How to Hand Lay Real Carbon Fiber Wrapping / Skinning Tutorial

Подписаться 41 тыс.

Просмотров 375 тыс.

50% 1

In this video I show you how to hand lay real carbon fiber and wrap / skin anything in carbon fiber! I demonstrate by covering a 3D printed part in carbon fiber for an upcoming custom headlight project for my Corvette.
For this project, I used System Three epoxy resin and 2x2 twill weave carbon fiber to get that awesome look. As an Amazon Associate I earn from qualifying purchases (at no extra cost to you):
System Three Epoxy Kit:
amzn.to/3zI7kZk
Disposable Measuring Cups:
amzn.to/3zKdcB7
2x2 Twill Carbon Fiber:
amzn.to/3cHmQeL
Alternative Epoxy Resin Kit with Measuring Cups:
amzn.to/3bgntLZ
Watch as I take you through the wrapping process step by step, from prep work to polishing your carbon fiber piece.
If you have any questions, be sure to ask in the comment section. I try to respond to everyone.
Also, check out my channel for the entire build of my custom headlight project!
Thanks for watching!
****************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► www.paypal.com/donate/?hosted... ☕
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► / embracemaking 📷
If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting...
DIY and MAKER:
► The Hacksmith
/ @hacksmith
► Adam Savage Tested
/ @tested
► Thomas Sanladerer
/ thomassanladerer
Car Content:
► Mighty Car Mods
/ @mightycarmods
► Drivetribe
/ @drivetribe

Наука

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 366

@stupidassol 7 лет назад

really appreciate the time and effort making the video! this is the way "how to" or diy videos should be made. informative, not repetitive, still gives the viewer their option of how they want their application to be, and effective. thanks again! Cheers!

@EmbraceMaking 7 лет назад

Thanks for the kind words Gary! I appreciate it, and thanks for watching!

@MBZS500 5 лет назад

Omg so much work. I have a new appreciation for carbon fiber parts.

@EmbraceMaking 5 лет назад

Yes, probably why some cost so much!

@rebel450ca 8 месяцев назад

The instructional quality of this video may be one of the best I have ever seen. I stumbled upon this after looking for some more videos about carbon fiber vinyl wrap and this makes real CF look doable if I just have the time and patience and this video.

@EmbraceMaking 8 месяцев назад

Wow, thanks! Glad you enjoyed it, give it a try!

@Popsm0ke 3 года назад

I was looking into how to lay carbon fiber fabric and this video is well made you deserve a sub.... So there you go

@EmbraceMaking 3 года назад

Thanks so much! Glad you found the video useful :)

@seankemp5315 4 года назад

Excellent tutorial

@Casloveskim 6 лет назад

best video ! thnx mate

@EmbraceMaking 6 лет назад

Thanks for watching!

@hhattingh 3 года назад

This is great! How would one handle deep indentations such as for holding sockets or other hand tools? (Without creating folds)

@PaulQuito21 4 года назад

Do you have any links on the hardware and consumable used? Great video thanks!

@reynaldguibone4859 5 лет назад

Hello Sir. Thanks for sharing this video. May I know the materials, tools and equipment you use in this video? Although you said it in the beginning but I want to know the brand of it because I am going to search for it in the internet to see the specs of it. Because their are things that we call it differently. Sometimes we use different term. Thanks.

@FTsingos 3 года назад

Thanks for the awesome tutorial. I BELIEVE I will be able to tackle a project I have. I have a flimsy plastic plenum from a supercharger kit. The plenum "balloons" under boost. If I wrap it in 2x2 twill, will it make it more rigid?

@firstnamelastnameisallowed7943 4 года назад

One thing I wanted to point out is when you went to apply the second coat of resin you said to make sure that it's tacky still and not set up all the way. Then you did the unthinkable!!! You touched the part. LoL, I painted cars for a very long time and people would walk in the booth and say wow that looks wet then stick their finger in it always right in the middle of a panel too! It looks wet because it is wet! Always touch the tape area were resin got brushed onto or any drips that came off it just to make sure its not still wet due to mixing wrong or your clock is wrong and its only been 20 minutes not 3 hours or bad resin sometimes. Anything can happen, just use caution when you touch the part because you can damage the weave then your screwd pretty much. Everything else was really rad to see take shape and i dig the video for sure! Thanks for sharing it with us!

@EmbraceMaking 4 года назад

Good suggestion! Next time I could even deliberately get some resin on the tape to do as you suggest.

@firstnamelastnameisallowed7943 4 года назад

Im not trying to say do this or do that at all so dont take it wrong. Simply making suggestions that could assist you if you do another project like this. At the end when you polished it with the power ball, obviously that is one way that works. Another that is very good just to have for small parts like this or scratches in the actual car is those headlight repair kits. The one that has the sand paper and compound and the foam and wool pads that can be changed out on your drill. Its just like having a full size professional buffer but in a 3 inch version of one. Works killer for things like this and they are pretty cheap. I have done paint and auto body and custom work for 25 years now and just wanted to give a tip is all!

@krotchlickmeugh627 3 года назад

@@firstnamelastnameisallowed7943 yep i just ruined a paintjob on my airplane that took me a week to make perfect. Lol didn't wait for the 3rd clear coat to dry because I thought I used enough activator. Fucking fat fingerprint right on the hull. Deep as shit too. I wet sanded but it got all the way through every layer of clear evenndown to the gel coat. Fucking pissed. Funny because I have been painting for a long time and never made a mistake like that.

@moobeys 7 лет назад

looks good man, such a long process but very rewarding, i like to watch these videos to look for alternate methods that might benefit me, only thing i do differently is spray the part black so you cant see anything between the weaves, also instead of doing multiple rounds of sanding then laying epoxy, just lay a few coats to save time and sanding, added bonus is the chemical bond is stronger than a mechanical bond

@EmbraceMaking 7 лет назад

Painting it black would have been a good idea. Thanks for the tip and thanks so much for watching!

@bensonfilmworks7595 6 лет назад

Thanks for a very fine job of editing. Very helpful.

@EmbraceMaking 5 лет назад

Thanks for watching!

@bquattrog 4 года назад

Great video!

@EmbraceMaking 4 года назад

Thanks for watching!

@tesstickle7267 3 года назад

Definitely worth putting on some 2k clear! Protection and it looks soo much better.

@EmbraceMaking 3 года назад

Yes it is worth doing. I haven't had any issues but my car gets parked in the garage mostly so

@KennyLauderdale 4 года назад

where did you get that carbon fiber? I wanna use it on my front splitter and air dam on 2018 TA 392 Challenger

@RaviShankar8152 5 лет назад

very useful...thanks bro

@EmbraceMaking 4 года назад

Thanks for watching!

@CCR_EXOTICS 6 лет назад

After 800 wet instead off polishing clear all parts with automotive clear coat you will have better uv resistance and gloss no polishing needed you can also lightly sand again next day or 8 hours later and re clear the results will be speechless 😉👌🏻👌🏻👌🏻

@EmbraceMaking 6 лет назад

Thanks for the tip!

@player_one655 5 лет назад

@@EmbraceMaking hi.. I'm currently working on carbon fiber skinning project. I would like to ask for suggestion what is the best adhesive or base coat for laying down carbon fiber cloth on surface material ABS, PU, & plastic. Thanks

@KnightDriveTV 5 лет назад

I use the automotive clear as well...final finish FAR better than that polished surface, and like stated...UV resistant. Carbon will take on a yellowish hue unless you add some real UV resistance. You can definitely wet sand to like 1000 grit region and clear will fill in all the scratches and it'll shine like nobodies bitness.

@actfitwil 5 лет назад

is it possible to use this technique on abs plastic? will the resin melt the plastic?

@JackRR15 4 года назад

But isn't the resin basically clear coat enough?

@seankemp5315 4 года назад

Also is there a way to make the carbon fiber look matte? I want a dry carbon look instead of the usual glossy look. Was thinking a matte top coat but if you know a better way....

@seankemp5315 4 года назад

So best way to remove bubbles from resin top coat and such would be heating it prior to use fondue style? Cup in pot with hot water in pot. You think that's the way to go? Doing skinning on interior panels for my car

@REAL4wd 4 года назад

Thank you for the video

@EmbraceMaking 4 года назад

You're very welcome!

@Fonz19 5 лет назад

good stuff man

@EmbraceMaking 5 лет назад

Thanks for watching Alfonso!

@jasonw9431 3 года назад

Embrace Racing would using peel ply eliminate the waves in the resin?

@BruceMcKeever 4 года назад

This video is AMAZING and very well done! Exactly what I wanted to learn thank you!

@EmbraceMaking 3 года назад

Glad it was helpful! Hopefully you left a like to help me out! Thanks!

@BruceMcKeever 3 года назад

@@EmbraceMaking I don't hit like on any videos cause RU-vid creates a folder of videos I hit like on in my playlist and I don't like that, nothing personal but yes great video keep it up!

@huntingcalideer2972 3 года назад

Can you paint over the carbon fiber cause I’m trying to make a uav and from my research it says that carbon fiber is a good material to use but the color of the uav isn’t carbon fiber it’s like a type of gray so do you know how I can get that material on top of the carbon fiber or is it just paint

@ofrimashiah2 5 лет назад

Hi mate would you be down to make a bangle bracelet about 1-1.5 cm or half an inch for me? Also if yes can you give me an estimate for the charge? Thank you

@ricktrent4 6 лет назад

Nice video

@EmbraceMaking 5 лет назад

Thank you for watching!

@vicentecantu8181 7 лет назад

I was waiting for a vacuum and a bag lol nice method tho, I've seen your other videos and I'm definitely subscribing. Gonna make some of these in the future. Good job, sir!

@EmbraceMaking 7 лет назад

Thank you so much Vicente! Glad you enjoy my videos!

@princetonaudio Год назад

Thank You!

@EmbraceMaking Год назад

You're welcome!

@JOEGGGJOE 7 лет назад

still wavy and not that glossy. im amazed the finish on the 3d part. all that technology and such a ruff finish.

@EmbraceMaking 7 лет назад

The flat spot on the front that I focused on is very flat and glossy. The other areas that are covered by other components that I did not put any work into, remain wavy. This method is a very time consuming process but the advantage is that it does not require any investment into equipment. No vacuum pumps/bags/etc, or autoclave.

@Dg-zj6jo 2 года назад

so 5 layers with 2 hrs dry times is that correct or 5 layers with 24 hrs inbertween

@connorhill1711 6 лет назад

if I am going to be doing this process to a certain section on a fiberglass bumper that will eventually be prepped and painted (those parts taped off until clear coat) at by a shop, should I be stopping before the polishing step? Thanks

@EmbraceMaking 6 лет назад

Hi Conor, I'm not much of a paint guy but I would imagine it won't need to be polished. Primer won't be able to fill a really rough surface so it has to be reasonably smooth. The primer and paint and clear coat will likely not get the polish work done. Best thing to do is ask your paint guy what he expects when you deliver the car!

@TheSocialPraxis 4 года назад

Great video man. You explained things pretty well for almost anyone to follow. I have a car stereo bezel that I would love to wrap in CF but I'm hesitant because of the holes. For example the HVAC, power button, stereo and the cigarette lighter. I'm assuming I would have to pre-cut those out into the fiber before I lay it down with resin?

@EmbraceMaking 4 года назад

Thanks for the kind words! Yes, I would cut the holes and use some adhesive to try and wrap the cloth to the back of the bezel and hold it in place while you set it with resin.

@TheSocialPraxis 4 года назад

@@EmbraceMaking awesome, thanks for taking the time to respond 🙏. I'm actually continuing to binge on that Datsun build right now ✌️😂

@jjthejetplane781 3 года назад

What kinda spray adhesive do you use?

@jairestrada6154 3 года назад

Do u have a list of the products and materials used ?

@seankemp5315 4 года назад

Thanks in advance

@Preforms 7 лет назад

So this is real carbon fiber that'll need like a clear coat to prevent it from yellowing? I'm just trying to ask cause someone is selling some carbon pieces that he says he skinned. Just trying to make sure. Thanks!

@EmbraceMaking 7 лет назад

Some resins have UV protective properties... others don't. If the resin isn't UV resistant, it would be a good idea to spray with a UV protective clear coat to prevent yellowing :)

@Fasstv8 2 года назад

Can you skin fabric rear seat delete? I see everyone doing plastic but that's it

@seankrupp6627 5 лет назад

Question about the hole in your part. Do you cut this out before applying resin, or poke a hole through after? Do you find this is easier than drilling after the fact?

@EmbraceMaking 4 года назад

I did poke a hole through first... made it easier to locate after and then drill a nice clean hole

@GrantOakes 2 года назад

With epoxy resin you can eliminate the packing tape step covering the part as it will not eat the 3D printed part. If the part was any type of polystyrene based material then polyester resin would eat it. Just FYI for you and your viewers. Another thing you can do it use a hair dryer to apply a bit of heat, not too much, to your final coat of resin. This will lower the viscosity and make it flow for a better finish and help to reduce the number of times you have to repeat this step. Great video and workmanship!

@EmbraceMaking 2 года назад

Thanks for the post and that bit of information!

@1SmokedTurkey1 9 месяцев назад

Any tips for applying multiple layers of CF cloth? Add another layer once the first one is tacky and so on?

@GrantOakes 9 месяцев назад

@@1SmokedTurkey1 As long as the total laminate is no more than 1/8th inch (3mm) you can lay it up all together, one layer at a time so as to get proper wet out between layers. I wouldn't wait until each layer is tack free since the curing process is well started and it will lead to a weaker laminate.

@1SmokedTurkey1 9 месяцев назад

@@GrantOakes Thanks for the reply! I meant to wait until the layer is just tacky enough so that when applying the next layer of CF cloth it has something to stick to (like the function of the spray adhesive at the beginning of the video) or would that still weaken the part?

@GrantOakes 9 месяцев назад

@@1SmokedTurkey1 I understood your thought process, but there's no need to wait. Just try to keep the entire layup under 1/8th inch, otherwise you might build up too much exothermic heat and have outgassing between the layers.

@carbonxc6365 5 лет назад

Thanks for the nice video. They solely appear to be sold-out in light/medium amber color?

@EmbraceMaking 5 лет назад

For what product?

@harrispribadi6969 4 года назад

I use spray adhesive 3M super 77 too like your way. But why when i put first layer of resin. The carbon will goes up. Especially tthe edge.

@krotchlickmeugh627 3 года назад

Because you're using too much resin or to thin of a carbon sheet

@Stellarffxi 7 лет назад

I always had issues using spray adhesive.. when I'd apply the epoxy to the carbon fiber, the carbon fiber would often lose its bond with the piece I'm skinning. the best method I've found that works around this, and also possibly more thoroughly saturates your cloth, is to brush a light layer of epoxy on the part and set it under a heat lamp for about an hour (depending on dry time of your epoxy). The epoxy at this point would be tacky but not completely dry and the carbon fiber cloth will stick similarly to spray adhesive, but additional epoxy will not cause the cloth to come loose from the part...

@EmbraceMaking 7 лет назад

Hi Cory, thanks for watching! That is definitely an option and the method I used a few years ago when making a carbon fiber spoiler. I tried the spray adhesive this time because it was quicker and didn't have to wait for the resin to get tacky. However, your method will work great too!

@Stellarffxi 7 лет назад

Oh.. and one other thing I like to do is use an automotive clearcoat as a final coat after the epoxy dries because it tends to look really glossy and blocks UV rays to prevent any yellowing. Your part looks good tho =]

@4theloveoflife 6 лет назад

if I'm just doing overlays like this I will spray a mist of gel coat over it instead of using spray adhesive. When the gel coat tacks I add the carbon and let it semi dry into the carbon. Hold down pretty dang good!

@itolond 2 года назад

How does none handle parts that have countersunk recess for screws when skinning?

@johnnydeutschemark3620 3 года назад

Some company makes a UV resistant resin ( right?) which would be good for a final coat ( no? ) Can you provide a list of supplies needed to get a project like this done and where to find , say the light carbon cloth? I know where to buy sandpaper.... does West System resin work for this?

@michaelmeisman4731 5 лет назад

Very good work and a inexpensive way to get great results. That really looks like it would fin into a older Fiero also. Are you willing to share the CAD file?

@EmbraceMaking 5 лет назад

Hi Michael, I'll see if I can find the CAD file and post it up on grabCAD or something

@michaelmeisman4731 5 лет назад

Embrace Racing Do you make the headlight conversion for the Fiero with the vacuum formed clear acrylic covers.

@motomirk7002 4 года назад

COOL!!

@EmbraceMaking 4 года назад

Thanks!

@RX50cent 7 лет назад

I'm wondering how does the fabric conform to all the curves on a part? e.g. sphere

@EmbraceMaking 7 лет назад

Depending on the type of weave you use for your carbon fiber, some are looser than others. The weave allows the cloth to conform to complex geometries (within reason) to achieve the desired shape!

@salimbinshagra6546 7 лет назад

?can i using multi layers in same part to make thick

@EmbraceMaking 7 лет назад

Hi Salim, yes you can! I would recommend letting the epoxy get sticky or tacky before laying down the next layer of carbon fiber cloth.

@TheSuffamc 6 лет назад

Would this increase overall strength of a peice? Would it retain any elasticity or become brittle?

@EmbraceMaking 6 лет назад

Hi Nathan, I believe this will increase the strength of the piece, especially if there is a good bond between the epoxy resin and the substrate. However, carbon fiber is known to be brittle. There will be a loss of elasticity, and excessive flexing may cause cracks or de-lamination of the fiber layer to the substrate if there is a weak bond. Thanks!

@lucasadriaanse7253 4 года назад

You forgot one important thing: epoxy resin deteriorate in UV, sunlight. You should have buffed upto 1200 grid and then sprayed a polyurethane paint. Now you did a lot of work in vane as the product will dull in approx. 2 years outside and even slowly start to turn yellow-ish and soft. I have built a lot of carbon items for sailing yachts and always have had to apply uv filtering coats to them. Even to for instance carbon grab handles placed either side of the 'stairs' at the entrance to go down below. Not in sunlight all the time, as opposed to your light panels for your car. Another piece of advice is to always degrease your product between cured layers before you start sanding. You will sand greasy fingerprints and even a kind of greasy film that forms on top of a cured layer of many brands of epoxy after it has set or cured after some time. If you don't you will sand the grease right down into the product's skin. With a bigger chance of de-lamination. All the best, keep on fabricating nice stuff ! Lucas

@EmbraceMaking 4 года назад

Thanks for the tips Lucas! If I remember correctly, the resin I used says it is non yellowing UV resistant. Wouldn't hurt to have an extra layer of protection though. It's been a few years since I did this and honestly they look as good as new. I don't park the car outside so that may also help!

@rhinoe.gsmith794 7 лет назад

How hard would it be to carbon fibre rap a old 1974 car? If you just sanded the car back and straightened the panels then sprayed it to primer could you then instead of painting it could you carbon fibre wrap it as the final spray job so to speak ?

@EmbraceMaking 7 лет назад

Hi Rhino, you could do this in theory but I would be very concerned that the carbon fiber would delaminate over time with heat cycles and body panels flexing. If you want true carbon fiber panels unfortunately you will have to create plugs and do it the right away. If you just want the look, you can always use carbon fiber vinyl and try clear coating it to create a glossy look with depth. Hope that helps!

@Pierat253 Месяц назад

Where do you get the wrap and resin?

@TruthStoryLies 4 года назад

Can this be done on the plastic backing of the front seats? And will regular carbon fiber or prepreg be better for precision?

@EmbraceMaking 4 года назад

I don't see why it wouldn't work! I believe prepreg will need a vacuum bag and oven... you will get better results with it but it requires more expensive equipment.

@motorcyclerescuer 4 года назад

What's the reason for sanding after 24 hours? The part looks shiny and I'm wondering if you could leave it to that or sand anyway and then use clear coat?

@EmbraceMaking 4 года назад

I waited the full 24 hours so the resin wouldn't "gum" up while sanding

@NicholasWood1 5 лет назад

Do you have pictures or a video installing this part you fab/skinned?

@EmbraceMaking 5 лет назад

Yes! Check out my Corvette headlight videos on my channel. You will see the whole process :) Thanks for watching!

@robertwhite2097 6 лет назад

When doing vertical surfaces with epoxy do you need a thickener?

@EmbraceMaking 6 лет назад

Haven't used it before, I just try and build up very light coats on vertical surfaces so that the resin doesn't run.

@Rubie_the_Black_Widow_Subie 3 года назад

I’m interested in how you made your final slide with your social media accounts.

@EmbraceMaking 3 года назад

Look up "lower thirds adobe after effects" it is based on those principals!

@builditright4666 5 лет назад

Might be a dumb question buy why does every one brush the first 3 coats? Can you not spray this on? I'm just wondering because I'm interested in getting into this.

@EmbraceMaking 5 лет назад

Brushing is cheap and easy... no real tool investment

@josephjohnson6132 3 года назад

Great video! Can you advise on where to buy the carbon fiber and epoxy?

@EmbraceMaking 3 года назад

Check out "easycomposites.com"

@kamillyba 7 лет назад

What glue spray did you use before putting a carbon?

@EmbraceMaking 7 лет назад

3M spray adhesive!

@user-qp3qf4xm4e 3 года назад

Hi, great work love it! do u recommend to use adhesive glue (3m 77) for base coat ,rather then the epoxy itself? is it better? thank you

@EmbraceMaking 3 года назад

I found in some cases it helped stick down certain parts of the fabric faster to get working... but eventually the epoxy gets in there and saturates it anyways.

@garydeandeery 2 года назад

I’m having same trouble if spray glue first then the base resin don’t stick properly. Or resin base first then it’s hard to keep the edges from fraying

@Jakeutube22 7 лет назад

Do you have a brand of products and fabric you recommend to buy from?

@EmbraceMaking 7 лет назад

I've previously ordered from solarcomposites.com and they seem to have high quality fabric :)

@moosemanty 4 года назад

Could you skin a car hood if you use a uv protective resin? My paint is faded on my hood, and I just want it to look nice, but I hate all the fake carbon vinyl wraps. If so are there any particular resins you like for that type of job? Oh, and great video by the way!

@EmbraceMaking 4 года назад

You should be able to, but you would really want to make sure you have a good solid bond between the carbon fiber and the hood... I am thinking it would probably want to delaminate with the changes in temperature and all the flex in a regular hood... would be a challenge!

@zincyellowmach1523 Год назад

Fantastic guide, just wondering why the glue instead of an initial layer of resin?

@EmbraceMaking Год назад

I believe it was less sticky and messy than resin so if you mess up the placement you can likely pull it off and reposition without disturbing the weave

@politicalvegan 6 лет назад

the sanding and polishing is purely for aesthetic right? you only need to add a few layers of resin, is that right?

@EmbraceMaking 6 лет назад

Hi Jacob, the initial sanding before applying the resin is to help bond the layers. The polishing is mostly for looks. I suppose some could make the argument that the final sanding could help reduce locations of stress concentration due to surface irregularities, but your application likely isn't that technical?

@venky634262 5 лет назад

Hi, This is a great video. I would love to try it out. But the problem is with the spray adhesive. Am from India and have no clue which spray adhesive to use for carbon fiber. It would be great if you can help me out with it

@Patrick156843478 5 лет назад

It's just glue in a can honestly Elmer's would work lil

@EmbraceMaking 5 лет назад

Pretty much any glue should work.... I used spray adhesive because it is convenient for me to find.

@embe_piercing 4 года назад

Hey! Tell me please what you use to glue the material ?

@EmbraceMaking 4 года назад

just look up 3M spray adhesive!

@dave5833 Год назад

A very informative video, why not use a “ comparable gel coat” as the last coat? Thanks again

@EmbraceMaking Год назад

Great suggestion, if doing it again I would use some kind of clear coat or gel coat for best results. However, this has been holding up fine for years now luckily!

@Hi.viibez 6 лет назад

What would the process be if we want to lay it on ABS plastic?

@EmbraceMaking 6 лет назад

Should be the exact same Adrian. I use the tape as a precaution to protect the plastic from any sort of reaction with the resin. Don't want it to melt!

@herrboeing 5 лет назад

if I wanted to make anything big like a sport car body, could I use only one layer, or should I use multiple layers? and how to have a smooth finish to be painted like a metal sheet?

@EmbraceMaking 5 лет назад

This is not the way I would want to go about making an entire car body... Would be a nightmare without a proper mold.

@herrboeing 5 лет назад

@@EmbraceMaking thanks for answer, is possible to make mold for carbon parts with fiberglass?

@valeriansteiner-val390 7 лет назад

Hi,i need a link,for buy carbon fiber and epoxy...do u know? thanx

@EmbraceMaking 7 лет назад

Thanks for watching! Google soller composites!

@jumontoya2433 3 года назад

I was thinking of trying to do fenders I know it’ll take long but it’ll be a fun project 🥴

@EmbraceMaking 3 года назад

Give it a go!

@lelyandcathey 5 лет назад

Thanks for the great video. Looking for the epoxy + hardener you used, from both Amazon and System Three. They only seem to be sold in light/medium amber color? Is this what you used in this video?

@EmbraceMaking 5 лет назад

Mine look amber when not cured, so maybe just confirm with the seller that it dries clear and you should be all set!

@hoangkien7762 6 лет назад

Thanks for your video that I know 3M super 77 is very helpful for lay carbon fiber. But I have problem when I apply the epoxy to the carbon fiber, the carbon fiber is blistering, it doesn't stick anymore :(... I don't know why it happens... Do you have this problem?

@EmbraceMaking 6 лет назад

Hi Hoang, I haven't experienced this problem... did you mix your epoxy correctly?

@hoangkien7762 6 лет назад

Yes I mixed epoxy 1:3 ratio, I think maybe 3M super 77 had problem, should I use 3M HI-STRENGTH 90? And after how many layers of epoxy you use sandpaper? Thank you for answering.

@EmbraceMaking 6 лет назад

You could try a higher strength adhesive, but it may also be air bubbles under your cloth. Try smoothing them out before applying the epoxy and use something to smooth out the push the air bubbles out without distorting your weave. Only start sanding once you have enough layers such that you cannot feel the weave under your epoxy. If there are any areas where you can still feel the cloth then sanding will damage it. It usually takes 3 - 4 medium coats from my experience.

@hoangkien7762 6 лет назад

Thank you so much :)

@insanediecast1858 Год назад

Thanks for this video... Is it ok to skin up a complete hood??? I would love that for my Mustang

@EmbraceMaking Год назад

Might be okay with really good prep... but with the heat and cooling cycles I would be concerned with delamination

@insanediecast1858 Год назад

@@EmbraceMaking that's what I wanted to know, thanks for answering

@MrCeez1 2 года назад

can you use automotive clear coat instead of epoxy to harden? planning to skin a motorcycle gas tank

@EmbraceMaking 2 года назад

Needs to be epoxy. I would finish the carbon fiber part in a UV protectant clear coat to protect it long term, especially an external part like a gas tank

@MrCeez1 2 года назад

@@EmbraceMaking Copy that thanks

@RCpropo 4 года назад

Hello. Why do you use a sponge instead of hairy brush to apply resin? Thanks

@EmbraceMaking 4 года назад

Hi Ricardo, it is personal preference but I found that these sponge brushes produce less bubbles when apply resin. Give both a try and see what you prefer.

@killerklown6905 5 лет назад

What 3d printer do u use? Mine doesnt look newer that clean. Mine makes bad noticable layers in it

@EmbraceMaking 5 лет назад

Mine is a "Rigidbot Big" It was a kit style printer from Kickstarter a few years back

@Sprayedbydre 6 лет назад

How do you get the lumps (wavy) parts out? Would you have to start over, or apply more resin?

@EmbraceMaking 6 лет назад

Thanks for watching! In the video I mention that you have to go through several iterations of sanding and then reapplying resin. Eventually all of the waves will go away. Just be careful, do not sand through the resin and hit the cloth!

@Sprayedbydre 6 лет назад

Embrace Racing could air pockets be fixed?

@EmbraceMaking 6 лет назад

You'll have to sand right through them to get rid of them and then apply another coat. To remove the bubbles when the resin is wet, have you tried denatured alcohol spray, and/or the heat gun method?

@cymarmotovlog64 3 года назад

Nice

@EmbraceMaking 3 года назад

Very nice

@duanedelaney323 2 года назад

nice video overall. You have to be very careful using the blue painters tape on edges to prevent fraying - yes that prevents fraying but it also prevents the fibers from moving at the edges which is what needs to happen to conform to surfaces. The less flat the surface, the more this matters.

@EmbraceMaking 2 года назад

Good tip, thanks!

@Gcatt1 6 лет назад

Do the resins give off fumes? I see everyone doing this in enclosed spaces with no mention of the resins and you are the only person I've seen using gloves for protection from the CF.

@EmbraceMaking 6 лет назад

I would suggest working in a well ventilated area. Also, resin on your hands is a sticky mess, and carbon fiber cloth will make you itchy!

@EmbraceMaking 5 лет назад

The resins can smell... I would have some ventilation just to be safe

@Gcatt1 5 лет назад

Embrace Racing Thank you. I appreciate the replies to safety!

@NicholasWood1 5 лет назад

You can always get a respirator too if the area you are working in doesn't have the best air circulation.

@jdog4534 5 лет назад

@@NicholasWood1 with all due respect, I don't think a respirator is a substitution for ventilation. The only substitute for ventilation would be a self contained breathing apparatus (SCBA). But I'm not entirely sure. It may depend on whether the pollutant is a particulate or a gas. Particulates can be filtered, gasses cannot. If this process is gassing off the fumes, which they likely are, ventilation is a must. Again, I say this with all due respect. Its based on information I learned in an OSHA approved confined spaces class I had to take as part of my apprenticeship many years ago (mid '90s), so I might be misremembering a fact or 2. If I am, I hope I error on the side of caution.... like particulates would be anything from dust to mist...

@That1NissanGuy 6 лет назад

Did you sand the high points too much (edges and center peak) and that's why it's showing white through?

@EmbraceMaking 6 лет назад

I think it was just a poor mix of the resin and hardener. I believe it was some resin that didn't get enough hardener and it would not cure properly. Thanks for watching!

@That1NissanGuy 6 лет назад

Embrace Racing Gotcha! Do you think this could withstand engine bay temps?

@JasonStapels 6 лет назад

A few other tutorials have mentioned that it's not rare to see the through the weave in bright light and recommend you paint the part you're wrapping black first.

@daxpresuto3077 5 лет назад

@@JasonStapels Yes, you can also use a colored base epoxy like what easy composites offers: easycomposites.co.uk/#!/resin-gel-silicone-adhesive/epoxy-resin/black-epoxy-carbon-fibre-skinning-basecoat.html. This kills two birds since you get the sticky epoxy layer that will prevent the fabric from lifting, and it is colored, so no painting required.

@actfitwil 5 лет назад

Hello , Can you tell me if it is possible to skin abs plastic?

@EmbraceMaking 5 лет назад

Certainly possible :) Just protect the ABS from resin just in case!

@xloboxx 4 года назад

Hi. between layers, when I put the 5 layers of epoxy every 2 hours, do you also sand? . I do it without sanding. every two hours and the coats don't stick when you're dry and I have to level by sanding. I do not know what to do

@EmbraceMaking 4 года назад

You should sand between layers as it will help them stick together. But make sure you clean it well after sanding, you don't want dust trapped inside, it will ruin your clarity

@xloboxx 4 года назад

Embrace Racing Thanks a lot. to me is that more layers peel off without sanding although I apply them when it is sticky ... When you give the first layer in the fiber. after the other coat without sanding on top of it. Doesn't that layer come off when sanding? , Or not thick garters ?. and what do you recommend to clean. Alcohol or azetone ?. Thank you!

@xloboxx 4 года назад

Embrace Racing I am making a car steering wheel with carbon, and the truth is, your information is very useful. I am using xcr uv resin and I have already made 4 attempts because I want it perfect and when sanding the layers jump like an onion, I have not sanded between them, I apply them when it is sticky but it does not stain the hand .. but there is no way. I'm going to do what you recommend to see if it works this time. What grain do you use between those layers? 180 to 400 too ?. Thank you very much again and greetings from Spain!

@ExtraFungus 7 лет назад

I'm not a fan of exposed carbon fiber but becasue you used PLA(not a good idea at all), you'll need the carbon fiber to keep it from warping in the sun or from the heat of the light, eventually it will deteriorate being exposed outside. You should really look into PETG. It's higher temp like ABS, but it's super strong(I mean super strong, layer adhesion is a non issue) and prints more like pla. Also, that resin is not likely to do well in the sun in the future, instead of doing the final polish, you should have sprays a UV resistant clear.

@EmbraceMaking 7 лет назад

Josh Bishop thanks for the comment josh! I agree pla is a poor choice for something like this, which is exactly why I wrapped it in carbon fibre. This will give it some structure and it should keep its shape under the heat. I've never printed with petg but I use it all the time for vacuum forming my custom headlight lenses, it's great stuff. I'll buy a roll and give it a shot!

@gebongstoner7595 4 года назад

Bro.. What the ratio of the resin & adasive u mix? Thanks..

@vegardulven9515 4 года назад

2/1

@tristanneely1291 6 лет назад

after all said and done do you leave your original piece attached or do up pull that piece out??

@EmbraceMaking 6 лет назад

Hi Tristan, I left my piece in place as I intended it to be that way (it has the mounting points, it is a one off, etc.) If you are designing a plug for a carbon fiber part that you want to produce many of, you need to design it with removal in mind!

@tristanneely1291 6 лет назад

Embrace Racing thank you so much, how would I design it with removal in mind? Just curious cause I was thinking about doing fenders for a car. Please let me know what you think and how I should do it just kind of getting into do my own carbon work and learning what I can. Thank you

@mrsimo7144 11 месяцев назад

Brilliant. Thanks. What spray adhesive did you use? Thanks from the UK ❤️

@EmbraceMaking 11 месяцев назад

It was 3M spray adhesive.. it's been a while since I made this video so I don't remember the exact part number but it was a black can with some red/white writing and graphics if I recall correctly

@mrsimo7144 11 месяцев назад

@@EmbraceMaking Amazing. Thanks for your help. All the best!

@Jakeutube22 7 лет назад

Where did you get that small yellow sanding block when you wet sanding? Does it have a paticular name?

@EmbraceMaking 7 лет назад

Got it from the local dollar store. Just a regular small sanding block :)

@Jakeutube22 7 лет назад

Embrace Racing i looked around in town couldnt find one. Only ones in town were velcro kind

@geocaballero6112 5 лет назад

Were to buy this materials?? What the name of its materials.. Hope you reply.. Thanks

@EmbraceMaking 4 года назад

The main item is the epoxy resin, check easy composites website, your local composites store or some boat and auto repair shops!

@zaes121 7 лет назад

VERY VERY NICE !!!!!! can you apply the same process to parts made with Styrofoam ?

@EmbraceMaking 7 лет назад

Yes you should be able to. Just make sure your resin is compatible with the foam. Some will eat the foam and your foam mold will be ruined. If you apply plastic tape over the foam it can protect it. Thanks for watching!

@travistortorige1560 4 года назад

Look up Mike Patey on RU-vid. He builds molds using foam and has had great success. He builds airplanes and makes a lot of carbon parts.

@JohnLetra 4 года назад

you mix the resin and hardener together?

@EmbraceMaking 4 года назад

Yes the resin and hardener form a chemical reaction to cure the resin.

@christophercalimlim2213 3 года назад

Where can I purchase the hardener and resin?

@EmbraceMaking 2 года назад

check out easy composites online

@Lonnie91a 5 лет назад

When I tried it that way the first coat of resin instantly released the spray adhesive and the cloth started to lift up.

@MugenAlt236 5 лет назад

Not sure what spray glue he's using but I've had the same problem. I usually tape the excess back as well on the bottom to keep it from lifting. But I stopped using glue as a base all together. I mix a resin as a base coat then wait a few hours to get nice and tacky. I usually apply about 3 coats over it before I even touch it with sand paper. Hair dryer to heat each layer up to help the resin level properly.

@EmbraceMaking 5 лет назад

Sounds like a great alternative if you are having issues with the spray adhesive!

@garrisonk8627 6 лет назад

when i apply resin the foam brush ruins the weave, what can i do to stop this?

@TheShaddix 5 лет назад

use bristle brushes with light pressure, or roll the resin with a foam roller and then kill the bubbles with a mist of acetone or a heat gun. You can also use thicker carbon like 6k or even 12k and that will keep the weave much better than the thin 3k.

@lucasadriaanse7253 4 года назад

Another way that works well on smaller items like these made here is simply: wear the correct nitrile gloves and use your hand to evenly distribute the resin, slowly softly 'massaging' the resin into the cloth. After you poured some resin onto your item from a small cup you used for mixing the resin. There are so many epoxy types. Use a thin one that has a short(er) potlife for impregnating the carbon. But for your finishing layer you could best use a thicker (more thixotropic) resin with a little longer curing time. To give it ample time to level out. Of course all within sensible margins. It's real nice and awarding to learn more by trying several options.

@tommynguyen1220 7 лет назад

how long do you have to wait after sanding then coating another layer of resin?

@EmbraceMaking 7 лет назад

The long wait is after apply resin. I usually wait 24 hours to sand. After you sand you can apply resin right away BUT you have to clean up first! Make sure there is no sanding dust still present.

@tommynguyen1220 7 лет назад

Sounds great ! Thank you so much for a thorough tutorial helped me a lot !

@EmbraceMaking 7 лет назад

No problem! Glad you found it helpful! If you can do me a favor and hit the like button it helps so much! Thanks for watching!

@tommynguyen1220 7 лет назад

Just did ! Also sorry forgot to ask but did you use clear coat or just kept it with the epoxy & polished it ? Thank you

@meademorgan6614 5 лет назад

Does brushing the resin on, get it to fully saturate into the carbon fiber cloth? I have done tons of fiberglass fabrication and repair, and my main concern is to get the resin to fully and evenly saturate the cloth weave. If not you can get void areas where there is not enough saturation making the part weak and very brittle. I’ve seen other video’s where the part is bagged and pressurized to force the resin completely into the weave of the fabric. This is still pretty cool, can you color the resin to color match your paint, but still have the weave of the fabric show through? I have tried it with fiberglass, but couldn’t get the look I was trying to achieve. Or can you get carbon fiber cloth in the color you want, and use the clear resin. Thanks for posting, I got a few ideas from your video.

@EmbraceMaking 5 лет назад

Brushing the resin on is not the best way for full saturation and strength to avoid bubbles or voids as you suggest. This is the cheapest and easiest method for aesthetic parts that do not require great strength. Vacuum bagging would be the next best option as you suggested but it requires the investment in the vacuum and bags etc. The resin probably could be colored but it is not something I have experimented with before!