How to Install a High Security Euro Cylinder Lock

Подписаться 440 тыс.

Просмотров 175 тыс.

50% 1

#geekstreet #yale #security
💲Check prices / 🛒Purchase here:
US - amzn.to/2ByQBIp
Canada - amzn.to/2SgYcCI
UK - amzn.to/2Rcw7PD
Germany - amzn.to/2AbMzWO
France - amzn.to/2T2a7V6
Italy - amzn.to/2QNiHtZ
Spain - amzn.to/2Sfy2QO
India - amzn.to/2jQNyCV
Geek Street is a participant in the Amazon Associate Affiliate program; as an Amazon Associate I earn from qualifying purchases with no additional cost to you
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
🛒 www.amazon.co.uk/shop/geekstreet
🛒 www.amazon.com/shop/geekstreet
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
🔔 Don't forget to Like this video and Subscribe to our channel (IT'S FREE)
▶️ / geekstreet
➡ Follow us on Social Media
💙 TWITTER: / youtubegeekst
🧡 INSTAGRAM: / youtubegeekstreet
💜 FACEBOOK: / youtubegeekstreet
➡ Contact us
✉ Email for Business Enquires: RU-vidGeekStreet@outlook.com
➡ Free Amazon Trials
🆓 US - Prime - amzn.to/2Rde0Xd
🆓 UK - Prime - amzn.to/2N8jSgX
🆓 Germany - Music Prime - amzn.to/2DGwZXm
🆓 Italy - Prime - amzn.to/2N77iP6
🆓 Spain - Prime - amzn.to/2IrQGAG
✳️➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖✳️
HIGH SECURITY 3* TS2007 EURO CYLINDER FROM YALE
(Brass or Nickel in choice of sizes)
Get 3* security without extra hardware!
Maximum security TS007:2014 3 Star euro cylinder protecting against Lock Snapping, Lock Bumping, Lock Picking, Lock Drilling, Extraction and more.
Manufactured by Yale, the worlds most trusted brand, our latest security cylinder comes with a unique 10 year guarantee; further proof that this is the lock to choose when securing your home or workplace.
Features & Benefits
•TS007:2014 3 Star approved - highest current rating
•Anti-Snap - sacrificial section leaves cylinder intact
•Anti-Bump/Anti-Pick - side pins and multiple shear-line
•Anti-Drill - undeniable hardened steel resistance
•Anti-Screw - resists screw attack and extraction
•Toughened Central Bridge - unparalleled inner strength
•High Key Security - dimples and groove with 100,000 differs
•BSI KM559658 and BSEN1303:2005 - secured by design
•10 Year Guarantee - buy with confidence
It's not just the technological advances within the cylinder that make the Yale Platinum a great choice, key security has also been improved. The high security dimple cut flat key is reversible meaning that it's easier to use and extra keys can be ordered using a key code on the ID tag supplied.
What you get
Each cylinder lock is supplied with3 x dimple and groove keys with key code card and fixing screw.
IMPORTANT Please check the measurement image above to be sure of getting the correct size.

Наука

Опубликовано:

9 май 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 172

@GeekStreet 3 года назад

✅ Don't Forget to Like👍 this Video, make a Comment✍and Subscribe ▶ it makes these videos possible 😊

@janieroberts3491 2 года назад

Thank you so much , very detailed video, I have waited three days for someone to come, still havnt shown up. went to b and q, fitted it myself,…….oh, and I’m a single lady in her 60s. 👍👍😀😀

@GeekStreet 2 года назад

Excellent good to hear the video helped!

@karenturner7184 2 года назад

Thanks for saying that, I am going to try and do mine.

@paulh9 2 года назад

Hi your video was excellent. My front door lock packed in this morning, I've never changed a lock before but found your video which gave me the confidence to do it myself. It literally took 2 minutes. Thanks very much 👍

@tsuchan 4 года назад

Thanks. That was really interesting, and so well explained, with an amazingly effective camera technique. I only arrived at the video to find out what a Euro profile cylinder lock is, but learned loads!

@Sirpopop 2 года назад

Same boat dude

@TbagUhard 2 года назад

A brilliant clear tutorial showing how to change Euro locks and some of the issues one might face while doing so and more importantly, the solutions. Better vid than everything I’ve seen so far, let’s hope I manage my locks just as easily Update: I changed both the locks on my front timber door today, both the euro cylinder and nightlatch. Had a few small issues as my door is a bit more complicated but got resolved and done. I feel like a genius right now 😂

@GeekStreet 2 года назад

Thanks!

@stevepeet8460 5 лет назад

Very helpful, thanks very much, I was going to get a locksmith to do it but its really simple so I did it myself

@alexwilson6513 4 года назад

That was brilliant, thank you so much for making that!

@karenturner7184 2 года назад

Thank you, you made it look so easy for me to do. I am in the USA so hoping it works, everything I touch seems to be more complicated than when I was back home.

@paulcresswell6230 5 лет назад

BIG THANKS for this video ..... the new ones I`d just got had those lugs on and I was about to get the file out!!!!!!!!. Now I know what to do - thanks again.

@GeekStreet 5 лет назад

Thanks for the comment much appreciated.

@zog97xy 4 года назад

mine wont go in with the handles off because of those lugs!

@liulfrhvitr5427 5 лет назад

Fantastic video!!! Super helpful, thank you so much for taking the time to educate us on how to do this..

@GeekStreet 5 лет назад

Your welcome, glad the video helped don't forget to like and subscribe!

@Liv-fw1nu Год назад

Saved me a lot of money thank you! Wanted to upgrade our locks but couldn’t afford the prices locksmiths were quoting. Only took me 10 minutes and the price of the lock

@faj3251 4 года назад

My door handle has the anti drill swivel, I would like my old locks put on my new door, issue I'm having is the anti drill swivel within the door handle (exterior) is stopping my key from being fully inserted?! If I unscrew handle would I be able too pop it out? Or do you reckon it is built in withings the handle??

@ourchanneluk7821 4 года назад

Clear and easy changing the lock than other dodgy youtube uploaders. Great thanks always do something like this from bottom of your heart ✔✔✔

@GeekStreet 4 года назад

Thanks for the comment much appreciated!

@deanjohnson1711 4 года назад

My new lock had them thing on so had to take the handle of thanks for this xx

@marcusdelanoeast 5 лет назад

Thanks for posting this clip -- super helpful!

@GeekStreet 5 лет назад

Thanks for the comment much appreciated. Hope you can support my channel by liking the video and subscribing.

@deelawrence1135 4 года назад

Very easy to follow - except ours doesn't have a retaining screw visible - starting to wonder if someone has tried replecing it before but maybe snapped the head off the screw.... or are there these type of locks that have hidden screws ?

@jeffuk3940 3 года назад

Thank you for sharing your knowledge greatly appreciated

@lmvfaustino 4 года назад

Hi, nice video. One small question, is it usable with one key on the inside and another on the outside? Thanks for the nice video.

@sajidmah62 4 года назад

Thankyou very much very helpful video.

@valvelifter1 4 года назад

Excellently produced tutorial video. Thank you.

@GeekStreet 4 года назад

Thanks for the comment much appreciated!

@DickDeDog1 5 лет назад

Nice and clear not rushed. Thanks.

@GeekStreet 5 лет назад

Thanks for the comment much appreciated!

@aweaklingify 2 года назад

Great video thank you 👍👍👍👍

@johnsmall3105 Год назад

Since it's easy for a burglar to snap a handle and gain access to a cylinder, do you think it would be a good idea to weld the outside handle to the door instead of letting it be fixed with screw? (my door is an aluminum door) provided that you can still change the cylinder when needed by removing the plate that's on the inside of the door and then removing the cylinder from the inside.

@HienNguyen-bc2ht 6 лет назад

Well done mate

@VirtualRealityPilot 5 лет назад

Great vid - nice and simple explanation - ta muchly :-)

@GeekStreet 5 лет назад

Thanks for the comment much appreciated. Hope for can support my channel by liking the video and subscribing.

@matt5802 4 года назад

Thank you

@ms-zo3zb 4 года назад

Very informative

@keninblack 3 года назад

Very handy, many thanks for posting.

@GeekStreet 3 года назад

You're welcome!

@mickyjb2003 4 года назад

Thanks that was great.

@GeekStreet 4 года назад

Thanks for the comment much appreciated don't forget to like and subscribe!

@mickc2339 5 лет назад

Great thank you 👍

@GeekStreet 5 лет назад

Thanks for the comment much appreciated!

@curiousjoe395 9 месяцев назад

I’ve got this lock with the thumb turn on the inside. The balls that stick out on the cylinder body are preventing me from sliding the cylinder into the lock. Any ideas?

@dexlo5791 3 года назад

I managed to change my lock thanks to you. Thank you.

@GeekStreet 3 года назад

You're welcome

@jlindell6532 4 года назад

what is name with the round knob inside for locking instead of key ? and where do i find it? and does it have to be same make as before? thanks

@SaxJockey 2 года назад

Thumb Turn. Most brands offer that option.

@karenbrowne9332 Год назад

Great video

@bhavpatel6929 5 лет назад

Hi, I’ve bought the platinum 3 star Yale lock as demonstrated. One of the site workers has measured the lock and I have just tried to install it and hit a brick wall. The two little metal balls will not let the new lock go through. I’ve entered through exterior first and interior first but the same result. What can I do? Please help. When I take my handles off, it just hits the little metal balls and doesn’t go in any further where as yours seems like it clicks. Help help help

@mark9701968 5 лет назад

Take off the handles first 👍

@carlyd4562 5 лет назад

Same with handles off.

@parkerc721 2 года назад

Same issues like Carly… any solutions? My case is not like Mark but Carly

@samkola6343 3 года назад

awesome 👌

@Rajjjjjjjjjjjjjjjj 3 года назад

Quick question please. Would it be possible to operate the lock from outside with a key in the holder inside. This is for the situations where the key is in the lock inside and you may want to open the door from outside.

@RacingSlow 2 года назад

Yes but not the other way around

@christopherlopez5549 Год назад

Hello good video I have a question I just bought one from yale brand but I get it from Amazon and the seems that is not the correct one , do I need to do something before use it ? Like remove a lock or something ?

@GeekStreet Год назад

I'm pretty sure I've shown all you need to know in the video, so a bit confused by your question.

@wqvawcaw 4 года назад

Could you use that exact same cylinder for a door where the lock faces the RIGHT SIDE of the door frame? what i mean is, does the orientation of the cam matter? Here the cam is on the oposite side of de door frame (right from the cylinder if you look at it from the front), but if you put it on a door with the lock to the right, the cam would be between the cylinder and the door frame. Does that affect anything? thanks

@GeekStreet 4 года назад

Yes you can, make sure you measure both sides of it.

@wqvawcaw 4 года назад

@@GeekStreet thank you!

@julianafernando5230 4 года назад

Thanks well explain

@GeekStreet 4 года назад

Thanks for the comment much appreciated!

@Andy-lm2zp 3 года назад

cool thanks

@TremereTT 3 года назад

I love the idea of installing highsecurity locks in glasdoors..... security first!

@Magic_Mal 3 года назад

😂 👍

@faiyezanadeem7944 3 года назад

interesting video but I got a question..... in your video you mentioned 5.5 cm external and 4.5 is internal when measuring you mentioned 5.5 cm is inward and 4.5 cm external. confusing plz check.

@gmortimer20031 4 года назад

A lot don't realise that you have to remove the handle assy. to get one of those pinned Yales in. You should stress a bit more that low-level snap-proofing is defeated if the cyl. sticks out too far. Not everyone can afford £40-50 for a lock. I fitted ERA 3* 6-pin - cheaper than that Yale, about £30, and I just want to deter the casual burglar, nothing of enough value to justify pro treatment, like Rushden and Diamonds would pay a trfr fee for Kane, my experience is that most are pissed when they break in! A mole wrench or an adj. spanner (they snap sideways just as easy). Snapping has made this feasible - what do you think of the ERA? Could you show how to fit a replacement pair of cyl's in a modern UPVC double door, on the "wrong" side? The sort with the fake strut down the middle which blocks access to the retaining screw? Do I need to dismantle the whole mech? xxx Subbed and liked.

@GeekStreet 4 года назад

Thanks for the comment and support much appreciated. ERA is definitely a good lock no doubt personal I preferred the Yale because of the pinned design. I've installed on a set of double doors and what a hassle I had to remove the side plate on the door the part the multi locking system latches onto and then drill a small hole in the side from what i remember to enable me to remove the lock, I'll look into doing a video at some point showing how to do.

@andrewdaley3081 5 лет назад

thanks for this clip. andy England 🇬🇧👍🎄🎄

@GeekStreet 5 лет назад

Your welcome!

@andrewdaley3081 5 лет назад

Geek Street will i be able to swap a twist euro lock for key both sides lock the same as in your clip would you please let me know and what 1 star locks under 35 pounds do you recommend. thanks andy England 🇬🇧🎄🎅🎄🎅🔑🔑🔑

@GeekStreet 5 лет назад

Yes you can definitely replace go for either Avocet or Yale 1 star euro cylinder. eBay has brand new ones around 10 -15 depending on size. Hope that helps.

@wartbiter 5 лет назад

Thanks for this information - those extra nobs are a real nuisance. Makes a 5 minute upgrade into a 20 minute job.

@GeekStreet 5 лет назад

Thanks for the comment, yeah a hassle but definitely worth doing. Don't forget to like and subscribe.

@lorrainejohnson3369 4 года назад

Geek Street how did you manage to get those nobbly bits to slot into the existing chanel in the door,i have tried both internal and external without the handles and cant get the new anti snap lock to slot into place

@verylittlefish11 Год назад

@@lorrainejohnson3369did you manage to get it fitted in the end?

@verylittlefish11 Год назад

@@GeekStreetwhat are they actually for?

@DJFearRoss2 5 лет назад

Is it wrong if at the end it is not flush with the handle?

@christiano8088 3 года назад

Yes you should be able to get the correct length. Leaving a bit sticking out makes them more vulnerable to attempted tampering.

@anthonyatkinson3480 4 года назад

Despite taking the door handles off and old lock out the new lock will not go all the way through due to the little lumps sticking out. Any ideas?

@aljaxon69 3 года назад

yeah same here. how come no one has adressed this issue? do the lugs need to be filed off or dremel some notches in the door lock housing? or force through with the biggest sledge hammer you can find?

@SaxJockey 2 года назад

@@aljaxon69 NO!!! The bumps are part of the design, to prevent the cylinder being forced inside the door during an attack. I am informed that provided you measure up and buy the correct size cylinder, it should fit. The cylinder has to be installed from the outside of the door, and have to remove the door handles (bumps not pass through external handle). The idea is that the bumps shoulder up to the metal frame inside the door. If it is a thumb turn cylinder, I understand the thumb turn needs to be removed in order to pass the cylinder from the outside, through the metal frame. There is a grub screw on the thumb turn to remove it. Having said all that, I can see that this Yale cylinder will not fit into my patio doors; the metal frame inside the door is very thick, meaning the bumps will not let the cylinder pass far enough through. They should be fine on my other doors so I have ordered some to try out.

@piratemurph2311 Год назад

@@aljaxon69 I had the same issue, the lugs wouldn’t get past the upvc door frame so I used the side of a drill to slightly widen the barrel shaped hole so the lugs would squeeze through. Easily done as it’s only plastic.

@curiousjoe395 9 месяцев назад

@@SaxJockeyany updates on this? I’ve got the same issue. Haven’t tried removing the thumb turn and sliding in from the outside yet. Tried sliding in from the inside and the lugs stop it from going through.

@SaxJockey 9 месяцев назад

@@curiousjoe395 I installed the Yale on two doors, no problem. Remove external handle, insert Yale cylinder from outside, metal bumps intended to come close to the metal within the door (security device to prevent being knocked through). If thumb turn, remove that (loosen grub screw), then re-fit once cylinder in place. I had to use a different type of lock on two other doors, because the metal bumps fouled the metal plate within the door.

@cbing4036 5 лет назад

Don’t suppose you know how to install those ring kits ?

@Cleric775 5 лет назад

Unfortunately, this lock has been picked on RU-vid. Any locks would you recommend?

@PloWarrior1 5 лет назад

Cleric775 nearly every lock has been picked on RU-vid, but these are by locksmiths or locksport guys. Your average criminal cannot pick high security locks. I recommend the ABS 3* lock or the ultion 3* which have been picked on RU-vid... but this lock is absolutely fine too...

@BD90.. 5 лет назад

The Abloy protec 2 euro has not been picked on RU-vid but I don't know if they sell them with anti snap. This lock is perfectly fine for use.

@PloWarrior1 5 лет назад

Anti snap is the most important thing though, they protec might have reinforced bar at bottom though. Banham is well up there too if your in that price range.

@cbing4036 5 лет назад

Does the end marked EXT mean exterior to outside ?

@GeekStreet 5 лет назад

Yes that's correct.

@cbing4036 5 лет назад

Thank you sir.

@GeekStreet 5 лет назад

Your welcome!

@p.santos6644 5 лет назад

I have a problem, I don't have the key to a line the cam, so the lock is stuck. What can I do ? Thank you for sharing

@GeekStreet 5 лет назад

Thanks for the comment but you have to have the key to line the cam.

@tiberiusclaudiusnerogermanicis 4 года назад

Locksmith or learn to pick locks or if it's not a high security then you can drill it out.

@Arneby 4 года назад

Requiring keys on both sides spells disaster when there is a fire in the middle of the night. Get a cylinder with a thumb screw on the inside. In this case that would be Yale DL35.

@MinkieWinkle 3 года назад

many of them can be manipulated with a thumb lock tool via the letter box, if you do get one, use a thumb screw that needs to pushed in or pull out as well as rotating, that way you minimise the risk of such a tool.

@cnutsack 3 года назад

You could just leave the key inside the cylinder once you get inside. It'd be the same as a thumb screw, but safer when you're not home.

@bcroad2686 2 года назад

Why does mine not sit flush from the outside?

@ericclaptonsrobotpilot7276 3 года назад

*Laughs in LockPickingLawyer*

@shazzaworks1720 2 года назад

High sec lock and a glass door?

@PanPuchacki 4 года назад

Great video but (there is always a but) - what's the point of high security lock if the whole door is made of glass? I believe that's a customer request.

@GeekStreet 4 года назад

I'm hoping if that ever happened the person gets cut and bleeds to death on the street running away!

@Mark-ms5pn 4 года назад

Can't people just hammer out the panels anyway?

@markhudson3354 2 года назад

Very good but it’s not necessary to remove the handles.

@damo8754 Год назад

Does it matter that my new lock is sticking out on the outside and flush on the inside?

@GeekStreet Год назад

I'm pretty sure it should be flush on the outside.

@awilderireland Год назад

Preferably flush but a little is okay. Some doors don't fit the standard lock sizes. Too much out and it makes it easier for a thief to grip the lock. Don't ask me how much is okay. But I'm sure Google will help.

@damo8754 Год назад

@@awilderireland thanks guys I switched out the lock for another one and now fits exactly. Measure first buy once 👍🏻

@atklm1 3 года назад

Assuming that the glass is 5 cm thick and durable enough so it can stop an axe, the door still needs metal security strip, or it opens in 2 seconds with a crowbar.

@GeekStreet 3 года назад

Metal strip in the middle you mean?

@atklm1 3 года назад

@@GeekStreet Yes, I'm not sure what is it name in English, but it's usually 25x4 cm steel strip that is fixed in the middle of the door where the lock is, to prevent crowbar attack.

@GeekStreet 3 года назад

@@atklm1 ah ok, I know what you mean.

@mariloua5135 3 года назад

Where this place

@GeekStreet 3 года назад

England

@ImranHussain-ub2fk 3 года назад

Thank god I watched this I saved 120 quid

@GeekStreet 3 года назад

Glad to hear the video helped!

@flexmo7857 3 года назад

Great video but why would any thief spend ages opening lock when you can simply use a simple window breaker.

@JamesBrown-mh8vu 4 года назад

I bought these locks because I like the look of the keys 😂

@GeekStreet 4 года назад

Lol

@GeekStreet 3 года назад

@@jamesm4172 you fitted from the front?

@GeekStreet 3 года назад

That's a real shame.

@andyp9131 5 месяцев назад

I've fitted many of these when I was younger as people would say they want a better lock than what the council put on and a locksmith believe it or not would charge from £30 to £50 to do the same thing well dint u tuber IAM doing mine in a few days

@ustadhfahadsabri3395 4 года назад

He says so like hundred times

@GeekStreet 4 года назад

Thousands of times

@flatron4288 3 года назад

New cylinder to short🤷🏼‍♂️

@syedaliii8920 4 года назад

Nice tutorial. But that's a lot of money spent on a lock that has a glass on the door. Burglar would smash the glass and get in.

@GeekStreet 4 года назад

Thanks for the comment, The idea is that will cut themselves on the glass and bleed to death running away!

@cnutsack 3 года назад

@@GeekStreet I dropped a upvc glass segment once, and it shatters like car window glass. It's not gonna cut you, but you might slip on it.

@GeekStreet 3 года назад

@@cnutsack ok so if it ever happens and I hope it doesn't...they slip break their neck and die.

@mattb6542 2 года назад

Top tip, get a grinder and grind them dimples off!!! No way to install this in a metal door otherwise. Thanks yale......

@mknight7209 5 лет назад

@priestmarmore6750 3 года назад

Using a "high-security" lock on a glass door seems a little bit overkill

@Robbolagger1956 3 года назад

Not really, when you see how easy ordinary Eurolocks can be snapped! Also, thieves dont want the noise caused when smashing glass to alert you, so it isnt the favouref method of gaining entry.

@mozmiah5596 5 лет назад

Why did you have to take handle off? When you could've just changed the cylinder lock

@GeekStreet 5 лет назад

There are some notches on the actual lock and that requires you to take the handle off otherwise it won't fit.

@iguanaman08 5 лет назад

@@GeekStreet I have the same lock with notches. I've taken the handle off but they still catch on the metal frame that the barrel slides into. Now I don't know what to do.

@GeekStreet 5 лет назад

Sounds like you may have brought the incorrect size.

@claireguider8118 5 лет назад

@@iguanaman08 me too, how did you fix this?

@tiberiusclaudiusnerogermanicis 4 года назад

@@claireguider8118 buy the correct size

@shqboot2006 5 лет назад

SO .....

@stokie1035 2 года назад

But not anti snap. Easy

@BD90.. 5 лет назад

You don't have to remove the handles.

@linleybaatjes9372 3 года назад

732 so's died in the making of this video...

@smudgersmith1786 5 лет назад

So... When did so become so much part of modern speech. So!

@GeekStreet 5 лет назад

So ... Anything is possible in the world of RU-vid.

@janeweedon6335 3 года назад

'So' has become the new 'absolutely'. In the USA though, it's still beaten by 'awesome'.

@smudgersmith1786 3 года назад

@@janeweedon6335 It absolutely has... So, where have you been for 2 years?

@janeweedon6335 3 года назад

So...so..so..

@GeekStreet 3 года назад

So? 🙃

@skippercaship 3 года назад

stop saying so LOL

@nihilisticnut9916 4 года назад

Scares me how fast the pickers can even do this kind of barrel.

@makis2811 3 года назад

Soooo...

@Billyg215 24 дня назад

High security locks????? take a look at the lock pickers on here and see how long it takes to pick these locks.

@anthonysnape5934 4 года назад

Opposite

@SoloMickyB 3 года назад

So, I was watching this video, so, while it was playing I heard the word "so" so many times in the first 3 minutes I sooo wanted to stop watching, so I did, so, I don't know what happens after the 3 minute mark, so it was pointless uploading it in the first place. How many times can anyone say "so" in one video and why ?

@razdog 5 лет назад

I’m having no luck with my lock, the cylinder will not budge. It feels like it’s still locked in place. Do some locks/doors have another screw that holds cylinder in place?

@GeekStreet 5 лет назад

Generally no, there is no additional screw. You do however have to put your key in and turn slightly. Give it a go and let me know how you get on. Double check you are doing the right screw.