How To Install A 120V AC Electric Winch| Pull Your Vehicle Into Your Garage or Shop

Подписаться 224 тыс.

Просмотров 54 тыс.

50% 1

How to install a winch on a concrete slab. A big help for pulling non-working vehicles into your garage. Ending Music: Turn On by RW Smith.
What we're working with:
Badland Winches (Harbor Freight) 120v 1500lb Capacity - $150
Red Head Trubolt Concrete Anchor Bolts (3/8 x 3.75") - $2/each
Bosch Concrete / Masonry Drill Bit - $7
► Subscribe: / carsntoys
►► Tools and Supplies www.amazon.com...
►►► Our most helpful videos (One million + playlist): • 1 Million Views Playlist
Note:
This video is being performed by an experienced tech. Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, use safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. If you don't think you can perform the job then be smart and don't. Carsntoys is a member of the Amazon Influencer Program.
Publication, reproduction or distribution of this film is strictly prohibited.
How to install a garage winch:
• How To Install A 120V ...
Carsntoys
/ carsntoys

Опубликовано:

28 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@skipperga Год назад

Extremely accurate details - Awesome job. Thank you for sharing this video. I bought my winch today from Harbor Freight - Now I have my mission! Many Thanks to you! Have a Blessed Day!

@2009mechanic 4 года назад

I'm doing this in my garage to pull dead ones into the shop. I will use the drop in inserts however instead of the studs because I plan on removing it when not needed so I don't trip over it. Next thing is to put another anchor point on the winch mounting plate so you can have someplace secure to latch the hook back into when using a snatch block in a double line pull configuration. To fill the holes in the floor when not being used , I just got the flat headed socket head screws at Lowes so they fill the holes. I also used those same bolts when mounting the winch to the plate so it sits flat on the floor.

@toddschultz227 Год назад

great video.i'm installing 4 winches on my garage floor.I put the old car on dollies and want to be able to move the car off to the side of the garage without physically pushing on the tires to move the car.20 years ago it would'nt have been a issue without winches!I figure one winch per dolly and get a straight pull.

@AI_Life 6 лет назад

This is exactly what I have been looking for, I have same brand winch and I am trying to secure to garage floor to pull my boat trailer up an incline driveway into garage. Thank you sir.

@CarsNToys 6 лет назад

Glad to help. Still working well.

@EvansBrosRacing 2 года назад

If anyone buys this from Harbor freight and ends up needing a new hand control , Harbor Freight does NOT offer a replacement . I ended up buying one from Northern Tool for the IRONTON 54129 sold by Northern , and it works like new . The new hand control even comes with the cord for just under $20.00 plus shipping . It was $29.00 to my door . I used the new controller to hook up dual controllers since my shop has an upper floor and I use the winch to open and close a trap door in the upper floor . I can now open the door before going up on the scissor lift , and can open or close it once I am up there with the other controller .

@joannehillion3571 5 лет назад

Outstanding quality video. From start to finish. Thanks.

@CarsNToys 4 года назад

Thank you. Hope it was useful.

@DIYApprentice 7 лет назад

Good explanation of the installation. Very helpful. I'm helping my nephew replace an engine in a car on which he got a good deal because it has a thrown rod. My driveway's incline is only about 8%, but I know this won't be the last time I'll be moving an inoperable vehicle. I may pick up and install one of these winches tomorrow. Thanks

@DIYApprentice 7 лет назад

I installed the winch out of site under a rolling cabinet at the back wall of my garage; the cabinet just cleared the winch by 1/4". My nephew and I used the winch to pull his 2700-lb. Pontiac Vibe into my garage - easy, quick job. A couple things I did when installing the winch: (1) I used Superstrut 3/8" square washers as spacers under the four corners of the winch. This gave the winch mounting plate bolts about 1/16" clearance from the floor. (2) I installed the fairlead bolts with the nuts facing out. (3) The front bolt that mounts the winch to the plate was cut about 1/4" so the cable would easily clear without abrading.

@CarsNToys 7 лет назад

Good stuff!

@johngranato2673 3 года назад

Got the same winch. BTW, love the car

@jarredbenson5333 7 месяцев назад

Could this winch pull a 6,000 pound tandem axle boat trailer up a 7% grade? Based on your chart, it seems like it could.

@johnsonbar5022 Год назад

The only drawback is the lack of a cable guide on the return/rewind. This missing feature will cause the steel cable to compound itself and stack cable on top of cable. Hence, a round steel cable with have flat impressions on it, in addtion to have a tendency of kinking. However, I use a clawhammer to guide the cable on the return/draw. I use the curve, or claw, to guide the cable lapping side by side of the spool. Besides that, this Badland/Harbor Freight winch is a good tool for the money. Just don't over use it for a purpose it was never designed to fit. Also, pay real attention to the electic expension cord that you use. Make sure you use 16 or 14 gauge extension cord, at a minimum. The instructions will help you select the right type and length.

@abemelendez8477 7 лет назад

Hello, I'd like to know if the mounting plate comes with the winch or I have to buy separate. thx for the video thou, very well explained

@CarsNToys 7 лет назад

The mounting plate came with the winch. Glad to help. Cheers.

@bobefitz 5 лет назад

Was the base included with the winch or do yo have to purchase it separately?

@cheesehead6710 3 года назад

How did you attach it to the base? The included bolts are too long.

@matttrotta57 2 года назад

Where did you get the chart for different inclines?

@robertd10481 7 лет назад

Great video nice detail on how to install.. look like it could help you out a lot

@CarsNToys 7 лет назад

Thanks man

@Drew_peaballs_128 7 лет назад

Nice video! What’s funny is a have a Datsun 260z aswell and that’s what I’ll be pulling into my shed 😂

@CarsNToys 7 лет назад

Thanks. It works great.

@Drew_peaballs_128 7 лет назад

CarsNToys just installed mine yesterday and works a treat 😎

@kenfritsch8749 11 месяцев назад

I need a wireing diagram for the remote handle

@dezblyan5125 7 лет назад

man that is one small garage better than nothing i guess, good Lil video thanks for sharing

@CarsNToys 7 лет назад

You nailed it. Getting the car out and enjoying the extra room is key.

@russellleboeuf8637 3 года назад

how are you powering the wench?

@freddyo2k10 5 лет назад

Did the winch already come ready with a house plug??

@CarsNToys 5 лет назад

Yes. Runs off a standard 110v outlet.

@freddyo2k10 5 лет назад

@@CarsNToys wherebdonyou buy that??

@Vera-xu3xw 3 года назад

Why wouldn't you show how you powered it? Did you convert it to AC?

@jorgev8168 6 лет назад

How did you power up the winch please?

@CarsNToys 6 лет назад

It's an AC wench. Plugs in to any 120v outlet.

@aaronfrench7299 5 лет назад

Jorge Vera great question. Mine only came with battery hook up. What did you decide on?

@gussy6783 5 лет назад

@@CarsNToys, some of the wenches I've known are both AC and DC. I'm not fond of wenches that go both ways, but I suppose it's better than having one's nuts adjusted by a wrinch.