How To Install A MaxxFan On A Van! Airflow Baby!!

Подписаться 87 тыс.

Просмотров 42 тыс.

50% 1

The Maxx Air 7500k is a fantastic fan choice for your camper van / van conversion. In this video I go over how to install it onto a Mercedes Sprinter Van. There are some hidden tricks that make the installation easier, all of which I cover in this video
Product Links:
Maxx Air 7500k - amzn.to/2Euqbtb
Sprinter Mounting Bracket - ebay.to/2EpbHei
3M Windo Weld - amzn.to/2PqCnBM
Dicor Lap Sealant - amzn.to/2M2sw2N
Dewalt Drill & Impact Driver - amzn.to/2RYKzdX
Rust Oleum - amzn.to/34tRheA
Butyl Tape - amzn.to/2YSOWsA
Support the channel on Patreon: / seven_osavage

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 91

@darrenh20102 3 года назад

I love how you openly admit to your mistakes and then show us how you solved the problem. It saves us wannabe van builders from making similar mistakes and so the info is priceless. Thanks

@baopham8676 2 года назад

Nice tutorial on the installation. I recommend placing the seam of the Butyl Tape on the back end of the Fan bracket. While driving, airflow pushes water towards the back of the van. Water will reach the front part of the fan then channel over, around and off the fan. The back side gets the least blast from the rain

@trippymiracle1157 5 лет назад

Thank you for being thorough in your sharing of instruction. Details of all kinds make the difference between being able to actually utilize the info you share vs. not being able to use it. Cheers!

@skylarbluetravel7422 4 года назад

That's really cool that you gave an honest review on how long it took you, the skill level and that if someone is motivated, they'll find good solutions. I'm doing mine tomorrow, so this helps give me a better idea of timing. Really appreciate that

@1monagale 3 года назад

Learning so much from these videos! I am glad I am not the only one that has to take yet-another trip to the hardware store! Thanks!

@flybyairplane3528 5 лет назад

SEVEN, hello,,I watched your installation, of your fan, and I NEVER LOST FAITH IN IT NOT LEAKING,,,,, Attention detail, Cheers From NJ🇺🇸🇺🇸🇺🇸

@ArcticNorthAdventures 5 месяцев назад

Had been watching your videos years ago when I did the Vanbuild for my Tiny Van Mitsubishi L300 now I finally got myself a sprinter and have to do all over again 🙈 even better that you got the same car and pretty good solution, but I might not be able to get the same things here inside the Arctic Polar Circle in Northern Norway where you are located.

@sillingworth4 4 года назад

We installed our max air roof fan today. We had watched your video at least 3 times and we knew what to expect at every step It came out nearly perfectly and we are hopeful that we pass the water test once our sealants cure Keep on doing what you do we appreciate it and hope to meet you on the road someday Two questions we had for you. 1.How and where did you connect your fan to power? 2. Have you thought about a make up air to allow fresh air into the Van when in exhaust mode?

@seven_o_savage 4 года назад

Woooop! so stoked to hear this.

@snoman1999 5 лет назад

I just stumbled on yr Van build videos, and I'm liking them a lot mate 👍🏼 Working my way through them right now as I'm doing my own project 🚐💨🇫🇷

@seven_o_savage 5 лет назад

That is awesome! Holler if you have any questions

@snoman1999 5 лет назад

@@seven_o_savage - when connecting the fan to the roof flange, did the 4 x holes line up easily ? I had a spot of bother with mine 🤔

@mbk1251 3 года назад

Drilling = centre punch ( in this case you had a guideline template siround to go by ) pilot hole ,1st. Then use drill undersized for self toppings or same diameter for ba threaded or for clearance tiny bit bigger Test run on scrap metal first for drill size and screw grab effectiveness It's bit measures 3 time cut once B.A bolt washers and nuts would been more right for this job Loved your in cabinet aluminium and slide out bed build Keep videos coming

@bretthawton 5 лет назад

"The ol' penetration test"... works every time.

@AnkeneyVanBuilds 3 года назад

Cutting into a van is, in reality, pretty easy. But it never gets less stressful!! Good job on your install!! I just filmed a "How to" video also!

@petermontez9686 5 лет назад

Good work Dude!

@ShakespeareCafe Год назад

The CRL 15x30 sunroof is much more versatile. It extends up a few inches for ventilation, lets in light. You can also remove the glass and climb up on your roof. I aim my DeWalt fan up towards it. The poor man’s maxxair. The maxxair draws on your battery and though it might not be a lot it’s still draining your battery.

@douglasharley2440 5 лет назад

super info and presentation!...much thanks.

@icantfindausernamehe 5 лет назад

You can cut down on drying times by using less glue. Depends how much belt and braces you want.

@douglasharley2440 5 лет назад

you could practice on the part of the roof that you are cutting out, that way it's the same material/thickness/etc. just make a few lines and go-to-town!

@MannyWC 2 года назад

oh good idea!

@MannyWC 2 года назад

drill a middle hole and jig from the center to the corner (s) to get the feel!

@rowangratz6146 4 года назад

Super clean ! Nice detail work

@Seb.Marquet 2 года назад

First Thank you so much for the videos, you share precious information that help me every step of the way. One question: How many self leveling tube will I need for the project?

@romanticscents 3 года назад

Very very good. I'm binge watch all your videos.new subbie

@evenlarsen6098 5 лет назад

Congrats on your sprinter. Going to follow your van build. Sub. No:39 :-)

@seven_o_savage 5 лет назад

Many thanks Even! You and the other 38 subs have given me so much motivation :)

@CianArranEoin 3 года назад

love the honesty! Good job!!!

@skipdippity 5 лет назад

Nice video man....keep them coming..!

@stevenrichardson7820 5 лет назад

Keep this up!

@seven_o_savage 5 лет назад

Thanks Steven! Will do.

@TSnowy23 3 года назад

Hey Seven, I think a Dremel would have been much easier than a jigsaw, especially if you had an L-Bracket of wood to protect areas you dont want to cut. Dremels can cause a lot of sparks especially on metal but IMO won't suddenly zig zag like a jigsaw might. What do you think? A better option right? Dremels can get hot and have motor burnout so when cutting metal I find it best to work for small amount of time and let cool, then work again, a cycle of 1 or 2 min working with 10 or 15 min cooldown.

@davidmarshall6124 3 года назад

No, a jigsaw is the correct tool for this job. A dremel is not the correct tool. If it is overheating, you are using it beyond its capabilities. Get a jigsaw with the correct blade for your application and use it. If you don't want it to wander, you can make a jig for saw to follow.

@ConnorFXDB 4 года назад

awesome video! Great thoughts after thank you for being straightforward regarding the experience. My fan is on order and excited to install! Curious where you ran the wiring, was trying to browse the video and cannot see em which has me thinking you tucked em away -- did you run them through the van frame beams? Thank you for the video!

@seven_o_savage 4 года назад

I have some space between the insulation and ceiling where I routed all of the wiring that crosses the van. It’s basically attached to one of the ceiling beams.

@ConnorFXDB 4 года назад

Seven O Savage awesome! Thank you for the reply. Cheers!

@travelinghippies6743 2 года назад

@@seven_o_savage so where did you run it to get power to it?

@benjaminlandheer1 4 года назад

Do you need two fans? How do you get good circulation with only air coming in?

@brownbunny2513 4 года назад

You are a very kool young man, job very well done. 👍

@charlesmoman 4 года назад

I do videos about my Runaway mini camper and other Runaways and a few product reviews. I have over 1.25 million views so far. I am about to install the same MaxxAir on my 6x8 Runaway Camper RangeRunner and I found this very helpful. I know you do not need a life coach, but . . . seriously consider NOT having music run in the background when you are talking. It simply is not needed and is distracting and a little annoying. I learned that lesson long ago. Anyway . . . just a suggestion and it is not a salvation issue! Be safe.

@josephwhitty7245 5 лет назад

Enjoying your videos. How did you wire up the maxxair fan? Thanks

@seven_o_savage 5 лет назад

Thanks Joseph! Check out my electrical wiring video where I show it getting wired up

@El_Adelantado 5 лет назад

Nice video. Thanks.

@Conservator. 4 года назад

Are u sure u used enough of that sealant?

@Namdor2012 4 года назад

Dood you get 10/10 for enthusiasm and enjoy your vids, but you really need to under-mount a wood frame interior side so it clamps and firms up the roof.. Roof is thin and flexes too much, and no need for the mess use Sikaflex 512 on the screw heads and a bead around the mount..I Advise people to have a good look through Max install vids, they ain't cheap so avoid the grief...

@lookatubex 4 года назад

Do you cover the wiring and fuses at any point? You've got how to cut the hole, mount it and all that but nothing about wiring the fan.

@carolmaplesden916 4 года назад

I've noticed that on pretty much all these diy vids I think when I get mine put in,in about a week,im going to have it wired to one of those plugs for the cigarette lighter and use a die hard jump starter to run it. I found those little batteries that gose in those at home depot for arouy 40 bucks so I can have extras Hope that helps

@lookatubex 4 года назад

@@carolmaplesden916 That's an interesting way to do it, but in trying to attach it to a solar system - like they have done.. Except that part is left out.. You know the part that makes it a fan and not just a hole in the roof lol.

@carolmaplesden916 4 года назад

@@lookatubex yea 😀 I'm looking for the vid that shows how to do it But there's a way to change the battery pack with solar

@stanleytolle416 Год назад

My question is with the liner on the inside. Like what is the trim suppose to mount to. Like it looks like you are putting screws up through your roof? Like my liner is not anything you can screw the trim into. It's just this foam stuff. So how do you have a place for the lower trim piece to screw into?

@H2Dwoat 4 года назад

Hi, nice and thorough instructional video thanks 👍. Just a quick question, do the modifications you are making to the van affect the warranty?

@bthemedia 4 года назад

How is the electrical setup connected?

@glenstamate7990 Год назад

When you built out your van,did you leave that plastic shroud over the wires in the upper corner? Also I am not sure what those styrofoam things are near the cab in the corners

@Favianification 4 года назад

What’s the link for the bracket (gasket), the one you have on here is for different brackets... Awesome videos btw!

@seven_o_savage 4 года назад

Thanks Favian, just updated this to the correct link!

@peterchilvers129 Год назад

What are you doing to stop light coming in? Mine is very bright in the morning. What are you doing for noise insulation? Thank you

@frontlinemedia4270 5 лет назад

That adhesive works good, but too expensive. I recommend a different brand

@glenirani5694 3 года назад

Thanks for the video. Couple questions: 1. Do you know if the crew fan 2021 has a prewire to the OEM fan option location? If so, I imagine it has it's own fuse on the main fuse panel? I only plan to have a portable fridge, this fan and lighting (outside and inside) so don't think I'll be installing a full aux power system.

@jakebayar 5 лет назад

Do you have Instagram or something else where you're posting photos of your van build?

@seven_o_savage 5 лет назад

Yo J.B. I just created one thanks to your comment! instagram.com/seven_osavage/

@MannyWC 2 года назад

So no wood framing first?

@daveacosta9803 4 года назад

Yo, thanks for the vids, Question...where did you order the base rubber mount bracket for maxxair fan?? I can’t seem to find it ✌🏽

@reini1880 Год назад

Hi were did you buy the black adapter frame?

@pinay56 4 года назад

Why drill pilot holes, if you used self tapping screws you'd get rid of the pre-drilling and have the screws drilled into the cover.....

@Conservator. 4 года назад

Drilling in 2 corners would have been sufficient 😉

@Namdor2012 4 года назад

Sometimes it's best, turning the jigsaw can be tricky and drilling 4 holes gives a clean corner as the fan has rounded corners..

@barthanes1 5 лет назад

It would probably work better to use an angle grinder and a cut-off wheel to cut the hole in the sheet metal.

@spongebobsquaretits 4 года назад

it was perfect , how could an angle grinder do it better

@iracoyne4869 2 года назад

is the fan battery powered?

@jamescolter6597 4 года назад

Why doesn’t anyone show the wiring up of fans?

@carolmaplesden916 4 года назад

Splice the wording to a cigarette type plug then you can use like a jacket or they have those little batteries in the lighting department at home depot or you can use like one of those battery jump starters to plug into. You can get Those little solar fold up panels to charge those little batteries

@peterdods425 3 года назад

I have similar windows in my Revel. They work great...that said they do rattle a lot when driving. Do you find that these do that too? I think it's the black out/screen part that is doing the rattling. When I have them up, it is mostly not noticeable.

@seven_o_savage 3 года назад

Windows or fans?

@peterdods425 3 года назад

@@seven_o_savage whoa that's weird. I thought I made this comment under your new build for the new windows you were installing. I don't know how it ended up in the solar video.

@peterdods425 3 года назад

@@seven_o_savage Any idea on the teeth per inch on that blade you were using on the Jig Saw? 24tpi? 36tpi?

@rvvanlife 2 года назад

Is there mounting bracket contact # ?. Or business name? I have an older van.

@mixedchickULike 4 года назад

What should I expect to pay a shop to do this for me?

@bill813 4 года назад

Out of curiosity, how much dicor did you use per fan?

@bryanchuchta361 4 года назад

does the fan act like air conditioning? or just a breeze? is it sometimes to hot in the van or is that nice and cool?

@seven_o_savage 4 года назад

It gets hot. I’d recommend an AC unit if you can swing it

@bryanchuchta361 4 года назад

@@seven_o_savage Thanks!

@joenovak9366 2 года назад

Can you tell me if you have had any issues with the MaxxAir fan? The reviews on Amazon have a lot of negative comments about the remote not working and customer service that sucks? Can anyone else comment B-4 I spend $350.00 bucks!

@CaffeineJogger 4 года назад

nothing is up. Hei Seven, thank you for the Clip. One suggestion is that the music. I want to listen to you not some random tunes. thumbs up though

@MrGarda42 5 лет назад

5:29 what tape is that?

@urbanarkoverland 5 лет назад

Butyl tape pal. Caravan shops sell it. It never goes hard. Stays nice and soft 👍

@MrGarda42 5 лет назад

UrbanARK overland awesome. Thank you. Btw have you heard of SikaLastomer 710. A butly glue of some sort? You reckon it would substitute the tape?

@urbanarkoverland 5 лет назад

Just googled it. Yeah that stuff looks great. Description says above and below water level. Which means it’s the real deal. 👍🏻

@MrGarda42 5 лет назад

UrbanARK overland I'm hoping we find someone who's actually had some experience with this 710. Would love to know how it performs in real life as a replacement, cause the tape might just be easier to use since you can mould it.

@urbanarkoverland 5 лет назад

Yeah fair point. Most things in a tube behave pretty much the same. Like caulk/silicone. I’m a plumber by trade so nothing in a tube phases me. Make sure all surfaces are clean and dry. Apply liberally. And clean excess. Hope you find your answers. Good luck 👍🏻