How to Install a Bath the Easy Way - Complete Beginners Guide!

Подписаться 324 тыс.

Просмотров 29 тыс.

50% 1

In this video i will be showing you how to fit a bath. I will explain the complete process of how to install a bathtub including bath tap install, bath waste install, bath panel install, bath feet setting and even how to level and fix a bath in place. If you like the content leave a like and please subscribe for more content like this as I've got a lot more to come and there will be something that will help you out.
Tools i recommend for this job below:
🔵 Silicone Block - amzn.to/4csFG3r
🔵 Bath Trap - amzn.to/3Y9SK9J
🔵 Bath Waste - www.drench.co.uk
🔵 38mm Holesaw - amzn.to/3VUonB6
🔵 Dewalt Angle Drill - amzn.to/3VQ1jUk
🛒 My Shop -www.amazon.co.uk/shop/thediyguy
🎥 Video's to accompany this one here 🎥
Seal a Bath - • How to Apply Silicone ...
Solvent Welding - • How to Solvent Weld Fo...
Fibo Shower Boards - • Underfloor Heating and...
► BECOME A MEMBER OF THE DIY CLUB Click! 👇🏼
/ thediyguy1
► Get FULL access to the Discord Group and other perks!
Follow me on Instagram 👉 the_diy_guy_youtube
Thanks for watching The DIY Guy. My mission is to bring you the best Tips, Tutorials and Tools to help you learn and save money.
Please be advised that this is only a guide which is intended for informational, educational and entertainment purposes and The DIY Guy cannot accept responsibility for any work undertaken. Be safe and have fun! The Amazon links above are affiliate links and as an Amazon Associate I earn from qualifying purchases. I may earn a small commission if you purchase via the recommended links, however this will not cost you any extra.

Хобби

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 118

@TheDIYGuy1 16 дней назад

What other ‘complete guide’ videos would help you guys out?

@DocMcCoy109 16 дней назад

Thank you.

@TheDIYGuy1 16 дней назад

Anytime

@bobmartin5101 16 дней назад

building MDF units etc.

@ddarkblu8606 16 дней назад

adding a door to wall without a door would be amazing :) (p.s absolutely love your videos mate been watching every single one over the past few weeks)

@patrickloftus 15 дней назад

How to lay porcelain slab patio. How to hang an internal door.

@ellisruff3314 16 дней назад

Some people can teach, and some people can do an awesome job. This guy can do both. Great vid as always!

@TheDIYGuy1 16 дней назад

I appreciate that!

@dougaldouglas8842 16 дней назад

Recently fitted a nice new bath and quite frankly just followed what had already been installed, just repeated it, though good to have someone to show how it is to be done, as I know of some people who need instruction, just how it is.

@nosycatUK 15 дней назад

One of the best DIY channels

@cookiemonster2299 14 дней назад

Brilliant, the shower boards look so good too. ❤️🇬🇧👍

@michaelsharpin3369 14 дней назад

Great video keep them coming.

@OldSchoolMen77 5 дней назад

Great stuff.... Really well done job

@cprog 16 дней назад

Thank you for your great guide!

@TheDIYGuy1 16 дней назад

Glad it was helpful!

@DjGiluk 11 дней назад

Some great tips, thanks 👍🏻

@TheDIYGuy1 11 дней назад

Glad it was helpful!

@tooexplore 16 дней назад

Great video as always.

@TheDIYGuy1 16 дней назад

Thanks again!

@heathbrowning34 16 дней назад

Superb video as usual! Cheers

@TheDIYGuy1 16 дней назад

Thank you! Cheers!

@seankeane9424 16 дней назад

Brilliant, very helpful video.

@TheDIYGuy1 16 дней назад

Glad it was helpful!

@CommercialGasEngineerVideos 16 дней назад

Good explanation and good footage.

@TheDIYGuy1 16 дней назад

Glad you liked it!

@garyfrench6350 16 дней назад

Another great video 😊

@TheDIYGuy1 16 дней назад

Thanks again!

@lesterbathrooms3948 13 дней назад

Nice job 👍🏻

@user-nt4ni5ts4d 2 дня назад

Top lad very helpful

@TheDIYGuy1 2 дня назад

Glad it helped

@lesthiele4921 16 дней назад

Another great ' how to' video, my only issue was those bath support legs, I thought they were just a tad to awkward to get to on the wall side of the bath, but otherwise a grest video, bedt regards from a Kiwi living in Australia, Les

@Codebreaker4981 16 дней назад

Fantastic 👍👍👍

@TheDIYGuy1 16 дней назад

Thank you! Cheers!

@MHYH15 3 дня назад

Very detailed and informative videos you have in your channel. I was just wondering how you can replace the tap once it needs to be replaced?

@michaelplays2449 16 дней назад

Great video !!1 thanks

@TheDIYGuy1 16 дней назад

Glad you liked it!

@yamyamtree998 10 дней назад

👍👍 These videos are the most useful thing ever. Thanks for posting them it really helped. Regarding the boarding wall, what kind of such material and where can I buy. Thanks

@Mike_5 15 дней назад

Brilliant as a lot of people are scared of plumbing and generally of Plumbers as most of them insist on driving their VW vans onto your nicely trimmed lawns

@Pete.Ty1 16 дней назад

👍👍👍. Thank you

@TheDIYGuy1 16 дней назад

Thank you too

@snappyfish 8 дней назад

Many plumbers say no taps as back of bath where they are not accessed very well. What's you thoughts on this and reason you went for taps on back? Amazing channel. Thanks

@JaaacKz 13 дней назад

good luck getting them taps out in the future

@gasnewbie1941 16 дней назад

Loved the video and got some useful tips from the comments too. What shower broads did you use? Loved to have seen you do that too.

@TheDIYGuy1 16 дней назад

Glad it was helpful. Check out the underfloor heating and wall boards video I posted last week 👍

@darrenmackenzie1892 15 дней назад

How will you future proof the bath taps if they need to be replaced? Cheers

@Snip59 8 дней назад

Replace a subfloor which is best to use Yellow Tongue or OSB or Scyon Secura for Bathroom Floor cheers.

@fazer12779 16 дней назад

Your bath will sink slightly when it's full of water, so you should fill up the bath before sealing to replicate this. If you start sealing with an empty bath, the sealant could crack as it expands when you first use it.

@TheDIYGuy1 16 дней назад

Yep as shown in the video.

@izzy1997-love 16 дней назад

Hi Mate, could you do a video about changing your bath to a shower cubicle

@TheDIYGuy1 16 дней назад

In future I could do 👍

@markshellard5894 16 дней назад

I remember having a cast iron bath as a kid 😂

@dougaldouglas8842 16 дней назад

In front of the fire

@carlhank65 16 дней назад

@dougaldouglas8842 no that was a tin bath,I also had that😂

@dougaldouglas8842 5 дней назад

@@carlhank65 Nice oval tin bath before the fire. Enamel sink before that, and dolly tub for washing

@theoldhobbit3640 15 дней назад

I'm about to take my bath out because of those stupid center taps. Whoever fitted our bath did not secure the locking nut properly so the taps now move at one end. To tighten the nut, I have to take the bath out, so putting a traditional end tap version back in. Great video and thank you for sharing 👌👌

@Showing_the_car_ 5 дней назад

I think you can get a specially designed spanner to reach up and tighten the nuts...

@naebadyersel 16 дней назад

see when you sciliconed the bath, you had the bath full of water, is that so theres weight down for sciliconing or is it to check for leaks at the same time?

@Showing_the_car_ 5 дней назад

it's to get the right height for the bath before the silicon sets. Probably not too important in this case with his massive beams holding the bath up 😁.

@theoisaac9948 16 дней назад

👍 👍

@TheDIYGuy1 16 дней назад

Cheers 👍

@georgeanastasi7729 15 дней назад

Is there any harm in using a bit of sealant when fitting the waste? Had a nightmare in a previous property with a leaking waste and I did this in the end to stop it, but is it a bad idea?

@tuffbadger7342 16 дней назад

Thank you my missus wants the basin on the other side my baths a whirlpool need to track all pipes and wires plus she bought water fall taps no bath drilling for me

@BobbysGunChannel 11 дней назад

Good effort lad! Is that a Norfolk accent I detect?? Do you do new customer work atall?

@lukesadventures7192 16 дней назад

Great video as always. I’m doing this myself at the moment, just wondering because you have shower boarded onto the bath did you have to cut the bath front panel down in length? Or did you fit the panel and board to the front of it? Thanks

@TheDIYGuy1 16 дней назад

Thanks. Correct, I had to trim a bit off the bath panel 😊

@lukesadventures7192 15 дней назад

@@TheDIYGuy1 nice one!

@plumberdan5720 16 дней назад

Good video, are you close to Norwich?

@TheDIYGuy1 16 дней назад

Yep 👍

@scottt988 16 дней назад

I am from the USA. We never see that style of tub ( the bump out in the front) Whould love to see a video on why this is a good design. I think it is for the shower part but not sure.

@JP_TaVeryMuch 16 дней назад

Sure is.

@Pete.Ty1 16 дней назад

You are correct, it gives you a wider area should you wish to fit a shower over the bath. 👍👍👍

@johnadams1976 16 дней назад

I installed one of those baths with taps on the side in my old house.... Looked amazing.... Until the flexible tap pipes perished..... Oh dear dear dear.... NEVER again will I ever use those flexible hoses! If I wanted them on the side, I'd sooner put pipes into the wall and then mount a funky tap to the wall, pouring into the bath. Hope yours are better quality than the ones I had!!

@TheDIYGuy1 16 дней назад

Ah no way! I always use the JG ones so they are a decent brand. So far on the ones I’ve done I’ve not had issues 🤞

@pavelrevin2145 15 дней назад

🎯 Key points for quick navigation: 00:00 *🛁 Bath Preparation* - Preparing the bath for installation, - Installing support bars and feet for the bath, - Fitting the click clack waste and connecting the overflow and plug. 05:42 *🚿 Bath Tap Installation* - Measuring and marking the positions for the tap installation, - Drilling holes for the taps and using a hole saw for the installation, - Finalizing the tap installation with nuts and seals. 07:36 *📏 Setting Bath Height* - Adjusting the bath height using clips and screws, - Determining the batten height on the walls, - Attaching the bath to the walls with proper support and leveling. Made with HARPA AI

@tirvplumbing 16 дней назад

Personally if you want the taps there I'd have advised wall mounted taps. They're going to be a nightmare to get off if you ever wamt to change them. Agree with others sit the feet on a timber strap if you have floorboards. I'd sling a couple of rubber line clips on that waste run too. It can go soft with hot water and sag over time. But good job overall😊

@TheDIYGuy1 16 дней назад

The taps look good but they aren’t ideal if I had to work on them. I think I’d just bang a hole through from the room behind 😂

@tirvplumbing 16 дней назад

@@TheDIYGuy1 yh access hatch is the get out of jail card if its an internal wall.

@amazing451 16 дней назад

Am I right in saying that you will not have to do any supplementary bonding to the bath as it is a composite bath? I would like to see a video about the subject of bonding in bathrooms and kitchens if you could do one please. 👍👍

@TheDIYGuy1 16 дней назад

Correct 👍. Let me see what we can do in future

@amazing451 16 дней назад

Thanks even just a guide on the subject would be a help to ensure that bonding that I have now is sufficient.@@TheDIYGuy1

@ibrahimk2343 16 дней назад

Hii You have near enough the same setup as me and I am experiencing a massive problem.. the seals for my bath taps have perished and I need to replace my taps... A few plumbers are saying that I must replace my whole bathtub Do you have any ideas I can explore as I don't really want to be installing a brand new tub Thanks in advance

@tirvplumbing 16 дней назад

You could try the nerrad tapex kit to get up there with a camera or a mirror but it's a nightmare job. If its on an internal wall cut a hatch from the next room. I always recommend wall mounted taps for these scenarios for this reason. Good luck.

@ibrahimk2343 15 дней назад

Thanks for the reply - good idea will try get something like that and have a go first - but Yh lesson learnt for us - 20p washer has turned into a nightmare 😂

@fozzy2209 15 дней назад

Are the taps central? The bath was 1690, half was 845 but you measured 850, or have i missed something?

@naebadyersel 16 дней назад

can you do a video on how to install an electric gate?

@TheDIYGuy1 16 дней назад

Thanks for the suggestion

@naebadyersel 16 дней назад

@@TheDIYGuy1 sliging ones if you can that would be amazing!

@njuham 16 дней назад

Say for some reason you need to change the taps, perhaps they leak or lose the chrome finish, you're stuffed aren't you?

@bscott77 16 дней назад

Yes, had the exact scenario in a property and had to take the whole bath out and replace that too 😮

@DrunkenKnight71 16 дней назад

agreed, unless there's an access panel in the adjacent room, the only option is removing the bath

@TheDIYGuy1 16 дней назад

Yeah the side taps aren’t the most convenient things, but I go with a good quality brand and fit them well in the hope that minimal maintenance is necessary. A lot of these modern designs aren’t done with maintenance in mind 😂

@lllANIMALlll 16 дней назад

@@TheDIYGuy1But what about when Mrs DIY Guy wants different taps ? 😂😂😂

@w.o.o.d.y 16 дней назад

@@DrunkenKnight71 I cut away the wall from a bedroom next door to access someones taps and plumbing in a bathroom not dissimilar to this one. Luckily it was only plasterboard, not brick, but it was definitely the lesser evil to deal with, and didn't disturb anything in the bathroom. I normally use lever isolation valves instead of ballofix as they can tighten up with time.

@tomclarke1768 9 дней назад

Made easy. 🤣 There's no such thing as made easy.😋😋😋😋😋

@louiskingston7462 16 дней назад

I always thought you were meant to fill the bath with water before you do any silicone

@TheDIYGuy1 16 дней назад

I did as you can see in the video. However…. Not always required if it’s battened properly

@louiskingston7462 16 дней назад

@@TheDIYGuy1 my bad i commented prematurely 😅

@TheDIYGuy1 16 дней назад

👍😆

@jablot5054 7 дней назад

Strange place to put taps? If thats what the customer wants.

@mattparker7068 16 дней назад

Why didn't use concrete screws apposed to the screw and plug technique?

@TheDIYGuy1 16 дней назад

Screw and plug is plenty good enough for this. Fitted many many baths and no issues 👍

@skumpuntele8941 16 дней назад

Why are Brits not using waterproofing, especially in first floor bathrooms?

@johnadams1976 16 дней назад

Because it's installed properly and isn't going to leak!! Waterproofing isn't going to stop a leak really!! It'll run under your door and down the stairs instead!!

@JP_TaVeryMuch 16 дней назад

There's a little rhyme the more sanctimonious of people teach their children and it goes like this: Please remember, Don't forget, _Never_ leave the bathroom wet!

@skumpuntele8941 16 дней назад

@@JP_TaVeryMuch of course. Because accidents never happen and leaks are a myth

@JP_TaVeryMuch 14 дней назад

@@skumpuntele8941 Yeah yeah yeah !!! Going on how fastidious our host is with his warnings and tricks of the trade gained from years of experience, plus I think that he covered waterproofing the floor in the recent video on how to tile a bathroom floor, there's no need to be concerned. As an aside, thank you from this englishman for using our system of naming each storey in a building. Lots of unnecessary confusion arises from our Ground and your lack of it in the USA.

@bobby5634 16 дней назад

Never fit bath taps like this with no access🤦‍♂️

@sergejsergej2728 9 дней назад

it will be impossible to replace such a faucet without dismantling the bathtub itself, or making a hole with a hatch on the opposite wall from the faucet