floor has larger areas to span between braces, 18ga would be the way to go. If you don't have that far to span, 20ga should be sufficient. 19ga is what I'd say is the most common thickness of material on classic cars, but it is hard to come by usually. I only know of one person who gets it and they have to buy a LOT each time they order it as their steel supplier doesn't stock it normally. I'd love work with it more personally.

@goldenmath4091 6 лет назад

Time+skill+love = awesomeness

@HotRodHippie 6 лет назад

It is amazing when you can do when you out your mind to it!

@goldenmath4091 6 лет назад

HotRodHippie true man, from a blank sheet comes creation, its what this world seems to have lost

@ReiMonCoH 2 года назад

I did a canteen cup lid out of stainless basically like that

@Hearts4Mavi 5 лет назад

thank you!!! this gave me an idea. i really want to get into metal shapping. with this process i would be able to make a motorcycle exhaust correct? finding an exhaust tube and welding end caps to seal the tubbing.

@baldrehdead 5 лет назад

Good explanation. Thanks for making the video. For larger pieces such as the center console, do you still use the clamp plate concept and then weld the holes closed?

@HotRodHippie 5 лет назад

Yes I did exactly that. Use as many guide holes as deemed necessary and weld them up when finished.

@baldrehdead 5 лет назад

Thanks!

@sailingyemaya9781 5 лет назад

Good video

@HotRodHippie 5 лет назад

Thank you very much

@Jean.silva_cme Год назад

Great video! is it possible to hammer form a pot out of stainless steel?- I want to do a personalized canteen. similar to the german ww canteen, but out of stainless steel

@KUGW 4 года назад

would using a harder wood last longer, or making them out of steel plate. I have a few large steel plates and am going to be hammer forming myself a steel chair top. This video helped m figure out some new skills I didn't know I might have lol.. oh and Mc Hammer once said "Hammer Time" lol

@HotRodHippie 4 года назад

You absolutely could do that. If I were producing numerous pieces off of the same form I'd at the least use a harder wood or make a metal form to work off of.

@bensmetalshapingshop 6 лет назад

One tip , use a better sturdier table so all your hammerblows have effect..

@pitboss1970 6 лет назад

Hey Alan, how much differences is there in hammer forming steel from aluminum. Great videos

@HotRodHippie 6 лет назад

Aluminum is much easier. My latest hammer Forming video I formed an entire piece out of aluminum. I did it in short order. I'd venture to say it was close to how long this one steel component took me. Steel takes more time and physical effort but is the same process overall.

@daveremian6324 5 лет назад

Good job

@aarnialeksis 4 года назад

Is it possible to hammer a 3mm thick metal plate to 1-2mm?

@HotRodHippie 4 года назад

Yes BUT doing so is not recommended. Doing it by hand would be VERY difficult. It would also be very hard to make the piece a uniform and consistent thickness. You are much better off buying the material thickness you need.

@SvetiMFNikola 6 лет назад

Awesome content.. 😁

@HotRodHippie 6 лет назад

NickMode Projects thank you very much

@Bricktop1253 6 лет назад

You're video was very informative. What gauge of sheet metal do you normally use in your creations. I want to do some metal forming.

@HotRodHippie 6 лет назад

Bricktop1253 it depends on the vehicle I'm working with or what I'm creating. 18ga and 20ga as he most common sizes I work with though.

@MrNightwalker66 4 года назад

Have you ever tried hydro forming with 10 ton press. It would be much faster and more complex shapes

@HotRodHippie 4 года назад

I have not. The issue with press forming is the need to make a male and female die fairly precisely to achieve similar results. I've seen it done with great results but usually only for small parts like recessed pieces. Hammer forming can be done on shaped panels also. Doing that on a press would be even more difficult to get right. I will have to demonstrate what I mean about that in the future.

@ariovistus22 4 года назад

I would like to know gauge of metal you were using.. and what would be the lowest you could bend/form in this way..

@HotRodHippie 4 года назад

I believe this was 20ga steel but I don't remember for certain. 22ga is the thinnest steel I've used in Hammer Forming. You could likely go thinner but I have no call to ever so so. Or did you mean Numerically smaller, aka thicker material? In that case the thickest I've done is 16ga. You could do thicker with stronger clamp and forms and a lot of effort.

@Shakerhood69 6 лет назад

Nice work

@HotRodHippie 6 лет назад

Thank you

@sleephourofmotivatwakeupas6512 3 года назад

You're awesome

@joshneretin281 5 лет назад

Hey great video and thanks. I'm a light fixture designer wanting to shape hexagons/octagons/diamonds etc. Can this mold to shape work or you think I'll need a stretcher/shrinker. Thx

@HotRodHippie 5 лет назад

Thiz method might be useful for you. However I would say you will. Need a shrinker stretcher setup. This is a wonderful operation but if you are trying to make pieces over and over again mixing up the steps is probably going to be smart. Hammering every single piece would be tiresome and beat up your hammer forms. And some of the shapes may not turn out as well as they would with a few minutes of shrinker stretcher work.

@joshneretin281 5 лет назад

Thanks for the advice! looking forward to the next video.

@pheenix42 6 лет назад

Solid info. Have you ever considered metal spinning for some circular projects?

@HotRodHippie 6 лет назад

Alonzo Branson I would love to try it, however I don't have access to the equipment to do it. And making my own would take up space I need for other machines I use a lot more. Someday hopefully.

@hkdl8743 5 лет назад

hello there i am making a custom honda goldwing and i have got to form around a wire mold how can you help never done anything like this before

@HotRodHippie 5 лет назад

I'm not 100% clear on what you are looking for. However you can check out my third Hammer Forming Video. It may give you some ideas for what you could do. I used that design to hide fuel lines. Wiring would be basically the same idea. I'm going to start a few motorcycle projects on the channel soon. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1WO69ygwfmc.html

@fishhuntadventure 4 года назад

HotRodHippie Wire mold isn’t for wiring. It’s a way of developing a three dimensional form. Like 3D CAD wire forming does but tactile and not abstract in context...

@HotRodHippie 4 года назад

Doh, I must have been half asleep when I commented on this. I (and most folks I know) call those a Wire Form or Wire Buck. My mistake. I have plans to do videos on this topic in the new year.

@fishhuntadventure 4 года назад

HotRodHippie HotRodHippie I read this as a complex shape development/design question. Wire mold in that case isn’t a raceway for wiring. It’s a way of developing a three dimensional form in sequential stages in three axes instead of by sculpture or virtual reality. Like 3D CAD wire forming and modeling does - but more tactile and not as abstract in context or imagination...

@hawkdaddy64 6 лет назад

Would it be too difficult to create metal heart with round over edges?

@HotRodHippie 6 лет назад

hawkdaddy64 it would be doable. The hard part would be the point protruding outward and the crease between the two halves. The crease would be a stretched section and depending how harsh of a crease it is, it souls be very focused stretching. I'd be wary of tearing the metal in there. You'd wNt some type of chisel like a plastic Corking tool to get in there and crisp it up somewhat gently.

@afterhours39 4 года назад

What would you suggest for 10 gauge steel? Would this work, or would different tools be required?

@HotRodHippie 4 года назад

It could work but it's gonna be tough. You'd have to make a strong aluminum or more likely steel form to hammer the 10ga around. As well as using some bigger hammers. And quite possibly eating up the metal to make it maleable. Not something i would normally recommend but you don't have a ton of choice to move that heavy of metal.

@afterhours39 4 года назад

@@HotRodHippie Thanks for the insight. Enjoyed the video.

@keithseifert 4 года назад

Is it possible to make something without putting a hole in the middle of it?

@HotRodHippie 4 года назад

Absolutely. The hole helps to keep the piece from sliding around and to locate all the pieces together properly. Without the hole you'd just need to make sure you put it in the right spot and clamp the top piece down hard enough. Personally I find welding up the hole easier than not having it if I don't want my finish part to have said hole. For this instance the final piece gets a larger center hole cut in so it just makes sense to keep it.

@keithseifert 4 года назад

HotRodHippie okay thanks for the helpful info! Trying to replace some old tin toy parts

@larrynewingham1494 4 года назад

Wow

@mikeward2922 3 года назад

What's the best method for folding about a 1/16" edge lip on all sides of a rectangular piece of metal where the corners and edges make it look like the entire piece was stamped vs. cut and folded flanges? This would be a piece replicating a factory console insert. The original insert has a raised edge all the way around the entire piece.

@HotRodHippie 3 года назад

If it was me, I’d cut and fold it, then TIG weld the corners up and grind them smooth. That will be light years faster and smoother than any forming operation. The other other option I can think off hand would be actually making a stamp and having it pressed. That is a science all it’s own. Hammer forming small and fine details is difficult. It is doable but tedious and you will absolutely still end up having to weld together some pieces anyway.

@mikeward2922 3 года назад

@@HotRodHippie thanks man. definitely seems like the way to go

@bernardomartineztari 3 года назад

I love your technique, and I think this is exactly what I was looking for! I have one question for you, however. If you had to do a square form (with round corners), how would you do this? First get a rough shape of a cylinder and then fine tune to a square? Or start with a square shape already? Thank you!

@HotRodHippie 3 года назад

Just go right for your finished shape. Reshaping one shape into another is just going to turn into a mess. Depending on your final shape I’d probably make the part in pieces then weld them together but that’s hard to say with just your description.

@bernardomartineztari 3 года назад

@@HotRodHippie Thank you for your answer! Let me describe it in a more detailed way: I am trying to form a shower flange. It is a box shape, about 1/2 in to 2/3 in deep shape, smallest being about 2 in in side length, largest being about 2.5 in in side length. Because of it being a square, I am afraid the corners are going to look goofy (where should all that excess material go). I have measured and have determined a gauge 22 will work just fine. Do you think this can be done by creating a square-shaped wood form and using a dolly and hammers? Thank you again!

@MsPierre1122 5 лет назад

I would like to see more videos on making other shapes and sizes.

@HotRodHippie 5 лет назад

If you haven't seen I have done two other hammer forming videos since this one. Both two different shapes involving other techniques. However I will do more in the future. 👍

@Justmyopinionlol 6 лет назад

your body is 21st century but your head is so 19th century and the skills you teach us is so 16th century.

@HotRodHippie 6 лет назад

I have to say I thoroughly enjoy that description.

@michaeltubbs4606 5 лет назад

It's some awesome "16th century" craftsmanship. I learned a lot from this short video. Thanks for sharing your knowledge.

@HotRodHippie 5 лет назад

Thank you for watching and commenting 👍 👍

@phat-motoxer9022 5 лет назад

Knowledge is king, doesn't matter what centry it's good to learn from those who know

@hmarvin5044 5 лет назад

Ja ja ja es verdad , se parece a Abraham Lincoln y lindon Johnson y toda esa gente

@bateman9mm681 4 года назад

pro tip: use a heavy workbench or table that's bolted to the floor. When your table is moving with every strike, it's taking away from the energy you're trying to put into the work piece.

@HotRodHippie 4 года назад

Solid point. Even a very hefty table walks around under this guy of force I find. When I get situated in the new shop a new bench for these videos is top priority.

@chris5540 6 лет назад

I need to do the top of the wings on mgb. The beads are rusty so I'm getting rid.

@livefreeordie9542 5 лет назад

Wouldn't it be more efficient to make a tool/dye that can be used in a manual press to make several endcaps?

@HotRodHippie 5 лет назад

If you were producing the same shape over and over again and had a large enough press. Also you'd have to have the ability to accurately machine forms with the proper clearances. To do all that would require big chunks of metal, a lathe or mill, large press (likely 50 ton or higher) and an intimate knowledge of proper die design. Versus hammer forming. Which literally requires. Some plywood and a hammer at the minimum. This demonstration was to show the simplest parts I use this process to create. It doesn't come close to showing the versatility of the operation. To create a press form for every operation that I use this for would take a significant investment of time and money. So yes you could do that, but it's impractical even on small scale commercial applications. I know some manufacturing companies that use this process over pressing small runs of parts.

@livefreeordie9542 5 лет назад

@@HotRodHippie thanks for the response and explanation. Appreciate it.

@DemonDNF 5 лет назад

You might want to soak your wooden forms with tung oil. It will increase the hardness a LOT. I believe the Chinese used it to fabricate armour at one point, until their enemies found out flaming arrows did a number on the Chinese soldiers. :D But used in a shop, wood soaked in tung oil and allowed to dry COMPLETELY is not dangerous; unless you want to heat treat the metal while it's still on the form. :)

@HotRodHippie 5 лет назад

DemonDNF that does sound like s pretty good idea. At least for when I make forms out of something other than MDF. I may give that a try next time I intend to keep a form for a while.

@nealordelheide5206 5 лет назад

DemonDNF m

@dillwiggle2 6 лет назад

Did u hack off the end of the snap on hammer ?

@HotRodHippie 6 лет назад

Dill Wiggle sorry I missed this comment. That SO Hammer is a special one that has no pick on the backside and a shorter front face. But it also has material added around the handle so it still has a decent amount of weight to it. BF612 is the part number.

@adamsilesia5753 4 года назад

Try doing this with a large top plate that is bigger than the part.

@HotRodHippie 4 года назад

How would you strike the material if the clamp plate was larger than the material being shaped? It would cover it so you simply could not... Am I missing something about your suggestion here?