HOW TO HYDRO DIP HELMETS | Liquid Concepts | Weekly Tips and Tricks

Подписаться 37 тыс.

Просмотров 88 тыс.

50% 1

Bryan from Liquid Concepts showing you the best tips and tricks for all your custom coatings including hydrographics, cerakote, custom painting, water dipping, water transfer printing and much more!
In this video Bryan goes over some of the basic information on hydro dipping a hard hat or helmet in a hydrographic film.
**Be sure to watch till the end to see how Bryan dips helmets when the cameras are supposed to be turned off!!**
Film used in video - SKO-128 - www.liquidconc...
Paint color used on helmets - Beige Paint - www.liquidconc...
Hydrographic Activator - Liquid Concepts Activator - www.liquidconc...
Check out our Liquid Concepts Distribution Facebook page for more tips and tricks as well as sales and promotions that we run all the time! - / liquidconcep. .
Be sure to join our Hydrographics 101 Facebook Page to get all the questions answered relating to anything in the hydrographics or custom coatings industry! Tons of professionals and DIY people alike have a great time and learn everyday from questions and answers on this page - / 87168. .
Visit our website for all your hydrographics needs from film and activator to paints, neons, custom film, training, equipment and much more - www.liquidconc...
HOW TO HYDRO DIP HELMETS | Liquid Concepts | Weekly Tips and Tricks

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 77

@chrisenright7003 5 лет назад

Thanks for posting this up - big help for me - I am about to do a camo dip on a ski helmet. Cheers! Chris.

@LiquidConceptsUSA 5 лет назад

Chris you are most welcome! Good luck on your project :)

@jonnikingz8946 5 лет назад

Thanks Brian.. always usefull information.. Bravo👏 and happy new year 🍾

@slayergamingg Год назад

Love to see such things Learned something new today👍🏼

@LiquidConceptsUSA Год назад

So glad! Thanks for watching !!

@stizolac Год назад

You said 60 seconds on the timer...is that letting the activator sit for 60 seconds prior to dipping?

@supere4206 4 года назад

Love it 🕺🏻🕺🏻🕺🏻🕺🏻🕺🏻🕺🏻🕺🏻🕺🏻

@LiquidConceptsUSA 4 года назад

Us too!! :-)

@samanthamoseley9450 4 года назад

Hahaha that bonus footage was epic even though he knew the whole time

@LiquidConceptsUSA 4 года назад

We love to have fun at work most days!

@docsgaragewerks 5 лет назад

I'm going on fail #2 also,.. 3 up next.. I think I need to dance like this, and bam... Gettin it... Doc Garage Werks Upland Ca.

@LiquidConceptsUSA 5 лет назад

Yea sometimes the dancing really helps out!! lol

@RyanJameson-p9r 7 месяцев назад

Would love to see a full face motorcycle helmet dipped with some type of skull pattern

@LiquidConceptsUSA 6 месяцев назад

We've done several full face motorcycle helmets. Maybe check our Instagram & TikTok !! Thanks for watching !!

@kloohn 3 года назад

How grab you the helmet secured ?

@blairbroderick3734 2 года назад

Very cool . I think I will have to get into this business

@isaacwulf4918 4 года назад

Do I have to remove the snaps, for the football helmet chin strap, before dipping? Also, can I just dip a clean helmet or do I need the primer?

@aceladia1023 Год назад

How about the full face helmet.i always get error of it 😂 its so complicated .can you make a tutorial for perfect deep? Thanks bro

@ltsky311 2 года назад

I love how you said temple area and then proceed to point to your forehead. ROFL.

@LiquidConceptsUSA 2 года назад

ROFL

@rickjay1266 5 лет назад

Great Vid.. Happy New Year

@chrishartley6411 4 года назад

What's the spay you put on the film after its in the water ? What you sprayed out of the gun? Can I get it from Lowe's , homedepo ?

@LiquidConceptsUSA 4 года назад

This is a specific spray that is used specifically for the hydrographics. Here is a link to purchase it - www.liquidconcepts.com/shop/product-group/supplies/activator

@MikeConrow 5 лет назад

How do I know which side of the film to face up or down

@LiquidConceptsUSA 5 лет назад

Wet both your finger and thumb and touch both sides of the film for a few seconds. The side that sticks to your finger goes DOWN on the water.

@MikeConrow 5 лет назад

Liquid Concepts, LLC... I would like to hydro dip my baseball helmet and I already have my film. Where can I find cheap activator? I don’t really want to spend $20 on it.

@WmHarks 5 лет назад

I wanted to ask if dipping a Ops Core fast bump helmet is any different then dipping that Team Wendy helmet? Since the fast helmet has the built in shroud I've seen many of them in Multicam where it's not covered correctly or almost not at all? Also if the film covers the helmet holes when should the film be removed from the holes? Right away or before the clear coat? Im getting ready to dip my first ops core fast helmet and would love to get your advice!Thanks

@WmHarks 5 лет назад

I'm talking about the built in shroud not being covered correctly and i dont want that

@LiquidConceptsUSA 5 лет назад

Sometimes because of the way the parts are dipped, they cannot go into every groove correctly or they need to be dipped a different way to make the film go into the recessed areas that you are talking about with the multicam pattern. Most of the time you will not remove any film from the holes because the film does not add any thickness to the part. The only thickness will be your paint, primer and clear coat that you apply.

@redbaron2448 4 года назад

Does the water have to be a Certain degree?

@LiquidConceptsUSA 4 года назад

Normally we recommend 80F - 90F degrees

@redbaron2448 4 года назад

@@LiquidConceptsUSA how do you prevent wrinkles or creasing when I lay my feet in the water it's wrinkly chose after I dipped. Thank you

@MikeConrow 5 лет назад

Do you know where I could buy a cheap activator for the Hydro dip... i’m not trying to spend much more than $10 on it?

@LiquidConceptsUSA 5 лет назад

I dont think there is anybody out there that sells activator for that cheap. This is also the cost of doing business and if you want something to work right most of the time there will be a small premium to pay or sometimes that product is just that expensive because of the materials that it takes to make it.

@Twiskee 5 лет назад

How do you prep the helmets before the dip?

@LiquidConceptsUSA 5 лет назад

Most of the time we blast the helmets, flame treat, adhesion promoter, primer, base, dip and clear coat.

@SASHA.bosnia 2 года назад

is it alright to drink the water in there before the film is put on and the activator is used? because i work at my cousin paint shop and he saves us lots of money drinking out of it and i just wanna make sure i’m not being lied to because recently i have been very concerned about my health…

@LiquidConceptsUSA 2 года назад

You should be concerned !! Don't drink the water !! Pro Tip- Buy a case of bottled water !!

@immersiongraphics4665 4 года назад

Good sir

@fakaralte4277 3 года назад

Can you do Anime

@thundercat_945 2 года назад

Is it possible to hydro- dip a USAF Thunderbirds helmet pattern on to a paramotor helmet?

@LiquidConceptsUSA 2 года назад

Send us a pic of the helmet, we will go from there. info@liquidconcepts.com

@cab7159 4 года назад

What the best way to clean residue off after dipping so it's ready for airbrushing or clear?

@LiquidConceptsUSA 4 года назад

Are you referring to excess pva?

@clennonfrasure4098 4 года назад

What paint are you using?

@LiquidConceptsUSA 4 года назад

Here is the link - www.liquidconcepts.com/shop/product-group/paint

@CarlSchattke 3 года назад

How much would it cost to make a custom pattern from a circuit board design?

@LiquidConceptsUSA 3 года назад

We can do it! Email us what you are looking for and we can get you a quote. info@liquidconcepts.com

@12up4down 5 лет назад

I've been struggling with my full face helmet.... 2 fails so far

@LiquidConceptsUSA 5 лет назад

OH no! Sorry to hear that! Hopefully some of our videos will be more helpful on getting you back up to speed!

@sendnewbsskydiving7616 5 лет назад

Can you use any primer or is there a specific primer for this

@LiquidConceptsUSA 5 лет назад

We use our DTM Epoxy Primer to get the best adhesion.

@noelchristophersanchez3863 4 года назад

Hi mate they want me to hydro dip dis helmet

@LiquidConceptsUSA 4 года назад

Congrats!

@ryanr4181 2 месяца назад

OMG. can I please send you my shoei helmet I just bought it it’s brand new and white I been looking for graphics or something. Can you please do mine??

@LiquidConceptsUSA 2 месяца назад

Yes, you can. Send us an email - info@liquidconcepts.com We will get you a price!!

@treykearns4867 3 года назад

This is essentially the essentials you guys, pay attention... essentially. ......🐘l💨🔥💥💥💥... Essentially.

@LiquidConceptsUSA 2 года назад

Thank you for watching ....... essentially

@treykearns4867 2 года назад

@@LiquidConceptsUSA hell yea! This guy knows whats up! The essentials..

@viktorperalta3090 5 лет назад

I saw many guys applying this method but never how you can create you own artwork or patterns . Is not way to do it by my self or have to neccessary buy it already made.

@LiquidConceptsUSA 5 лет назад

We can actually create any custom film that you may want.

@viktorperalta3090 5 лет назад

@@LiquidConceptsUSA how much you charge , by square foot?

@LiquidConceptsUSA 5 лет назад

Sometimes there will be a design fee from $20-$75 depending on the amount of work involved and then its a standard charge of $34.99 per meter (48" wide x 32" long).