How To Hang Lights On Truss | 6 Different Lighting Clamps

Подписаться 84 тыс.

Просмотров 64 тыс.

50% 1

In this video we show you what clamps we use to hang lights on truss. We walk through 6 different clamps with our thoughts on each clamp and why we would or would not use them.
Below are links to the equipment that we show in this video:
J Clamp - currentprice.io/j_clamp
C Clamp - currentprice.io/c_clamp
Global Truss Half Clamp - currentprice.io/mini_360
Trigger Clamp - currentprice.io/triggerclamp
Yoke Adapter - currentprice.io/yoke_adapter
Half Clamp To Baby Mount (for Yoke Adapter) - geni.us/2cmsb
3/8 - 20 Bolt for Super Clamp - currentprice.io/spigot_stud
Manfrotto Super Clamp - currentprice.io/super_clamp
Wingnut Wrench: currentprice.io/wing_wrench
These are affiliate links and I may earn a commission from Amazon (and others) on qualifying purchases.
XLR CABLE BUYER's GUIDE: kettnercreative.com/buyers-gu...
PODCAST BUYER'S GUIDE: kettnercreative.com/buyers-gu...
LIVE STREAMING BUYER'S GUIDE: kettnercreative.com/buyers-gu...
MUSIC PRODUCTION BUYER's GUIDE: kettnercreative.com/buyers-gu...
CHAPTERS:
0:00 - Introduction
0:34 - Disclaimer
1:24 - Safety Cable
2:25 - Lights Don't Come With Clamps
3:25 - J Clamp
6:40 - C Clamp
10:10 - Yoke Adapter
13:13 - Half Clamp / Cheeseborough Clamp
18:11 - Trigger Clamp
22:54 - Super Clamp
25:30 - Pre-Lift Inspection
26:05 - Final Thoughts
BECOME A MEMBER OF OUR CHANNEL FOR PERKS & EXCLUSIVES:
/ @kettnercreative
STUDIO EQUIPMENT:
Camera: currentprice.io/sony_a7iii
Lens: currentprice.io/sigma_24_70
Microphone: currentprice.io/sony_lav
Studio Monitors: currentprice.io/hs5_monitor
Video Recorder: currentprice.io/ninja_v
Video Switcher For Live Stream: currentprice.io/atem_minipro
Key Light: currentprice.io/keylight
Fill Light: currentprice.io/keylight_air
Uplight: currentprice.io/astera_ax5
Truss: currentprice.io/truss_black
Editing Computer: currentprice.io/mac_mini
Editing Monitor: currentprice.io/lg_32in_4k
We Optimize Our RU-vid Channel With:
Tubebuddy: geni.us/Md6v
VidIQ: geni.us/dqUyD
Riverside FM Podcast Software: currentprice.io/riversidefm
GeniusLink: geni.us/vss0P
Website: kettnercreative.com
Instagram: / kettnercreative
Facebook: / kettnercreative
Threads: www.threads.net/@kettnercreative
Disclosure: If you purchase an item or service using one of our links, it provides us with a referral fee.

Кино

Опубликовано:

28 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@toystorybro Год назад

as a DJ purchasing his first set of lights this video was godsend with a ridiculous level of professionalism! zero blabbering and 100% straight facts and or explanation about who, what, where and why! so happy to have free content like this widely available to the public! thank you for the wonderful video guys!

@richardwood6637 2 года назад

I have never used a J clamp but I am convinced that you have it 90deg out. Surly the bolt and the long hand wheel are back to front so when hanging on a truss the curved part of the J hangs the light on the truss, the hand wheel secures it and the light hangs on the opposite end to the curve so used as an up side down J.

@V.Gandhi 2 года назад

TRUE !!

@jimc5096 Год назад

Still, after hanging light for over 40 years and having to deal with them from time to time, I have say they are a piece of junk and should never be used. Don't know a single professional that will spec them.

@etorrex 3 года назад

Hi there. Thanks for this video. Excellent explanation. Showing all models, and explaining then in order of convenience, then telling the pros and cons of every model in a very logical, natural and effortlessly way in a crescendo up to the best solution shows that you are a top-of-the-class natural born teacher. I have no words, thanks for your passion!!!

@kettnercreative 3 года назад

Happy to help

@KChiuCinematography 3 года назад

Appreciate the thoroughness of the breakdown and demonstration!

@kettnercreative 3 года назад

Glad it was helpful

@VegasVampire2010 2 года назад

I DJ’d last night at a venue with its own lighting bar. I had assumed the bar would have holes in to attach my lights, as on my own equipment. It didn’t!!!. Had no idea what kind of clamps I would need for future gigs! Now I do, thanks to your comprehensive video !

@fredwatson383 2 года назад

Very helpful. I'm new to lighting and am going to order some of the trigger clamps. Definitely looks like the best and safest option.

@nonameforu 6 месяцев назад

Great, thanks. I came here to find out ways to clamp lights to poles.

@gracepeoplepodcast5825 3 года назад

Great video! Thanks for showing how to hang with clamps that you wouldn't typically use, because those are what I currently have!

@kettnercreative 3 года назад

Happy to help!

@FadilPinandita 3 года назад

Thanks for the amazing video. Especially about the safety explanations. Currently looking for something to clamp the lights on my mini studio, but it's hard to find things that satisfy my needs for safety here in Indonesia. Keep up the good contents! Cheers!

@kettnercreative 3 года назад

Glad it was helpful!

@UOttawaScotty 2 года назад

Great video, I learned a lot from this ;)

@Shane.Russell 2 года назад

This is amazing! Thanks so much!

@kettnercreative 2 года назад

You're so welcome!

@sophiarodriguez1861 Год назад

Thank you so much for the detailed guide!!! You mentioned that "watching this video does not make you a pro". What's the real (official) way to learn mounting/hanging? Thank you!!!

@kettnercreative Год назад

The ‘official’ way is to get certified by some type of event rigging training company.

@sophiarodriguez1861 Год назад

@@kettnercreative thank you!

@DanielSRosehill Год назад

For once a legal disclaimer that wasn't BS to cover someone's ass and an actual advisory that I could tell came from the heart and from a genuine concern for safety. I've no intention of trussing myself but always wondered how you guys rigged stuff up. Cool to know and thanks for sharing!

@mike_e_allen 2 года назад

Great video! Thank you! I do have a question though, I had a truss I bought a long time ago and o-clamps. Everything fits fine. Recently I bought new lighting tripods with t-bars. The bars are 2mm or so smaller than the clamps. Even the o-clamps they sold in store were just a few millimeters larger than all the tripods and t-bars they sold in the store (guitar center). The rep was very confused as was i. Any thoughts on why the bars would be just a couple of millimeters smaller? It makes the clamps not work, obviously. And I don't like c-clamps for the reasons you stated also.

@EdArtMoment 5 дней назад

Thank you.

@burnnieholliday7205 2 года назад

I use super clamps for photography/videography equipment and was checking this out when considering adding a DMX setup to my studio. You complained about the t-handle sticking up. I’m not sure if the Manfrotto clamps have this feature but my Impact clamps have a spring handle which you can pull to disengage the handle from the bolt and reorient it. This way you can avoid them casting shadows by making sure they’re aligned to the rest of the clamp.

@ared18t Год назад

The manfrotto has the same feature.

@riftoaster 2 года назад

I’m wanting to use a trigger clamp to hang the Aputure Ls 1c LED light, but it has a support tube used for mounting on light stands attached to the yoke of the light. Any idea how I can remove the tube so I can attach the trigger clamp?

@bsledhouse6710 Год назад

Nice bro

@kettnercreative Год назад

Thanks

@stephenelliott4991 2 года назад

Nice!

@kettnercreative 2 года назад

Thanks!

@PeteYagmin 3 года назад

FYI - 25:31, your audio drops to mono (left channel only), but otherwise great video and I really appreciate the in-depth overview!

@kettnercreative 3 года назад

Ahh shoot. Thanks for the info!

@scottsnyder360 2 года назад

Thanks for sharing your insights! I ordered the trigger clamp, but the wingnut wrench on your link is not the same as in the video and it appears to be discontinued. Can you let me know which one you are using in the video... Thanks again.

@MissKarenB Год назад

If you don't have a wingnut wrench a claw hammer will do the same job in a pinch.

@brandontan4876 Год назад

Main clamps we use are Hook Clamps (G-Clamp) or Quick Trigger Clamp. Anything that is not rated or anything that does not come with data spec sheet/ meet safety standards, we will bin it. We have pretty strict regulations in Aus, also our riggers here will put you on blast if they catch / see something dodgy..... Also you never want to go too tight on the bolt (between the light and clamp), You can strip the bolt over time. You really should be able to move the fixture left to right with a bit of resistance, but not to the point it's just hanging and spinning around like no tomorrow

@DejaGruvBand 2 года назад

This video was helpful, I really like the trigger clamp but my truss is only 1.5 inches in diameter will that be a problem for hanging items such as intimidator 260?

@MissKarenB Год назад

The standard is usually F34 Truss but if you need a smaller size Global Truss has the Jr. Trigger Clamp which fits the smaller F24 Truss. The venue that I supply lights to uses triangular F24 truss and the J clamp almost exclusively. These clamps are a POS and scare the hell out of me, especially when even on a 15' ladder they are hung on truss that is over my head (I'm 6'2''). Needlessly to say, anytime one of my lights has to be pulled down for ANY reason, the J clamp is replaced. Another option if space is really tight (while not quite as good as the Trigger Clamp) is the Snap Clamp which Global Truss also has for the F24 or the F34 Truss.

@Domenooch Год назад

So the flat washer goes on the bottom and then the spring nut?

@jon8304 Год назад

Great video! A stupid question but I’ve always wondered, is there any positive or drawback to which bar you hang a light? Like in your video, assuming the light is aimed forward at the camera, is there any preference to mounting on the front bar or the back bar?

@rennoruutli5267 Год назад

It doesn't really matter. Only thing that matters is that the weight is distributed evenly. Also sometimes you can mount a light at the front and another light on the back bar.

@lokiliveyoutubestream5080 3 года назад

Hi, Thanks for the informative video, I have a question if you can help please. I recently bought lighting truss which the tubes are 20mm in diameter, I'm looking to mount a moving head fixture which is 11kg which has two fast release clamps that i'd be attaching the O clamps to. I can only seem to find clamps that fit the truss and can hold a max load of 10kg, am I right in thinking that because the fixture will require 2 clamps that it's okay to buy these ones as the two combined will be able to hold a total load of 20kg? Hope that makes sense. Thanks again!

@kettnercreative 3 года назад

Personally, I don't put anything in the air without a 2-3x safety factor. If a clamp is rated for 30lbs, I won't load it with more than 10lbs. For moving heads, I treat dual clamps like an additional safety cable. 50lb fixture - I wouldn't put less than 2 x 150lb clamps with a safety cable as well. Each clamp will then have a 3x safety factor, plus a redundant clamp. The main feature of dual clamps, in my mind, is to align the fixture perfectly straight and add an additional safety factor/margin. For my personal strategy, I want each clamp to be able to support the entire fixture (with a safety factor) if needed.

@lokiliveyoutubestream5080 3 года назад

@@kettnercreative Thank you

@ozam7350 Год назад

Where do you get the wing-nut wrench...awesome!

@MissKarenB Год назад

In a pinch a claw hammer will do the same job.

@dmedvigy Год назад

What clamp would you use to install a moving head light to a Ibeam in the ceiling (a restaurant without a truss)?

@kettnercreative Год назад

A beam clamp seems the most appropriate.

@tonybrickham842 Год назад

What kind of clamp for a square truss?

@Udrys999 Год назад

Would you consider using paracord or lashing straps instead of clamps?

@MissKarenB Год назад

@Udrys999 Год назад

@@MissKarenB Why not?

@ROCKMEETPROCUTIONS 4 месяца назад

Aye you're pretty smart

@bks252 Год назад

Never ever use a crescent wrench. Why would you possibly use one? You know the size of the nut so use the appropriate sized wrench. A crescent wrench is the fastest way to strip the corners of the nut. Good video except for that.