No video :(

How to Install a Dimmer Switch - Single Pole or 3 Way

Подписаться 29 тыс.

Просмотров 150 тыс.

50% 1

Today, I will be showing you guys how to install a new dimmer switch for a single-pole configuration or a 3-way configuration. I’ll be using the Lutron AYCL-153P-WH dimmer switch. This switch comes with a wire nut included in the box so all you need for this project is a screwdriver and a noncontact voltage tester/multimeter. This DIY project only took me about 10 minutes to complete! Good luck! You'll nail it!
Hey guys my name is Blake also known as Nailed it here on RU-vid and I make videos about DIY projects. I hope you guys enjoy the video and let me know if you have any questions about it in the comments and I will do my best to answer them. I hope you learned something today and saved some money in the meantime. Also, don't forget to nail that like button for the RU-vid algorithm! ;)
This is a new channel but more content will be coming soon! If you have any video suggestions please leave them in the comments!
TOOLS
Budget Non-Contact Voltage Tester: amzn.to/316TQEm
My Non-Contact Voltage Tester: amzn.to/3crw5gF
Best Screwdriver: amzn.to/2Pdb54v
Wire Strippers (If you need them): amzn.to/3ccYbMw
Knife: amzn.to/3th4CEa
Mini Screwdriver set: amzn.to/3ssY0m3
SUPPLIES
Toggle Dimmer switch: amzn.to/3d9dB3x
Decora/Rocker Style Switch: amzn.to/3stcL8f
All Dimmer Switches: amzn.to/3d9dGnR
TIME STAMPS
0:00 Intro
0:22 Tools
0:27 Prep & Overview
1:05 Removal & Overview
2:04 Wiring Instructions
2:27 Wiring & Installation
3:37 Test & Outro
SUPPORT THE CHANNEL
/ nailedityt
OTHER STUFF
#diyprojects #nailedit #howto
Additional sound effects from www.zapsplat.com

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@tedswan7691 8 месяцев назад

Best dimmer switch video on the web! Only person that mentions “don’t worry about what side you put the black wires on” thank you for the video

@wallerlandventures 2 года назад

This is the best, most straight forward video on single vs 3 pole dimmer switch installation I have found so far and I've spent a good hour looking for one that explained everything even the bending of the wall plate. Thank you!

@Nailedityt 2 года назад

Wow thank you! I’m glad it helped! Thanks for watching!

@shimasalehi1007 2 года назад

@@Nailedityt wi soownwiiioiooubs

@shimasalehi1007 2 года назад

I’m wee whihehoesiei

@kenn1936 2 года назад

WOW - that is so simple, you show everything without adding lots of complicated information. Awesome job!!

@reggieholguin7907 Год назад

I've seen dozens of these diy simple electoral how t vids, but none of them explained "single pole n 3 way. Thank you 😊

@golpher12 2 года назад

Really thorough yet to the point! Definitely nailed it!

@Ahjanea 9 месяцев назад

Great video, straight to the point, not too wordy and no complicated explanation.

@charlestona3865 18 дней назад

Easy to follow video which is great. I wanted the full explanation though 😢

@jamesh5460 2 года назад

Best how to vid for this switch I have found. Awesome

@Nailedityt 2 года назад

Wow, thanks!

@julierenee7 20 дней назад

Thank you for making this simple and well informed video for us. Going to try and do this myself with the help of your video!

@HoangNguyen-gm5vo 10 месяцев назад

Simple and clear lesson.Well done 👍 Thank you!

@runeass Год назад

Wow thank you, I need this explanation to get started on my 3 way dimmer switch.

@TheVintageGamer 3 года назад

Hey I have no idea why the views are so low on this video... its GREAT. A lot of videos for this process have thousands of views and it's super hard to see where they're putting the wires (and the colors are all over the place). Hopefully you keep this up the pictures we're a DIY savior here. And the detailed explanations really helped

@Nailedityt 3 года назад

Wow thank you for your comment! I really really appreciate that! I’m glad the video helped explain the process!

@TheVintageGamer 3 года назад

@@Nailedityt I'm looking at the light right now! Worked great

@pillowfighter86 2 года назад

What is the blue thing on the front of switch do?

@adrianbrisslar 4 месяца назад

I did it yesterday, without not seeing any video, anyway, good video

@Nailedityt 3 месяца назад

Nice work!

@theresakeating9324 2 года назад

Thank you for your instruction was awesome. Once we saw your video it only took 5 minutes to put together. The instruction and the video that came with the product was a joke could not understand what they were saying and was skipping steps. Lutron should use your video for the video for there company.

@GotGracexxxxx 3 месяца назад

You can adjust the range of the dimmer with that blue dial under the switch cover. No need to cut power, since you will stay outside of where the wires are.

@FlashRvz 10 месяцев назад

Question! I don’t have a red wire on one of my switches PORT when I remove it from one side. Does the dimmer go on that one or is that for the ON/OFF switch?

@mwalsh5757 5 месяцев назад

Three-way Leviton 6674-P0W install checking in. If you’re certain of your wiring but your switch works backwards, you most likely need to swap your traveler wires over.

@G-Arias Год назад

DON'T use the quick connect holes!! Always use the screws for a more secure connection :)

@CraftyInes 3 месяца назад

I have two black wires, a red and the copper. Following your video for single pole and connecting the two black wires, what do I do with the red wire?

@reggieholguin7907 Год назад

Great presentation

@ernie1956 7 месяцев назад

Set of led light were ocassionally flickering. I was told it might be the switch. When I started to pull the old switch it had never been grounded. I grounded it and reinstalled it. No flickering so far. Do you think this may have solved my problem. Flickering would come and go so I don’t know for sure yet.

@nomadryder4377 Год назад

What if you only have white, black and ground. How do you hook that up?

@Nailedityt Год назад

The white will stay with the other whites, the ground will connect to the switch and you should have two blacks. They both should go to the switch! Check out this diagram! images.app.goo.gl/Y4HFwEnKTKQXcVKt7

@kristarindlisbacher2219 3 года назад

Thank you 👌🏻 great video

@Nailedityt 3 года назад

Thank you!!

@FernandoRodriguez-ds5ri 2 года назад

Quick question! Can you use a 3 way dimmer switch to replace a single pole light switch? What to do with the extra red wire?

@Nailedityt 2 года назад

Yes you should be able too, I’ve never done it before but I don’t see a problem with it. You would just put a wire nut on the unused wire! Hope that helps!

@caffeineman72 2 года назад

So, I have two red wires, and two white wires and no indication which one is the common wire - house was built in 1994. Any tips on wiring this?

@FernandoRodriguez-ds5ri 2 года назад

Might want to use a different dimmer switch with less wires.

@arcticrefrigeration1925 Год назад

My 3-way switch has black, blue, and white wire. It woulld be better to explain what the wires are for (incoming power, switch interconnection, and lamp) rather than just colors.

@jeffw1362 2 года назад

I've purchased a new Lutron Diva 8-Amp 0 to 10-Volt 3-Way/Single-Pole Dimmer - and plan to run 5 LED fixtures, operated from a single light switch. The dimmer switch itself has 5 wires (wht/blk/green - self explanitory) and also 2 small wires which I assume are low voltage for dimming. The home has standard 14-2 Romex wiring to the switch box. Not sure what to do with the 2 small wires.

@venomg5799 7 месяцев назад

What if i have one black wire & one white wire?

@jamesdodds3195 Год назад

Can this dimmer be used in line on something like a lava lamp?

@rwalden87 2 года назад

Thanks!!

@DudeSawdust 3 года назад

Now I know! Great tutorial. Well delivered. BTW, what program do you use for all those graphics?

@Nailedityt 3 года назад

Thanks! I use Canva for most of my graphics!

@DudeSawdust 3 года назад

@@Nailedityt I use canva for thumbnails but I didn’t know it could do graphics in my videos. I’ll have to dig deeper and learn how to do it. Thanks!

@Nailedityt 3 года назад

Yeah you can make just about any type of drawing you want. Then I just move it around with my editing software! For example my breaker panel was made using canva!

@DudeSawdust 3 года назад

@@Nailedityt Very Cool. I'm going to use it in the future, I watched a tutorial on RU-vid, definitely going to look into it more

@Nailedityt 3 года назад

Yeah do it! If you have any questions about it let me know!

@Nate-Dawwg 2 года назад

Great video. I have a complicated situation. Im trying to install a dimmer switch. But there is no ground wire im the junction box. What do I do? And also the switch im replacing has another switch right next to it but the black wire is connected to both switches! Idk what to do?

@Nailedityt 2 года назад

The ground wire is not necessary! A lot of older houses usually don’t have a ground! All it does is make the circuit safer so if you can add it great but if not it will still work just fine! The black wire is the “hot” wire. In order to switch the light on and off, you’ll need to “ interrupt” the circuit with the switch! That’s why it is most likely connected to both back wires! Is the second switch working still? If it’s working it should be fine and you won’t need to replace it? Let me know! I’ll try to help the best I can!

@mplscarsales6652 2 года назад

Not understanding isn’t single pole wiring usually a 14/2 3 wires total including ground usually black white and Copper ?

@Nailedityt 2 года назад

Single pole means you can only turn on/off the light from one location in the room. 3 way means you can turn on/off the light from multiple locations meaning you have more than one switch that turns on and off the same light! Hope that helps!

@jdmoney78 2 года назад

I still have 0 idea how to put 12 gage wiring to this. The wire is to fat to loop around the screw. On top of thr holes are way to small. Does this switch work with 12/3 wiring?

@Nailedityt Год назад

It should!

@Nailedityt Год назад

If not, you could get a small connector that reduces the size

@jdmoney78 Год назад

Thankyou I was finally able to figure it out! Took some finesse lol. The screw which the red wire goes to. Is so close to the side it was hard to loop around it.