How to Install a Compacted Under-seat Subwoofer 

Yess..it is easy to install..here I am removing the seat in order to done it preciously. If not this can be done very easily as you explained..thank yoi

I was bout to say the same thing

Yest, it is very easy to install. As i am doing a demo video i remove all the things and clearly show the way of installing. Thank you..

This is MBQ 10 inch sub. Sure. Hope to add the voice in future videos. If any clarrification needs regarding this video, feel free to ask. Will help you in our best level.

Around 20USD

Normally it is recomended to fix it to a flat wooden board and put it on the floorboard. But here as the subwoofer covers its entire body with a plastic cover, no short circuits will happen. But for higher bass sound, without a proper fixing, the sound may not as expexted.

Nothing wrong in the installation But you have to changed the settings fir the subwoofer from your sound settings in thr head unit. Please find the following video to see how I changed settings for my installation. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DGNnWduD08A.html

If you are connecting rca, then no need of connecting speaker lines. But you need to connect p-connect(a ignition +12v) to the subwoofer in order to switch on the inbuilt amplifier. Is it working without connecting p connect??

thanks, it helps he alot.

Any time 💪💪

We have used to lay our wiring right top of the original wiring harness which may not contact any metal part of engine block. But as you said, there is a possibility of melting of degrading the insulation of the wire as we are not covering it a extra insulation cover. Next time, we will concern about it and thank you for your great advice. Appreciate it very much.

My one is also same..I think that this is fabricated with a pre-amp which has not much power..it only plays the limited frequencies and changes may also be limited. If this is installed via a seprate amplifier, these changes may come to action. My one is also same..no difference at all.thank you

If you have seperate out for subwoofer or audio out in your stock head unit, then it can be installed . Otherwise, you can use your speaker out from head unit to feed the subwoofer also. So this can be installed to a car via nominal speaker out

Normally, every player do not equipied with subwoofer RCA outs. Then we have to give the signal for the subwoofer via speaker out lines. In this video, 2.50-3.20 we show the installation manual. As we have RCA out, we have chosen the RCA method. But if you want to install it using speaker out, the third method can be used. We will upload a close up of wiring diagram for you of the above installation, cheers

Its is better via RCA low level output as the subwoofer plays low frequencies.

rca and high level input is the same thing. both send out audio signal. I dont think there's a difference

Yes. Both delivers audio signal, But factory stereo systems connected with high-level inputs will not sound as good as low-level inputs. If your using an aftermarket stereo, there won’t be much of a difference between high-level or low-level inputs on basic systems. If you’re going higher end we are recommending to use low-level inputs. Thank You

These type of subwoofers are called active subwoofers which means they already have in-built amplifier on them. seperate amplifier is no needed. If your car headunit already has a subwoofer out, then you can surely use it for this type of subwoofer installation. Wish you all the best for your installation.

@@the_garage thank you so much!,another question is...my player only have one subwoofer output, how can i installing another subwoofer if i wanted soon?

Then it is better to install via seperate amplifier ( 2 or 4 channel) . Then you can plug 2 subs simultaneously.

You have to connect power cables and p-connect in order to power up the sub. The sound signal will come through the RCA output from the unit to the sub. No additional wiring needed.

@@the_garage ok thank you

Abhishek Singh welcome 🙏

does it get hot after playing around 20mins??

Which model u have ??

It has a good sound quality. No noise. Clear low frequrncy sound. Good base which suit to a interior of a car cabin. Though it is not sound as large subwoofers which run with seperate amplifiers, this is a good product to use which will satisfy your requirements. Can be recomended.

@@the_garage deep base with less dum dum?

Yess..the sound is much better. Clear.no noice at all..decent sound and base.

Make the sterio base to flat. Then change the base level from subwoofer controllers. This might works well. Thank you

@@the_garage iv trued this but if I have midds or any additional speakers that are not tweeters, they will sound flat

Then how about change the settings of the sterio to play the mid frequrncies and for the subwoofer settings, set the low frequencies and crossover to the lower margin of the subwoofer

@@the_garage brilliant I’ll try that thanks

Hope yoi will figure it out well. Good luck

Agreed, we are recomending to connect this subwoofer to a wodden plate and fix it to the vehicle. What is your opinion?

@@the_garage Wooden plate that is bolted to the vehicle will work. Velcro or just loose under the seat are the most common mistakes, even the manual has it wrong on many of these.

Thank you for your valuable comments

This produces a genuine bass sound without a noise. It is suitable for a indoor surround like a car cabin etc. can be recommended.

ඔබගේ සහයෝගයට බොහොමයක් ස්තුතියි.ජයවේවා

Sure. Will upload soon.

@@the_garage Thank you

@@KVI580 having some copyright issue. But will upload after fixing the problems

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DGNnWduD08A.html

@@the_garage price???

Sorry, We did not get you sir???please breaf your question. Thank you

I was asking if you can explain the way to put two underseat woofers together

It is better to use a 2channel amplifier rather using two subwoofers connect to the system at once using audio outs from headunit. Use RCA to input the signal to amplifier and then use two outs from amplifier to give the signals to subwoofers. But careful about the power supplied to the system as this may drain your batteries quickly.

Sinyal audio akan datang melalui kabel RCA. Kabel biru / putih harus terhubung ke + 12v untuk menyalakan amplifier yang terpasang. Salam bro

@@the_garage ok bos bnda dh cnfom ada msalh dh cll seller dia akn gnti lain wrnty 2thn..ptutlh psng2 xda bnyi wofer yg brmsalh..

@@hamidrahman3021 Itu berarti Anda tidak memiliki input RCA ?? Kemudian gunakan input tingkat tinggi melalui dua speaker belakang

@@the_garage smua sudah dicuba...remote rosak

@@hamidrahman3021 menyesal mendengarnya, tidakkah Anda memiliki tombol untuk penyetelan manua

Sure...if you increase the bass, then you can feel it through your seat...😁😁

පුලුවන්..එතකොට sub එකට input signal එක දෙන්න ඕන speaker වලට යන line එකෙන්.එකට වෙනම WIRE දෙකක් තියනව..sound වල වෙනසක් නැ

Normally audio setup has two power inputs, one of +12v battery input and +12v ignition input. Yeh this +12v ignition power input can be used for the +12v remote wire power for the subwoofer. Firther it needs a +12v battrry power also. But be careful when you are using +12v ignition power, it needs to be a power source which not engaged in the engine main power. Otherwise you will experience a engine noise from your audio setup

Thats because the settings of subwoofer is not matching with the headunit settings.try to change the settings in headunit as per the settings of subwoofer. Flat the bass trebble in the headunit equilizer.

Yes. This is the 10inch model, MBQ Aw-10e

Yes.this can be placed either under the driving seat, passenger seat or back in the boot. For foxbody mustang, it is recomended to use under the driving or passenger seat

zaroor, mere agale veediyo mein aavaaz jodane kee koshish karoonga. aapakee tarah kee salaah ke lie dhanyavaad.

Is your sub has a fuse in its body near the power connection socket as this subwoofer. Then you need no fuse between the battery and your sub. If not it is recomended and much safe to add a after market fuse to this main power line to protect your subwoofer from power surcharge. If the line get high load, higher ampier, then the fuse burn out and protect the subwoofer..nominal ampier for the underseat subwoofer is 30amp.

Okay , because i dont have the fuse with the kit and on the video i didn't see a fuse on the yellow line. So i have to buy an aftermarket fuse.

The subwoofer is the : blaupunkt thb-210a.... do i need a fuse?

@@snowdoglover8204 you have got a fuse (yellow colour) in your subwoofer compartment. So no need extra fuse. Just directly connect the yellow wire to the positive terminal of the battery. +12v

Did you put all the wires on one side or sepperated? Ground , power and rca?

sorry, did not get you? not familiar to your language

Yesss

@@the_garage contact number eka denna puluwanda?

0712751335

Normally factory fitted headunits are not equiped with RCA outs. If you are using aftermarket headunit , be sure to purchase a one with RCA out and then you can surely done this modofication to the Celerio also

@@the_garage thnks for the reply..I am looking for RD brand under seat subwoofer for celerio. RCA output is must for better bass quality right?

It is much better if you can use RCA output as it already devides the low freaquancies for the subwoofer. Other wise if you are going to feed the sub from a normal speaker out, then unwanted noize can be damaged to your sound quality . So we are recomending to use a seperate RCA out for the sub for better performance. Thank you

@@the_garage Thanks a lot

@@TheUnOriginalsAdda wish you all the best for your modification

It is p-connect wire. You may connect this to the +12v power antenna out from your headunit. Actually this is the power on for the inbuilt amplifier in active subwoofer. If you want to power on it automatically when on the headunit you can connect as above. Otherwise you can use any +12v ACC with a on/off switch in order to on and off the subwoofer as you wish. Simply it is a+12v ignition power input. Hope you got the point 🤔🤔🤔

Yesss

Woohoo! My second favourite cricket team 😁 🇱🇰

All the units are not equipied with the sub out / RCA out. Most Factory fitted players are with out this option. So it is better to go for a after market player or you can choose another wiring system to input the sound signal to the subwoofer. In this video we are showing the wiring for low level RCA input method. We will upload a photo for another wiring systems for your easy reference. Regards

Please provide us your email address enabling us to forward the wiring diagram. Regards

It is not connected to the floor board of the car. I have fixed it to the original carpet which comes over the floor board. It is recommended if you can fix it to a wooden board.

With pleasure. We will send you the specific wiring diagram available in the manual. Please provide the mail address

@@the_garage taylorhendersonsuarez@gmail.com will wait thanks

We will send it ASAP

Sir, we have follow the instruction in the manual for installing this subwoofer, in order to be precious, the seat also removed and place the subwoofer correctly, the point which we did not get is what were the errors that we made when installing the subwoofer as you mentioned. It will help us to improve our work. Regards

we have clearly shown each step for installing the underseat subwoofer. Due to a technical issue, we can not use voice for our videos and in future we will surely add voice also. I am really sorry if you did not get any from this video and hope to help if you need some clarifications please

@@the_garage one will g o to battery one will in music system is tht enough?? And it will only work when we on music system not drain the battery like bas tubes ?

Here, the subwoofer is on when the ignition is on..if you are not in ignition on position, no any power is utilized. The battery power is only for the memory which is not draining your power. It is negligible. Actually these subwoofers are active subwoofers and it comes with a in built amp. So not much power is required. Just plug your wires as per the video.cheers