How to install a Fish Finder onto a SIB - Honwave t32 - Garmin Striker Plus 4 - SIB Fishing UK 

Well done buddy. This is one of the easiest and cheapest ways of getting it done. I will also add I love the fact that you have come up with a way of mounting in solidly but easy to detach so I can then roll the boat up with no probs. Very smart. I was thinking of doing something with pvc pipe ove the pontoon but the luggage strap is far easier and more solid. Cheers big ears.

hi Adam you good put that lead though that o ring on back off the boat to tidy it up a pit 👍

hope it works well for you. i guess you need to remember its on the bottom when coming in to the beach

I did this. It worked. Rather than one of those plastic clip luggage strap, I used cam buckle strap, seemed like the safer option. I put bits of rubber between transducer and tube as well as between cam buckle and tube. Used a plastic food tub for the battery just like this, padding it out inside with stiff foam to hold the battery tight. I screwed the Garmin mount into the tub lid and then strapped the battery tub onto the boat's bench, with a piece of rubber mat beneath it to hold it in place. I also put another strap around the box and mount in the other direction for insurance on the mount. I didn't get any image when moving at speed, were it mounted on the transom more towards the keel I suspect I'd have better chance of that. But you're typically not looking for fish at high throttle, right? I did all this, and through no fault of the unit, I STILL DIDN'T CATCH ANY FISH YESTERDAY arrrgh. It's not a magic box that will get you fish. It just tells you that fish are "around", because they are already gone from the spot you see them at. Marking a waypoint and trying (difficult) to head back to it does not do it. Also - 7ah battery didn't last nearly as much as I'd hoped - power the unit down and do periodic checks or processes rather than just leaving it on.

Can you tell me how the strapping of the tranduser worked out attached to the tubes. I want to do the same. Thank you

Hello mate, a rubber grommet will seal the hole in your battery box. Also, are you going to cut the bolts down that are securing your wheel mounts? It looks like a scraped leg waiting to happen. You could cut them down and use acorn nuts to give the bolts a nice rounded edge. A Dremel with a cutting disc will make light work of those bolts, just don’t slip and cut through a tube or the floor 😂

Do you still use this method for attaching the transducer? Do you get any interference placing it there. I've just got a t27 and was looking for ideas 👍

Thanks so much, just bought a Striker 4 and the last thing I wanted to do was drill holes in my new Honwave!! Can you tell/show how you connected the leads to the battery?

Hi mate, greetings from Spain. I'm thinking of buying the honwave t32 ie3, could you tell me how yours turned out? I can't find much information on the internet about this boat. thank you very much friend.

What seat bag have you got? Looks good. Is it waterproof, water resistant, or just gets wet?

Awsome what length are the straps please?

Hi. Can you post the link for the wheels plz? Cant figure out the name for that. ty adv

A tip for tightening the strap. Fill tube 99% put the strap on tight then fill last 1%

Can you post link with this seat cushion with pocket , please. Thanks.

Hi would you say these wheels are better than the honwave ones?

great video! i was wondering what kind of dolly you use to transport the tender from the car to the water?

Do ur wheel rub on the rubber on the bk of boat

Well as a fisherman do like the old days just go fish tho because when you see that big ass dot on there it’s a sharks amd if he bites that dingy all bad tho 😂😂