How To: Honda Grom Bar End Mirrors Install! 

bar ends make everything better. I finally put them on my bonneville and not only does it look cool as hell, it feels like a different bike. It actually makes me feel more confident riding it.

After shattering a crosshead bit in those screws, I thought you were crazy when you just popped it loose with a pair of pliers. I was wrong. It really was just that easy. No heat required. Thanks for the video.

Thank you so much for making this video, I'm on my way to get a grom soon and I needed to know how to install bar ends and then I found this, loved the video keep up the good work

Damn... I was thinking about using the heat gun. Good thing I found this first! Thanks a lot man!

Informative video. Just ordered some for my '23 Monkey.

This helped me a bunch when I installed the same bar end mirrors on my Grom. Ordered some mirror delete bolt/plate thingies to plug up the stock holes though.

Ok well glad to know I wasn’t the only one to have issues with the right side. I broke 2 screwdrivers so I just said forget it for the time being. I’ll definitely try the rag and vice grips and see if that works. I have the same after market mirrors and I have the same set on my 2015 GsxR-750

Thanks for the vid, I ordered from your descriptions Friday morning and received it today, and I’m from Arizona lol, but did everything you did but with out the heat gun lol thanks! Now the bike looks a lot better than having to antennas

Bro, look how far you have come. Absolutley amazing to see honestly. Take some time to reflect on this man!! GOALS

reason for the reverse thread is because of the wind turbulence ( resistance) so the mirror will stay tight in place. , huh , odd, whoulda thought the right side would have been clock wise to tighten ..... >.> very odd indeed . to get tight screws loose , get a : TEKTON 3/8 in. Drive Impact Screwdriver Set (7-Piece) and you are set. not a larger spacer, you mean a thicker spacer. awsome vlog !!

if you use socket wrench with Philips head, it actually comes off quite easily. just make sure the philips head is nice and snugged

Awesome, just installed mine. You should do a follow up vid. Appreciate your insight.

I’ve gone threw a few sets of those Exact mirrors, on mine and my kids Groms. For the 20.00 ish dollars delivered, hard to beat. But as you stated “they’re exactly the same mirrors, as the more expensive “ these aren’t even close to the quality of say CRG or other higher end mirrors. I’ve had a few sets of these just break off, fall off. But a decent inexpensive option.

👌👌 thanks for posting these. Need to do fender delete, levers and mirrors so its appreciated.

What size spacer did you use for this install?

Mine was crossthreaded from the factory so I had to drill it out and put the expansion set on my throttle side

If it was truly red loctite then heat would be necessary but you would put it on anything that melts. Probably blue and snugged overly tight.

The other way to loosen the bolt its with a (manual) impact driver. One tap usually breaks the locktite.

Great video, thanks! Excited for the sun to come up so my ninja and I can try this!

Can you tell me the new maximum height of the bike when the mirrors are removed? Want to see if it will fit in the RV Garage. Cheers

As soon as he said someone said to use a heat gun on RUBBER... I already knew he melted something!

Hey im about to get a grom myself.. do you recommend the newer model 2016-18 or the older grom? I actually like the older one better for the looks. Oh and great channel!! Fun catching up on your videos.. how did i miss out on this channel :D

Thanks for sharing this video review and install! Very interesting ,informative and helpful!!

Hey just wondering, did you use the original bar end screw to install the mirrors? I have a honda cb 500f 2017 and when i tried to use the original screw to install it the screw was way to long

Did you roll the bike onto the lift or just pick it up? 😂👍🏻😎👍🏻

the bar end mirrors were a must for me on my grom because im a bit bigger guy and the stock mirrors were pointless haha. but looks good :). What grips you thinking of getting?

Just ordered for my Z125 hopefully they install fine

I like that you've gone with really popular bikes. Do you find that's been a real help in growing the channel?

Hello do you have the link for these mirrors? I bought one similar to this, but the mirrors are flat they aren't rounded like your for better viewing. Thank you

How are these mirrors holding up? Are u still running them?

What brand of mirrors did you buy?

what size are the threads on that bolt i bought a pair of these mirrors and they didnt come with hardware!

Do you have the link for this mirrors? I have seen something like that but they aren't rounded like yours. Thank you

Hey where did you get that wheel chock on your HF bike lift? I’m about to get that lift but I really don’t like the chock that comes with it. Keep up the vids! 🤙🏽

Do you think these would work with an f4i i want bar end mirrors and cant find a guide for the wierd honda bar cores thanks man.

I relate so much when the rear view mirrors are loose. I always have to hold the mirror.

Those pliers won't engrave into the metal at the bar end?

Can i use this for 2015 as well

But do u do if your bar ends on your grom the screws are stripped how could u get them out?

hmmm. too bad you didn't know anyone else to hit up about how to get that bar end loose....

Mate get a very wet cloth/tea towel and wrap it around the grip like a sushi roll so you don't melt the grip when you heat up the end with the heat gun :)

What kind of a washer is this,doesn’t work with a regular one

What size washers did you use?

what glue did he use on the screws i could hear or understand what he said

Hey, know this is a super old video by now but i’m having issues with one of the mirrors being too loose and folding inwards slightly with speed. Wondering if you had any ideas!

What size washer did you use in this instal?

Looks good

What size bolt fits in the stock bar ends on your grom? I’m trying to find the right fit let me know

I had the same problem, same left mirror .

Link to phone mount that can screw onto stem?

i installed them on The wrong side. And i Cant Get The end part inside The handlebar out. When im trying to take it out i only remove The screw and not The thing Thats holding it in. help?

i would have done them opposite facing downwards

Will these fit Honda foreman atv

Trying to install these on my hon mini bars and I can’t get them to work. I’m super pissed off

What size is the spacer??

what is the name of this red elevator? where can I buy one?

My mirrors did the same thing the stock ones are very bad

I bought those exact mirrors, they are garbage made out of chinesium. The metal thread stripped almost immediately.

Hey blockhead too bad you are in Orlando I’m in Panama City beach would’ve have loved to meet

Cannot budge mine 😫

Same thing happened to my mirror getting loose, and it's impossible to easily adjust. C'mon Honda...

I ordered the same ones and they are junk I ended up throwing them away.

I thought the first mod was the cutting of the umbilical cord (reference to ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-a8LYWZDmGHg.html for those that haven't seen it).

i feel so dumb for buying new grips

If you don't have stock bars this video is no good , should state it at beginning of the video dude

Not a big fan of the Grom episodes ... Good job on the video tho.

Jesus tightened your bar end? sure it wasn't budda or muhammad?

small garage