Just need to add to the long list of people who would have likely given up on using sticks if it were not for your key binds. Thank you for continuing to help the community.
Great tutorial and your control install works pretty darn well! I'm excited to get using the new binding profile. It's so much more extensive than what I had previously imagined having.
I'm just starting (first time with flying games too) and your guide and files have reduced the stress involved when learning to fly so that I can enjoy the game much faster than I anticipated. Thank you!!! Your effort is very much appreciated!
Ecouté avec les sous-titre et vraiment merci beaucoup du Québec j'ai vraiment eux aucun souci !! je me suis senti prendre par la main et c'étais super, je vais pouvoir allez me crashé maintenant le temps de prendre l'habitude 😄😄 5 étoiles comme les café que je t'ai offert car vraiment tu m'a soulagé d'un gros poids.
Thanks you sooooooooo much, I was struggling with T16k duo on target, with your work you let novice like me touch the joy of flying experience with stick and just for that Thanks !!
Once again, Thank you!!! Love how you have all the MM stuff on the right stick (t1600)...taking a second to get used to it, but it makes MM "flow" so much better!
bro....i cant thank you enough. honestly. im the dumbest when it comes to all this. ive been putting this off for months coz i was intimidated by setting it all up. im so excited to practice using dual gladiator nxt with L OMNI. now i just gotta remember all the different buttons lol. thanks man. honestly. made my night sorting all this out.
Thanks Buzz your setup tutorial is the best out there by a zillion. My setup is dual T16000M and I’m loving it. I have however hit a snag and I’m and not sure how to correct it. So, I’m very new to SC. I have gone through the mining with handhelds and the ROC and I have now ventured into salvaging with my newly purchased Vulture. Everything was going well. Managing to scrape for RMC, fracture hulls and disintegrate. But then I went to carry out a spacewalk so that I could move the cargo from the salvage ship onto mine, but when I entered space from my ship I instantly froze and could not move in any direction or look around. My breathing motion was still visible, just no movement or looking around. I tried using keyboard and dual joysticks, but to no avail. The only way I have found to get to work so far is to reset all controls to default and then spacewalk works fine using keyboard and mouse. I tried setting up my joysticks again, but it sucks when it is not your setup. Hoping you may be able to help me out. Cheers.
Naberius here Buzz, you are a legend. I have your 3.23 bindings installed on 2 computers and 4 VIRPIL sticks. Everything functions flawlessly. Great work and thank you sir !!!
thank you buzzkiller for your continued development of the key bindings for star citizen. you work is sincerely appreciated. i havent used my sticks in ages but i will be looking forward to using your binds and my sticks again soon
You are a life saver! I have used nothing but your method and binds for 4 years now and swear by them. Thank you for your time, effort , and help to this community.
Really appreciate you keeping the support homie. still my favorite set up and swapped sticks and STILL this is the best. hope one day you wont need the joy2key but goodness it really makes it so i barely have to touch my keyboard while playing
this is main problem for me, i always play SC only from time to time and every patch my keybinds get messed up. There were moments, where i wanted to check new patch, but didn't, because i did not want to spend couple hours to set my keybinds over again. You are doing great job, thank you
This literally saved me! Was getting into bindings and thought NOPE! gonna play something else. Then I found this tutorial! Thank you so much for all your hard work. I can confirm as of this 3.22+ bindings update there is no need to 'resort joystick numbers' and all bindings loaded correctly eg mining laser, primary weapon fire etc for the thrustmaster fcs HOTAS set up. Above and beyond my friend. YOU FKN LEGEND!
You just helped me out sooo much with this. I can't express enough how your guide is just so awesome, so $25 worth of thanks sent your way. Top job, muchas gracias and all that.
Excellent video, and excellent grouping of the binds themselves (conceptually); they all immediately make sense in my brain! I especially loved the way you've grouped the weapons on S1 and S2 for the triggers. I'm using VKB Gladiator Evo's and apart from some inversion settings/swapping the stick numbers around with the console code within SC, the only thing I noticed was that the pinkie buttons (modifier/decouple) were on opposite sticks to the diagram. Probably something on my end but super minor and it works for me anyway.
@@BuzZzKillerThank you! Everything is working perfect now per the chart. I should've tried that before I used the console command. Thanks again for the profile, these binds are very intuitive and well put together.
You're amazing for putting in so much time like you have! You saved me hours and frankly in Star Citizen I'm having a rough start so getting a break by not having to struggle with key bindings is huge. TYVM!
Thank you very much for your efforts on the bindings. I have used your bindings as my starting point for a long time. quick note though; when I updated to the current bindings today, interaction mode was not bound. I know enough to get it squared away for my bindings; just letting you know it is another that didnt work. using dual T16000 for reference.
I'm a new player and its a some THANK to do that !! really a great one . Its step by step and we have to follow ect. For me i never play its a some i can find everything Thank again ++
Thanks for doing the heavy lifting for the community and you even quickly replied to my previous comment when I was having trouble. Shout out to you, youve earned my like and sub.
Going back in for 3.23 and I see that you have a profile setup. Bro, thank you. Are you on Patreon or something? Have used your settings for bout 3years now. Really appreciate your efforts. Please keep at it. CIG should send u an allowance or something.
Thank you very much, I'm not using your profile but the binding chart and the video helped to create my own. As I'm using joystick gremlin with two sticks and a throttle combined into two devices.
Just for you to know if a friend didn't show me this video i would not ever changed from hotas to dual because of the pain it is to map everything, the sticks are working perfect and thank you so much for doing this !
Thanks, amazing as always. In the notes you mention: Troubleshooting: 1. Make sure that you don't have any extra input devices connected when you start Star Citizen as this can cause the bindings to stop working. Disconnect these: Gamepads (wireless and wired), Extra Joysticks/Throttles, Rudder Pedals, One Handed Game Keyboards (Like the Razer Tartarus), 3D Mouse, or Mouse with analog joystick on it, etc... These are fine: Standard Keyboard, Standard Mouse, Track IR, Tobii, Game Glass, Cameras, VR Headsets etc... Have you heard any issues with Elgato Streamdecks?
I would like to add to your point about the z axis on the t16000. It will become shaky very soon after you start using them but there is a fix, lots of videos on RU-vid but basically involves opening up the stick and putting some lubricant (wd40 or silicon) over the sensor. Seems a bit of a faff but it will be rock solid after that. Just in case anyone is on the fence because of that issue. It's very fixable.
Thanks a ton for doing this for us. I had an issue where no matter which slot I plugged the two sticks in it was showing my left stick as 1. I found out in the settings/Configure Joystick, Advanced tab I could specify a preferred joystick number and swap them out.
First of all I just want to say thank you for all the hard work and effort you put into these key binds every update. As a community, we really appreciate it. That being said I just have one issue with the 3.23.1 update for the VKB's. When I hit the cycle camera view keybind it automatically puts me in free look mode too so when I move my left stick it will strafe left/right, forward/back and pitch the camera up and down and left right as I move it. I've already reset the bindings to default and loaded the new keybinds multiple times with no luck. Thanks in advance
Thank you so much, I am new to the stick life, and I just got my VKB's today I was so lost, someone in sc fb group sent me your link and im already up and going. Get a coffee on me!
Absolutely loving this set up for the T16000m. I bought my first ever dual sticks last week and the set up looked frightening until I found this, via a recommendation. Has anyone experienced an issue with the Modifier (left trigger) where it stopped recognising the mapping? I have checked the joytokey setup and all the bindings are still there when I test the buttons but in Star Citizen nothing that has been mapped to the trigger is functioning. Thanks in advance for all the work you put in to this
As always, i love your layouts and all the work you put in. I have a few questions though. Firstly, sometimes when importing the binding profiles, certain binds are missing, have you been able to determine what causes this? Secondly, im curious as to your process for creating and maintaining so many profiles. I make a number of small alterations to suit my preferences which isn't too tedious as patches are rare but if you have a particularly clever methodology Id be keen to know. Ive been considering tracking the CFG files in github so i can visualize the diffs between releases and more easily focus attention. Finally, do you have an existing issue/feature request for native modifier support i can upvote? Has CIG ever commented on this? Thanks as always for your diligent work! What sticks do you personally use? Im on dual VPC Constellation standards with Z tilt and they're lovely with your configs as a baseline!
First off to the missing binds, make sure you follow the video and readme to the T. Wiping the previous bindings before importing mine usually fixes the issue. You can also try wiping the user folder and starting from scratch. I mad a few mistakes on the keyboard this patch, so if that's where your issues lie, reset the keyboard to default. Also make sure JoyToKey is working properly as there are several keyboard commands I use instead of the joystick bindings as they work better. The axis problem has plagued my bindings for years. They refuse to bind, so I have a section in the video covering this issue. I've asked CIG on several occasions if they will be add native support for joystick modifiers. They always say yes, but its not a priority. It's been a couple years since I last asked though, so I may have to do so again and see if things are changing. The current binding menu is getting buggier and harder to use by the patch, and it really needs an overhaul. I find I have to edit the XML manually for a lot of bindings. As for methodology, I don't really follow a single one. For the most part, I like to take the previous patch bindings and test them thoroughly to find out what has changed and what doesn't work anymore. I fix what I can, then tweak button locations to make it as intuitive and user friendly as possible. I like to group similar functions together on one stick or hat switch, or button bank to make it easier to remember. Then I do another test to make sure the new button locations are easy to reach, especially for critical functions like countermeasures that you need to access quickly. Sometimes I do experiment a bit with new configurations on my personal bindings. If these work well, I implement them into the public bindings. But I try to keep the changes to a minimum so people don't have to completely relearn everything between patches. But sometimes bugs or new features arise that force me to make more drastic changes. Personally I use my Virpil Alpha Primes the most. But when I'm on the road, I take my VKB's with me as they are much more portable. I've outgrown the T-16s so I only really use them when I'm testing new bindings for them. But they the most commonly used bindings by people so I have to be careful to test them just as thoroughly as my other bindings. I hope this answers your questions. Glad you enjoy my work.
There is also the lesser known pp_RebindKeys console command. It takes one argument which is the filename and path inside the mapping folder eg. open consle and paste pp_rebindkeys "layout_BK_DualT-16_3-22v2_exported.xml" This way you can completely avoid the entering the menu to load a profile. Obviously this does not take into account the order of joystick interfaces and you might have to do a pp_resortDevices 1 2 to switch a couple of HOSAS sticks around if you're using two physical sticks
This is amazing! Is there a guide or video anywhere about doing this same thing but also including pedals? The only thing I'd like to change is binding the pedals to forward/backward thrust. Using dual constellation alpha primes and warbrd rudder pedals
Ive used your bindings for years, i was recently fortunate enough to gain a set of virpil primes. I had a question why the bindings dont 100% import. Ty for your time.
@@benvalle8253 As stated in the video it’s a Star citizen issue. The pitch/yaw and sometimes roll don’t get imported and you have to bind those manually. For the Primes, everything else should import just fine. But some sticks have problems with button 1 as well. Since we don’t use button 1 in the primes it shouldn’t be an issue.
Hey thank you sooo much. I have one question how much of the game am to play to get the user file in my directory. I played about 1hr and still not gotten it. Thanks again been with you for years now, your the hero we need.
Hey I love the video, finally found a good setup video, just want to ask did you have to purchase a licence for JoyToKey? Cause on the website it tells me there is a seven-day trial period then I would have to buy a licence key to get all the features of JoyToKey and I didn't hear you say anything about that in the video, so I just ask ya in here ^^
