No video :(

How To Hardwire Dash Cam In Hyundai Palisade 2018+

Подписаться 216 тыс.

Просмотров 26 тыс.

50% 1

In this video I will show you how to hardwire a car dash camera in a Hyundai Palisade (2018+). By hardwiring the power source of the dash camera to the fuse box, it will allow for parking mode recording (you need to check if your dash camera offer this feature). The iRoad X9 dash camera that I installed in this video does have this feature. I connected the ignition 12V wire and constant 12V wire to the fuse box using Micro 2 fuse taps. Make sure you watch this entire video for all the details.
NOTE:
With the Hyundai and Kia vehicles, you may get a 'Battery Discharge' message on your dash after installing the hardwire kit. These cars have a monitoring system that monitors any devices slowly draining the car battery. It doesn't necessarily mean the car battery is too low. As long as you set the cutoff voltage no lower than 12v on the hardwire kit or dashcam, then it will be fine.
=======
DASHCAM:
IROAD X9 2 Channel Dash Camera
US: amzn.to/3L51sgt
Shop Other Premium Dash Cameras On BlackBoxMyCar Website
(US) www.blackboxmyc...?aff=30
(Canada) www.blackboxmyc...?aff=18
INSTALL PARTS & TOOLS
Micro2 Fuse Tap
US: amzn.to/3MjOVpP
CDN: amzn.to/3vzCfW0
Car Panel Removal Tool Kit 18pcs
US: amzn.to/3jGH34l
CDN: amzn.to/3ArxlcK
KM601 Multimeter
US: amzn.to/3AWHpvM
CDN: amzn.to/3J717YS
Tesa Loom Fabric Tape
US: amzn.to/3pAhtBV
CDN: amzn.to/3HJMZDw
EPAuto 1/4” & 3/8” Socket Set - 69 Pieces
US: amzn.to/2Gnwb7k
CDN: amzn.to/2lp5t8f
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com...
CDN: www.amazon.ca/...
=======
If you need VPN, get TORGUARD
torguard.net/
50% Off Code: dial2fast (does not expire)
=======
Support Dial2Fast on Paypal
www.paypal.me/...
Support Dial2Fast on Patreon
www.ptreon.com...
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.

Опубликовано:

2 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@rakish001 4 месяца назад

Super helpful video. Why so much emphasis on putting the original fuse in the bottom slot when we are putting another 10A fuse in top slot? Does it matter?

@dpeagles Год назад

So helpful. Saved me a bunch of time and energy. 👍

@amitkolte7850 Год назад

Thank you for the perfect step by step installation instructions

@paulbridges7011 7 месяцев назад

Thanks for the video. Gave me confidence to do the job and it was exactly as shown. Great video!

@antoniog7367 7 месяцев назад

This was a great video and easy to follow along. Thanks for posting it

@Pitounet60 Год назад

Thanks for sharing this setup ! It will be useful to install on a Hyundai Tucson Plug in hybrid

@douglasdever6134 Год назад

Good video; one of the best I have seen. I do have o ask, your voice sounds just like the voice from PBK that does phone disassembles.

@devbhardwaj1048 2 года назад

You make excellent content. I am installing Rexing dash in my Palisade. Thank you for sharing.

@brandongros2258 Год назад

Close enough on a 2016 Hyundai sonata simple had trouble with the head liner and the wether strip figured it out and perfect I got the connector from Canadian tire

@KarenHernandez-zq9jk 6 месяцев назад

Very good explain video thank you!!!!

@adnanemarzouki4496 3 месяца назад

Sehr gut erklärt, super Video. danke

@shaggyfilms 8 месяцев назад

Great video. Helped me finally hard wire my wife’s dash cam. Good point about the rear camera. I farted around with running the cable through the wire thing on the rear lift gate before and it’s a bitch, and that’s my work vehicle. So I’ll have fun fishing that out when i return it :(

@ulloasf9755 5 месяцев назад

Great job with the fuses nobody has better video than this one ☝️ I’m still figuring out how to install my dash cam because of this fuse thing that I don’t clearly understand my car is a bolt euv if anyone can help will be helpful.

@DproUKno 7 месяцев назад

My dashcam came with fuse taps with 15A fuses installed in the tap. Should i use the same fuse locations as you did in the video, eventhough those were 10A fuses you removed? Or should i use differnet fuse locations, and if so, which?! Thanks. Awesome video btw.

@kfdaddy 28 дней назад

I noted that with THIS hardwire kit the YELLOW wire was the constant 12V wire and the RED was the ACC wire. I have a Viofo hardwire kit for an A129 Pro Duo dashcam and the wires are just the opposite. YELLOW is labeled as ACC and the RED is labeled as the hot wire. You need to be very careful with your hardwire kit and make sure you know which goes where. Apparently the colors are not universally labeled. I had my kit installed by a professional auto alarm shop for the Santa Fe I just purchased and I think he switched the wires. My dashcam was recording 24 hours a day for several days before i caught it. I brought it back to get it checked. He would not admit he made the mistake but the dashcam now works as it's intended to.

@dial2fast 28 дней назад

Your findings are correct. There is no one standard with the yellow & red wire. Many of the Japanese/Korean car products will use yellow as constant 12V, and many of the China products will use yellow as ignition 12V. But all the products are labeled, so the installer just need to read the label.

@luistorres-my2vs 5 месяцев назад

Thank you for the video I can also do LED lights just delete a couple of steps lol 😂

@tougeu 8 месяцев назад

Great tutorial video! When you were testing the fuse, where did you place the common probe?

@dial2fast 8 месяцев назад

You can look a metal bracket under the dash and that is typically a good ground for testing.

@jthechu365 Год назад

I successfully installed a dual channel dash cam according to your instructions (thank you!) however, I have a red airbag light showing on the dashboard. Could it be I was a little too rough with the airbag in the a-line when I was trying to feed the power like through? Very worried that I damaged the airbag function now.

@jthechu365 Год назад

Figured it out - I used the wrong fuse and disconnected the airbag. Thanks for the helpful video!!

@bckim90 2 года назад

Amazing content! 👏🏼👏🏼

@trungale68 8 месяцев назад

Hi I have 2022 hundai palisade and followed your instructions, how come the Dashcam did not turn on when vehicle turn off ? Thanks

@joknd 2 года назад

I followed all the steps on this video this was super helpful. now I am facing a battery discharge warning due to an external device on my Palisade. I installed an Viofo with their hardkitwire and it is on the 12.4 V if I am not wrong. Should I be worried and uninstall the hardkit?

@dial2fast 2 года назад

With the Hyundai and Kia, you will get this message. These cars have a monitoring system that monitors any devices slowly draining the car battery. It doesn't necessarily mean the car battery is too low. As long as you set the cutoff voltage no lower than 12v on the hardwire kit or dashcam, then it will be fine.

@garyraphael4162 Год назад

Great video

@Lahud33 2 года назад

I love your instructional videos D2F keep them coming.

@user-jl5jn6yn4k Год назад

Thanks for your perfect installation instructions. But I have a small question. Does the cable line cross the airbag on the B pillar(block the airbag on B pillar)? Thanks.

@dial2fast Год назад

The cable will run parallel to the side curtain airbag, and it doesn't block the airbag.

@rakish001 4 месяца назад

@@dial2fastif it’s running parallel, shouldn’t you have zip tied it behind the airbag? I routed my cable from the floor just to have that peace of mind

@pruthvigaddam3703 7 месяцев назад

Does this void the warrenty?

@CYRAPHYM 9 месяцев назад

Superb instruction video. TY so much. Props!

@jbigjab1 2 года назад

Just bought a 2022 palisade and was looking to install a dash cam. Would like more info on the one installed in this video. Side note: where will this camera be viewable from in my palisade?

@joknd 2 года назад

I did on my Palisade 2022. I installed a Viofo dash cam with their original hardkit. Now I am receiving a battery warning. Now I am looking for more info on this

@actezla Год назад

Isn’t there a way to dongle connect power to the mirrors electric?

@mpcp27 2 года назад

Nice review... Good point about running the rear camera wire... If ever you need to replace or upgrade... Though hopefully that's only every 4 years or so.. You can also use a mobile screen protector on the window to stick the rear and front cameras on. Just a quick question, there were a lot of open fuse slots... Did you consider using some those for the fuse tap? In terms of the fuse tap orientation, if it's the wrong way around it's not that the camera will be unprotected, it will be protected by the lower position fuse (if one is there) first and then by the upper position fuse.... If there is no lower position fuse, then the camera will not work.

@404notfound..... 2 года назад

Good review, but constant battery draw of the electronics on the new vehicles plus parking mode you're gonna be over 60 Ma, better keep a boost pack in the vehicle. As well budget out for a new battery every year.

@dial2fast 2 года назад

With this dash cam that's installed, you set a cut off voltage to shut off automatically when it reaches a certain voltage. But you are correct it does add wear to the car battery. If you want parking mode recording and not use the car battery for power, your only other option is to buy a dedicated dash cam battery pack which will cost more than $400.

@ultravox72 Год назад

I presume this is the same on the Hyundai Tucson 2019?

@alhadad1979 Год назад

Do I need to protect my dash cam as explained at 10:29? Can't I connect my dash cam directly to power side of the fuse without buying this extra protection stuff from Amazon?

@dial2fast Год назад

If you shove the wire into the factory fuse slot, you should still find out which side of the fuse is input and which side is output. The reason for using a proper fuse tap instead of shoving the wire in the fuse box is because the bare wire can fray and short the fuse contacts. You might also damage the fuse slot by shoving both the fuse and wire in it and making the metal contacts widen more than it should.

@fastifico 2 года назад

professional work !! Is it the same to install on ionic 2017 ?

@dial2fast 2 года назад

The steps are the same, but fuse and ground location will be different.

@robertofratacchioli 8 месяцев назад

No professional

@leoleo1680 Год назад

Do you have any light on on your dashboard when you install the camera?

@dial2fast Год назад

With the Hyundai and Kia vehicles, you may get a 'Battery Discharge' message on your dash after installing the hardwire kit. These cars have a monitoring system that monitors any devices slowly draining the car battery. It doesn't necessarily mean the car battery is too low. As long as you set the cutoff voltage no lower than 12v on the hardwire kit or dashcam, then it will be fine.

@leoleo1680 Год назад

I have a Hyundai Palisade XRT 2023 and I'm trying to install the dash cam so I think installation is going to be the same like yours I have to plug the hardwiring at the same fuse like you did with your dash cam on your car????,my dash cam model it's a Vantrue N4 and the hardwiring, have a two wearing one ground and the other one when you connect on your fuse box so the installation is gonna be the same like you did. I'm gonna plug the wiring in the same place like you did on your car????

@dial2fast Год назад

@@leoleo1680 The easiest way to see if the installation will be the same is compare the fuse box panel between my video and your car. If it's the same, then the install is the same.

@harrycee656 Год назад

Good video. I am not sure the routing to the back is good given the side currents come from their. Now you will have a word there when the bags deploy.