How to Install a Frost-Proof Faucet with PEX Piping | This Old House

Подписаться 2,1 млн

Просмотров 651 тыс.

50% 1

This Old House plumbing and heating expert Richard Trethewey shows how to plumb a new hose faucet using flexible plastic water pipe. (See below for a shopping list and tools.)
SUBSCRIBE to This Old House: bit.ly/Subscrib...
Shopping List For Installing a Frost-Proof Faucet with PEX Piping:
- frost-proof sill cock
- PEX piping and assorted fittings
- teflon tape
- silicone sealant
- 1 5/8-inch stainless screws
- copper pipe and assorted fittings
- lead-free solder and flux
- 1-inch PEX clips
Tools For Installing a Frost-Proof Faucet with PEX Piping:
- drill/driver fitted with 1-inch bit
- pliers
- PEX cutter
- PEX expansion tool, used to connect fittings to PEX piping
- caulk gun
- propane torch
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WETA Washington, DC.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldH...
Twitter: bit.ly/ThisOldH...
bit.ly/AskTOHTw...
Pinterest: bit.ly/ThisOldH...
Instagram: bit.ly/ThisOldH...
bit.ly/AskTOHIG
Tumblr: bit.ly/ThisOldH...
For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldH...
How to Install a Frost-Proof Faucet with PEX Piping | This Old House
/ thisoldhouse

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 272

@mitchjohnson4714 3 года назад

"PEX does not like to be soldered." I learned something new today. 🤣

@galehess6676 2 года назад

it keeps running away when i try it

@mitchjohnson4714 2 года назад

@@galehess6676 You need more flux.

@3rdmin1st3r 5 месяцев назад

True genius

@FredD63 2 года назад

I would have used a ball shut off inside and blue pex angle the sillcock downward and foamed the hole not siliconed just the top of the hole … Foam all exterior extrusions to keep air and pest out

@flintsmith4771 3 месяца назад

Blue PEX because it's cold water. Red means "hot". To keep water out of the wall do these: 1) Angle the outside pipe downward to direct rain water away from the wall 2) Silicone the actual fitting-to-wall surface 3) Foam the hole Where would you add a ball valve? Just inside the wall? Something other than the one near where they soldered? Why? Two valves? Thanks for your help. I know it's been 2 years.

@ditachan 10 часов назад

@@flintsmith4771 Inside wall or you can have one near where all the pipes converge. Having a separate shut off valve for the hose bib helps when someone needs to service it in the future. Also nice to shutoff so it doesn't get accidentally turned on when temps start to dip down to freezing.

@davidcrawford6505 9 лет назад

I would have placed the sillcock further away from the window if possible. Just in case it leaks at the hose connection and puddles right neck to the window.

@bdee1840 8 лет назад

great point!

@PDXcitable 5 лет назад

Yeah, asking a lot of a foundation when you regularly flood it. As long as you're talking about doing it right, I would put a well on any window that close to grade, would slope the soil next to the house so it flows away from the house, and would put a splash block under the sillcock/faucet/hose bibb instead of saturating the soil at my foundation.

@kalijasin 4 года назад

Perfect application for Pex.

@stinkycheese804 4 года назад

Idiotic application for pex when it was a standard plumbing setup using a faucet meant for copper pipe and connecting inside to copper pipe anyway, and needing the expensive tool, and all in all, a senseless way to do it.

@RicardoJunqueira 10 лет назад

I'm not a constructor, not even a HOME owner, but I'm dying to work with some pex tubbing.

@forrestyoung6588 6 лет назад

Leif Harmsen ive been looking for a new pair of pex bondage cuffs for my sexual adventures

@FlightSergeantRose 6 лет назад

Keep in mind that your pressure will drop a bit if going from copper to PEX.

@FlightSergeantRose 6 лет назад

We're going to have to agree to disagree Steven. I changed out my 1/2" copper system to 1/2" PEX with manifold and there was a noticeable drop in flow rate out of the taps in the house.

@FlightSergeantRose 6 лет назад

I'm glad to see you are capable of having a civil conversation.

@lucianonarno1408 5 лет назад

FlightSergeantRose I’ve done my fair bit of research into static and dynamic pressure in university and pressure won’t reduce or change at all because of the material of the tubes/pipes that carry water. As Steven said that’s controlled by the city.

@tb1109 Год назад

They make it look so EZ

@edwinbrian41 2 года назад

What’s the name of the tool you used to expand the end of the pex pipe?

@roberte.6892 Год назад

It's a pex expansion tool, but for the life of me I can't find one that has the 2nd part that allows you to attach the ring clamp.

@roberte.6892 Год назад

After more research, I think this is an old video maybe. He's expanding Pex-B and then adding a metal crimp ring which pex-b requires. If you use Pex-A, which is newer, the crimp rings are themselves a certain type of pex. You expand both the end of the pex-a PLUS the pex-a crimp ring and then just let them both relax back onto the fitting.

@billsmith9249 Год назад

@@roberte.6892that is a Rehau PEXa system.

@rufiorufioo 6 месяцев назад

Yeah it's Pex-B and I really do not see much of the Rauh system used anymore. You have the clamps or rings used now on Pex-b.

@techguy9023 4 месяца назад

Reminds me of compression vs crimp connectors for coax

@110texan5 3 года назад

Looks so easy with the proper tools ❤️👍🇺🇸

@ccdogpark 7 месяцев назад

Yeah sometimes I watch the show just to see the unusual tools they use.

@ericjane747 6 лет назад

That tool is a Sioux Chief F2080 combitool with Sioux Chief 2080 fittings. Most PEXa is F1960 and available by mail order from the supply houses. Big box sells F1807 crimp which is very similar to F2080 but less flow diameter and way cheaper. F1960 is larger flow but only one ridge in the fitting. Sex A is expansion do not use big box in store per for expansion. Only for crimping. Big box does offer online Pex a expansion and F1960 fittings but better off with supply house or pexuniverse for those. Richard used the 2080 tool in a later video at Home Depot which is deceiving since Home Depot does not sell any F2080 gear, nor do the online retail supply houses.

@rgeo27 6 лет назад

Please read correctly. 5th sentence should start as "Pex- A" (not= Sex A) is a expansion tube

@rebeccagleason2678 4 года назад

I looked up the Sioux Chief the one he uses to expand the pex I am looking into what the name of that tool is? I have see other's however not the one he uses has red handle and lime green button with the tightener on the bottom of the handle?

@billsmith9249 Год назад

@@rebeccagleason2678 that is a Rehau PEXa system.

@scgrindllc 11 месяцев назад

I can’t find anything like it :(

@cb5305 4 года назад

What is that tool your using to expand the pex

@Michael1M6 3 года назад

I’m curious isn’t there pex tubbing that’s blue for cold water and red for hot? With that being asked does it matter which u use if we’re ignoring the color?

@galehess6676 2 года назад

helps to see visually, if a line is one or the other, could run all red/ blue if you hate plumbers haha or don't want to buy two rolls if you only need a shorter amount

@jimmysapien9961 Год назад

Exactly/ blue - Cold 🥶 Red - Hot 😡 That’s How I would Do it & use Crimp Clamps !!!!!! Or Brass !!!

@leebannister3759 2 года назад

the shut off valve in the house, is that a secondary precaution if the outside valve's non-freeze tap does not work 100% in the winter?

@markh.6687 Год назад

You'd want to have a stop valve with drain on that outside water line, so in cold weather you turn off the water to the sill cock, then you open the drain to remove any leftover water. That way there's no water to freeze in the sill cock no matter what.

@puwazatza Год назад

this PEX connection reminds me how ancient that fitting style was..

@AlMai222 2 месяца назад

What’s that called? Looks solid. I definitely believe it’ll never come off

@TheSeanUhTron 10 лет назад

Shouldn't he be using blue PEX instead of red? (Blue for cold, red for hot)

@briandjordjevic9969 7 лет назад

Sean Place i mean it goes outside so you should know its cold water 😂😂

@SmoksmokVids 7 лет назад

Sean Place I

@Marcel_Germann 7 лет назад

The colour is only for convinience, here in Germany they're all white, no different colours. But I've noticed a big difference. Here you're getting a compound material with several layers. Inside is PE-X, then a bonding agent, a layer of aluminium again a bonding agent and then a layer of PE. In the video this is the PE-X tubing only.

@martin.klouse 7 лет назад

Cuz Germans know how to make things.

@Engineer9736 6 лет назад

Brian Djordjevic I hope you never become an electrician. “It goes to an unearthed powerpoint so you should know that that earth wire is used as live wire 😂😂”

@ccdogpark 7 месяцев назад

I'm going to add another outside water line in the front of the house when I find someone who can do the same caliber work. WRZ Delaware County, PA

@yukuhana Год назад

What is the make and model of the sillcock used in this video? Thanks in advance!

@falcongold2024 Год назад

this is a good video & under-rated. Thank you

@nonyafkinbznes1420 Год назад

Under-rated by whom? Where do I cast my rate vote?

@rebeccagleason2678 4 года назад

What was the name of the expandable tool used? I see it has red handles and lime green button. What is the cost?

@oregawn5099 4 года назад

Rebecca Gleason 1400

@billsmith9249 Год назад

that is a Rehau PEXa system. They're very 'cliquey' and won't sell to just anyone.

@nolangietzen4366 4 года назад

Is it common to use the red pex for outdoor faucets because I did the same thing

@mattsprayberry0 2 года назад

I love how he says wrenches but clearly those are channel lock pliers

@techguy9023 4 месяца назад

What about crimp pex rings? No shutoff?

@dwight.bennett 10 лет назад

This Old House Richard, In several videos, you have shown the instalation of Rehau PEXa, which has very nice fittings. Do you have any experience with Uponor (Wirsboro) fittings, or any issues with them? I am partial to PEXa expander style fittings as to avoid the smaller internal diameter crimp-on PEXb/PEXc style fittings which restrict water flow.

@appleztooranges 4 года назад

Would you recommend shark bite frost proof silcock? Seems easy to do and no soldering

@landrum3893 3 года назад

I don't trust shark bite for any permanent plumbing jobs. It's great for temp stuff or emergency repairs but they are just exposed single o-rings with mechanical teeth preventing slippage. They will fail before any properly installed fitting will fail and they are expensive as well. I would recommend Pex-a expansion fittings and Rehau fittings like what are in this video are very good. The tool is expensive though. Crimp or clamp would be my second recommendation but you do have to size up to keep the same flow. Best system for lowest cost would be pex-b clamp system with poly fittings. Cheapest pipe, cheapest fittings, cheapest tool, easy to do and reliable for permanent installations. You can even use the 90 degree hose benders too.

@RoastBeefSandwich 3 года назад

yeah they are more expensive but definitely easy to use for a homeowner. just make sure the ends of the pipe are nice and square or the sharkbites will leak over time.

@appleztooranges 3 года назад

@@RoastBeefSandwich I’ll keep checking. No leaks after almost a year. I’ll leave for now. I’m sure it be slow if it does happen. These are awesome compression

@RoastBeefSandwich 3 года назад

@@appleztooranges yep I have some in my laundry room. I left the wall open for a year just to see if it would leak, never did, closed it up.

@chriss1183 2 года назад

Aquor is nicer and for shark bite. I have had a copper pipe capped with a shark bite cap since June of 2015. No leaks.

@Cleevus 10 лет назад

Cool tools

@wayneolson6495 4 года назад

What is tne name of that PEX tool and where can I purchase one?

@RobotJustice 6 лет назад

Does Tommy know you have his drill?

@2loonscalling437 3 года назад

What is the name of the tool that expanded this pex B pipe and then pulled the collar over the fitting? I cannot find that...

@LumenChaser 3 года назад

this is pex A pipe I believe and I don't see this method being used anymore. Wirsbo is the new and improved way of connecting pex A pipe. expansion is still used but in a different way.

@billsmith9249 Год назад

@@LumenChaser that is a Rehau PEXa system.

@djnevous3us 4 года назад

I’m not comfortable with that amount of calking. I woulda put more

@davidpearson3304 3 года назад

It’s not your house, so it doesn’t really matter what you’re comfortable with.

@galehess6676 2 года назад

#fail. It comes in a full tube for a full reason. If you don't use the entire tube it will leak in less than a month.

@helened1358 2 года назад

I’m not comfortable with your comment 🤣

@MrGraygrizz 10 лет назад

Rich, I have never seen a pex manual expander tool like that, with those ss sleeves.....is that something new?.....What Brand of pex, or? is that?......I have a battery powered Milwaukee brand expander tool, I use with the Aqua Pro Pex Pipe, with the engineered plastic fittings....this system, also has the different sizes of pro pex sleeves, with a stop collar, that slides on, prior to expanding the pex piping, and then inserting the fitting etc......Thanks, Tim.

@ccrews0612 9 лет назад

Timmy Gee www.arisupply.com/advancedwebpage.aspx?cg=169&cd=4

@billsmith9249 Год назад

that is a Rehau PEXa system.

@dkroen17 5 месяцев назад

Very cool process. Do you feel pex is better then PVC?

@techguy9023 4 месяца назад

Haven’t had any pex freeze yet. Pvc yes

@timeisshorttruly8409 4 года назад

That particular faucet is ju k. Internal parts are aluminum and wont last long. Have had to replace 3 in past year

@stevenreeves1394 8 лет назад

This video never mentioned the proper (downward) angle to install the faucet so that all the water drains out properly when closed.

@Guillotines_For_Globalists 7 лет назад

I believe the frost-free faucet had the angled spacer mounted between the flange and the siding.

@nc3826 6 лет назад

That the point frost-free faucet angle should be double checked to make sure it drains when its turned off. They didnt talk about testing it for leaks too.

@billwdw04 6 лет назад

I agree. I was surprised that he didn't mention the necessary angle. It even freezes in Florida, sometimes.

@neilhansen3025 3 года назад

By these comments here, i can tell none of you know anything about plumbing. The piping is installed in his basement. The temp in that basement will not drop below freezing point. Then comes the 12” long “frost free” hose spigot. Guess what, that turns the water off inside the house about 2” where the pex connections were made! NOT gonna freeze boys! Stop with the pitch nonsense and letting water run out! Last but not least, did u see the expansion process? Guess what... if it did freeze(which once again, it will not) the pipe EXPANDS!! It has a superior burst rating between 500-1000 pounds!!! Stop posting false comments 🤦‍♂️

@stevenreeves1394 3 года назад

@@neilhansen3025 ok. Obviously I know nothing about plumbing. That is why I was watching the video. Also. I live in Minnesota. I had a frost proof faucet freeze on a house I bought about 10 years ago. North side of the house. Low temp was 27 below and we didn't get above 0 for 3 weeks. The plumber who fixed this for me told me the faucet should have been angled down. Good luck being the smartest dude around.

@Dicofol1 10 лет назад

PEX is very UV sensitive, It should never be exposed to sunlight and some parts of the pipe are exposed close to a window...

@Chungustav 6 лет назад

Dicofole UV doesn't penetrate glass. It was all inside

@donnbialik9085 3 года назад

PEX is UV sensitive. It cannot be exposed to direct sunlight, as it breaks down rather quickly. Indirect ambient sunlight degrades PEX at a rate about 8 times slower. PEX is ideal for in-wall plumbing. When it is used say in an unfinished basement, the pipe needs to be painted or covered in an ABS corrugated shroud. When installed properly by someone who knows what they are doing, PEX is amazing stuff.

@TheWickedOne5150 Год назад

When you have to replace that frostless do you have to hold it from the inside of the house? Or can you twist from the out side only? I have to replace mine and don’t want to have to open the wall on the inside to hold the nut if not needed

@AStanton1966 Год назад

It depends how the frostless was tied into the supply line. Do you have copper lines. If so, the frostless may have been soldered and you will need a torch to unsolder it. You can also cut the supply line going to the frostless. Then remove the frostless outward, away from the house. You can then slide a new frostless back in and tie back into the supply line. Checkout Sharkbite fittings on YT. If you solder a short piece of copper to the end of the new frostless you can tie it to the supply line weather copper or pex using a Sharkbite union without any soldering. And it doesn't matter if the supply line is dry or wet. Sharbite works with both.

@Pattheguy 2 месяца назад

I like how quick and dirty the video is but you should tell us what the specialized tools are called and how much they cost. The expansion tools im finding are >500$ Canadian. Might as well hire a professional for that.

@elbowmacaroni1408 Год назад

Are the different sized sill clocks or is it standard?

@jacksplumbingvideos7147 3 года назад

he used red pex on cold water red=hot blue=cold

@nolangietzen4366 4 года назад

I wish I was screwing into wood I had to screw into artificial brick an it cracked when removed the old faucet so I had to motar it all back together big mess an took forever

@jcaleca60 2 года назад

On that tool to expand the PEX pipe you have to turn it 6-3 position or it will leak the PEX pipe the electric one does it automatically

@beastking55 7 лет назад

were can i buy the tool at no one has it

@BacaMama67 6 лет назад

It seems to be the EverLoc tool - I can only find info on the Battery powered tool: www.rehau.com/us-en/mechanical-and-plumbing/everloc-plus/single-family-residential/product-details There is a distributor locator on the site.

@allenletizia321 4 года назад

What you use if don't have 1 expanding gun to open PEX up?

@ladd91 3 года назад

trying few secs with some hair dryer to make it more expandable

@allenletizia321 3 года назад

@@ladd91 I ended up using SharkBite worked out good .

@dylanfortushniok5214 2 года назад

What size drill bit so the pipe fits into the house?

@scgrindllc 11 месяцев назад

What is that tool I want one !

@leifharmsen 6 лет назад

Why not buy a frost free faucet made for pex rather than buying the wrong one and having to add a pex adapter?

@TicoTimeCR 6 лет назад

Some stores (including some Home Depots) don't stock pex-specific faucets or only have one choice of length. Much easier for them to just sell you an extra part. In low population areas you may only have one choice of store, so you buy what's available. If the choice is available though, yes, buy the pex one.

@GeeTheBuilder 6 лет назад

TicoTimeCR have you heard of this new invention called the internet? Apparently, you can order stuff and as if by magic it is delivered to your home.

@garysaylor8238 5 лет назад

@@GeeTheBuilder That's crazy talk, LOL

@stinkycheese804 4 года назад

@@Bigguy_33 Umm, don't get started with faster or cheaper when all this repair needed was soldering a faucet to a copper pipe, no pex or adapters or teflon tape or pex expansion tool, just standard pipe available for purchase anywhere, a torch available anywhere, and solder available anywhere, anywhere meaning any hardware store and some non-hardware stores. Well, you may need sandpaper or a brush or steel wool. If you don't already have those things then you probably aren't handy enough to do this either.

@billsmith9249 Год назад

@@GeeTheBuilder wow, aren't you a douche? That was actually a rhetoric statement. Has it ever occurred to you in that limited brain of yours that A) not everyone shops online, B) some people need something that specific hour, C) some people actually like supporting local businesses vs e-commerce, and D) you're still a d-bag.

@judoyodan 2 месяца назад

Why wouldn't you just buy a sillcock with pex end? Eliminates a connection and makes it simpler.

@chrisingram9798 3 года назад

Pex is the new polybutylene .

@bdee1840 8 лет назад

what is that tool he used for the pex?

@jpperry2117 7 лет назад

I think its an expander tool for Wirsbo PEX.

@hectorsanchez8244 7 лет назад

i like to buy want anybody know the name

@dadeho 6 лет назад

Its called the Rehau system

@billsmith9249 Год назад

that is a Rehau PEXa system.

@lazyman2473 4 года назад

Do you cut the water line before it gets to the the water heater or after ?

@AR-cp5dz 3 года назад

If you cut it after the water heater, the faucet would be delivering hot water.

@heroknaderi 4 года назад

I enjoyed it 🤩😎

@tooquic404 7 лет назад

Isn't red used for the hot side??

@rgeo27 6 лет назад

red tubing is supposed represent "hot water"

@Chuck59ish 10 лет назад

But how many people have put the collar on backwards and found after they did it?

@Maxid1 10 лет назад

Since there's no forcing cone on the other end of the sleeve, it'll probably just sheer the pipe when you try to force it on and not work. But I've never used it so I don't know.

@billwdw04 6 лет назад

That's his point, Ike. It should have been mentioned in the video.

@donsmith7354 4 года назад

Are all Silcocks frost free???

@What_Fred_Said 4 года назад

He said it will never leak. Yeah and dinosaurs can't reproduce at Jurassic Park either.🐱‍🐉

@lagg-alot8308 4 года назад

What size hole did you drill in house?

@awetanoah342 7 лет назад

Your channel is amazing. Thank you so much.

@KitchenerLeslie2 4 года назад

Aweta Noah these are clips of a tv show.

@jungleviper Год назад

Where do you get that tool

@alvilla701 10 лет назад

Is it safe to use plastic instead of copper, I have seen plastic water lines on new small homes but how long do they last?

@TNtoolman 10 лет назад

As long as the lines are used where they are not exposed to sun, do not freeze or become damaged they last forever... at a fraction of the cost of copper. Also, plastic will flex some if there is severe settling in a house or an earthquake... copper will not.

@charleschastain2674 8 лет назад

yes it's super plastic

@donnbialik9085 3 года назад

PEX lasts 100 year or longer. Copper pipe 70-80 years max.

@jimmysapien9961 Год назад

@@donnbialik9085 that’s what I’m talking about i’ll be Dead if I have to replace it again👍🏻👍🏻👍🏻

@mondavou9408 4 месяца назад

I wonder if this has failed at all. Didn't slope the sillcock and those PEX connections were never in my local market, I wonder if they went out of business.

@mattcox1368 7 лет назад

You know from listening to plumbers that have been doing this as a profession for many years they didn't tell you how to prevent busting another sillcock by installing it with the sillcock leaning downward to allow the water to travel back out of the sillcock when the water freezes so that it will not expand from freezing inside the pipe and split the pipe ruining your sillcock and forcing you to replace it! Come guys we're getting sloppy here!

@WiCapitalco Год назад

6 years ago you posted this tip. 6 years later I'm using it

@Kauppamopo 4 года назад

why put it so close to the ground? you need to crouch hard every time you wanna use it -.-

@stinkycheese804 4 года назад

Heh, the ease of placement is dictated by leaving at least a little distance between it and the floor above it... unless you want to make a right angle and tear out some of the interior wall to do that.

@darlenebowers5207 5 лет назад

There is no way, I'm getting under the house, no telling what's under there!!!!! However, your demo was awesome, I'm just not hold enough to do that.

@bl_leafkid4322 Год назад

Wow no air in pipe!

@charleshoward1192 5 лет назад

How do you remove a soldered PEX one already installed?

@Jon-gj3fe 3 года назад

You cut it off.

@ScoutCrafter 7 лет назад

When it comes to water and pressure I have trust issues... Nice video though...

@donnbialik9085 3 года назад

Watch some of the PEX A & B water pressure tests. These things go to almost 1000psi. The only way PEX-A fails is if the fitting is defective or the pipe is expanded improperly. I felt the same way before doing the research. Only thing I still don't like is having to install a black ABS plastic sleeve around PEX-A that is exposed to UV light.

@YorgiVonstrous 3 года назад

Any idea how I can get me one of those expansion guns

@I-Agreewithdisrepect 2 года назад

Who make that tool??

@billsmith9249 Год назад

that is a Rehau PEXa system.

@CUDA1970Terry Год назад

I have been making additions and replacement lines using PEX. However, instead of soldering new connections to copper pipe to connect to the PEX, I have been using Shark Bite connections. They can connect same size copper to PEX or PEX to PEX. I have been using these for several years now and I have had no issues with leaks or loose connections.

@oldhandyluke Год назад

I wouldn't recommend sharkbites as I have seen way to many that were properly installed leak. You're best off sweating on a pex adapter.

@borys444 5 лет назад

I would use shark bite just to avoid buying the pex tool especially if u don't plan on using it for a long while after a project is done.

@peterharper9703 5 лет назад

No Sharkbite connectors 😭😭😭

@heavenlyskys1 9 лет назад

where can I find the blue and red clamps ??

@heavenlyskys1 9 лет назад

heavenlyskys1 anyone ?? lol

@alvilla701 8 лет назад

I'm sure lowes or home depot have something similar

@magnumblaster 2 года назад

What real plumber uses channellocks on squared fittings?

@silvergrizzly316 6 лет назад

A blind man could do that job. Install that in a double wide!!! 💪

@vlogerhood 10 лет назад

I much prefer the simple crimp ring to that setup. I am sure that method is even less likely to leak (but I am sure it costs more), but I have yet to see any crimp ring leak...so yeah.

@cup_and_cone 7 лет назад

vlogerhood - Copper crimp rings or the stainless pinch clamps? A pinch clamp leaked on the PEX in my old house's bathroom two years ago...ruined the drywall. Granted the installation job (probably 10 years old) was probably to blame, because it was a very short run between two brass manifolds under a lot of awkward side tension. My new house uses all the plastic expansion rings on the PEX. That scares me even more than the pinch clamps...

@mangravy2000 7 лет назад

I have those white expansion tubes I think you're talking about. I've had them for 5 years my neighbor has them for 10.

@trainofthough0242 7 лет назад

I had a fitting shoot off the crimp ring before because the guy had way too much water pressure going into the house. The thing shot right off, caused a ton of water damage. That's why you don't mess with water pressure. I like the ring and crimp method myself, never had any issues aside from that one time which wasn't the fault of the ring anyway. I like the expander/sleeve method too but that's a big friggin' tool to be lugging around. How the hell are you supposed to get that under tight vanities to get valves on? There's no way, but for a job like this though where you have a lot of space to work in, I think it's great. Plus, it maintains the inside diameter of the pex whereas the crimp/rings reduce the diameter. Not that it makes a significant difference but if you want max pressure, the expander/sleeve might be the way to go.

@berniemac8413 4 года назад

Cup & Cone how are the plastic expansion fittings holding up on your PEX piping? Do you still worry about them leaking?

@jimmysapien9961 Год назад

@@trainofthough0242 stainless Rings For Outdoor !!!!

@sw204me 4 года назад

I have not seen in any plumbing video or store, that kind of pex tool. I would not trust that fitting at all. Just got a normal sleeve and a crimp tool, expanding and then punching is not something I've seen anywhere. Also the caulk on the outside faucet was useless and did nothing. Should have caulked on the plate itself and then again on the inside.

@billsmith9249 Год назад

that is a secure fitting and that is a Rehau PEXa system.

@ryanroberts1104 4 года назад

It's already been tried before the "king" gets to use it for the "first" time. The ground is wet and there is no air in the lines! And no homeowner is using that tool...they're using the cheapest crimper they can find at HD or god forbid sharkbite...

@ryanroberts1104 4 года назад

@Stephen Clark Wow, you're an idiot!!! You have no idea what you are talking about. PEX is VERY good pipe, and NO, it is not at all like black poly tubing. Totally different materials. Your water supplier has NOT "banned all plastics", first of all the water department doesn't make codes, secondly, plastic is used in absolutely everything. Galvanized is no longer in use, iron is not ever used in a house. Copper can still be used although it is extremely rare in new installs due to cost and the fact that PEX is so much better. Almost every water line underground installed today is either PEX, PVC, or PE. (black poly) They all work great, and none of them are "banned". Nobody installs metal water lines.

@billsmith9249 Год назад

well, mr Know-NOTHING, that is NOT home depot product. that is a Rehau PEXa system and is a very secure system. You just proved how ignorant you are. Thanks for telling the world.

@JasonBorne2 6 лет назад

It doesn't show anything about disassembling the unit. If it never gonna leak, it will be hard to disassemble in case it is needed!

@lyluu4136 6 лет назад

Jay Lee.

@mikeellis7412 4 года назад

I had this happen. When I tried to remove the faucet from the outside the pex pipe just twisted and caused a leak in the pex inside the wall of the house. Had to shut off the water overnight and cut a hole in the wall at the pex to hydrant connection. Flooded the den and caused carpet damage. The pex to hydrant fitting needs to be anchored so the faucet can be removed without causing the pex to twist and break.

@Dropsix 4 года назад

@@mikeellis7412 This is exactly what I am dealing with. The donkeys who built the house did this and now the faucet is leaking so I want to replace it. Obviously you turn the tap and it just spins....

@BruhSayWhat 3 месяца назад

Red pex for spigot 🤦‍♂️🤦‍♂️

@rawbacon 4 года назад

PEX Fan Boys Rejoice.

@jasonshaffer212 5 месяцев назад

Should use the proper wrenches, not channel locks. Blue pex and a shut-off.

@quentinmurphy1001 4 месяца назад

Why,,the wrench didn't slip

@01chale 7 лет назад

come on,,,,must of us regular guys don't have those kind of tools!!!!!

@brh5073 6 лет назад

They sell different pex crimping tools that are much cheaper

@tooltime4640 4 года назад

Buy them then. Can’t do the jobs without the proper tools. Why do you think the pros charge you

@justanotherchannel6097 2 года назад

Shark bite

@ccdogpark 7 месяцев назад

2024-02-06 1.1 million views. I just watched this 4:16 video. I wish I knew about this 3-4 years ago when we had to replace our outdoor spigot. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RFVSR-7GfkU.html How to Replace an Outdoor Faucet with a Frost-Proof Sillcock | This Old House

@jollyandwaylo 8 лет назад

Not a very workmanlike job. Pex stapled to the bottom of joists, run diagonal. Yeah, just put in what you need and screw the next guy.

@bill8638 8 лет назад

+jollyandwaylo nice to know you are so perfect

@jollyandwaylo 8 лет назад

+Bill Newell I do try to take into account the next guy that has to do something, Don't you?

@braun247 7 лет назад

I was thinking the same thing. Good luck to the guy that wants to finish the basement.

@EDHBlvd 6 лет назад

Because this wasn’t Tom Silva. He is a class act.

@leehancock2782 6 лет назад

Did yall see how big that house was? They will never finish the basement. CHILL

@trubrewman 2 года назад

If I have red left over, or somebody donates, I'm using it.

@Alucard45000 5 лет назад

Nothing is frost-proof..

@armymobilityofficer9099 4 года назад

I had a home where the "frost proof" faucet froze and busted above a concrete slab. The entire house flooded, I have numerous rental houses without "frost proof" and I have never had a problem. I live in North Alabama, so we do not have the extreme cold like y'all have up North.

@francisvaliente599 3 месяца назад

Bullshit I don’t need all those tools

@caper58 Год назад

it appears you are installing as pex-a pipe (since you needed to expand it to side) over a pex-b fitting. Things that make you go hmmmmm.......

@billsmith9249 Год назад

You are very incorrect. that is a Rehau PEXa system. And for the record, you CAN use pex-b fittings WITH Pexa systems; just not the other way around.

@MightyHex 5 месяцев назад

So low

@shaynesabala 6 лет назад

Great if you have the expensive tools. Not so great if you are only doing your own house.

@rgeo27 6 лет назад

if you are not very critical about somewhat less water and more about saving a lot of money go with crimp toll and rings

@pmmichalczuk 5 лет назад

Home Depot rents the tool out for $12/4 hours.

@markbrinton6790 3 года назад

What's with these fools using drills, hammers, etc and not wearing eye protection? Don't learn the hard way......

@billsmith9249 Год назад

LOL, i was using my miter saw, hand tamper, 40 pound maul, my impact wrench and 2 different power drills this weekend so far. The only time I used safety glasses is when I used my chainsaw. If you were meant to go through the remaining part of your life maimed, it will happen no matter what safety precautions you choose. So why use any? Well, I'll tempt fate a little but I won't challenge it

@markbrinton6790 Год назад

@bill smith reason it however you like. It's still foolish not to wear eye protection. Maybe you'll learn the hard way, i hope not.

@billytheweasel 3 года назад

1st, get an unfinished basement. 2nd install the faucet correctly by spending hundreds of dollars on 'one-time use' specialty tools. Done! Or get a plumber to come our and good luck with that!!! Gotta be a better way...

@malavoy1 3 года назад

You can rent the tools.

@billsmith9249 Год назад

What makes you think a home owner would never used a specialty tool more than once? You're limiting yourself. Pex and plumbing is easy to install if you understand it. Drains and venting is a little more challenging. What are you going to do in the middle of the night if you discover a leak in your basement or crawl space from a burst pipe? Call a plumber? First, good luck getting ahold a ANYBODY at that hour, and Second, GOO LUCK when he/she hands you the repair bill because those would be specialty after hours prices.... so, spend $1,000+ for one visit or buy a $200 tool and learn to use it...... or, according to you, do nothing. Just sit and ponder life's problems. I chose the first option and there is very little I cannot do and if I cannot do it professionally or better THEN I hire it out.

@billytheweasel Год назад

@@malavoy1 Yep, easy peasy and affordable too.

@galehess6676 2 года назад

#Fail. The caulk comes in a full tube for a full reason. They only used like half the tube.

@patmadix5706 4 года назад

Biggest mistake is no fall . Improper installation

@gunsnstuff4040 Год назад

Sloppy work.

@koltonriley5929 Месяц назад

Am I the only person deeply uncomfortable with press fittings??

@sonicfuker 5 лет назад

He said cocking.

@ScienceBitch123 3 года назад

Those are pliers, not wrenches, and the wrong tool for the job

@EDHBlvd 6 лет назад

2:05 all the caulking just went deep in the hole when he pushed the valve in. Fail.

@Blox117 6 лет назад

lmao

@Blox117 6 лет назад

not only that but they put the faucet next to a window where all the water will drain into

@Trials-and-Tribulations 6 лет назад

No your wrong. That chalking is a sealer that will expand kinda like the Foam insulation in can. The white chalking prevents water going into the house. Thinking of the chalking around your bathroom tube when you take a shower. Unless you bath in a lake. haha