How to Install a Open/Locked Closed Indicator Major Manufacturing Router Jig and Step Bit Options

Подписаться 39 тыс.

Просмотров 13 тыс.

50% 1

How to Install a Open/Locked Closed Indicator Major Manufacturing Router Jig and Step Bit Options.
WARNING: DO NOT TRY THIS AT HOME!
Please Click The Subscribe Button Below And Share Video With G+, Facebook, Twitter and all Your Favorite Social Media! DO NOT TRY THIS AT HOME
Comments and questions are encouraged but please be respectful.
Visit wayneslockshop.com/ For More tips and tricks for the Locksmith Industry
tricountylocksmithservice.com/
All views and opinions are the alleged interaction with any product shown and not a fact stated by Wayne Winton and or Tri County Locksmith Service. The information shown in any video is 100% opinion of Wayne Winton and protected by the 1st amendment, the freedom of speech. Some products may be provided by the company being reviewed and others are purchased independently by Wayne Winton, Tri County Locksmith Service. Either way it does not reflect the content of the review. All products are given a fair equal chance to perform. All videos are property of Wayne Winton and all rights are reserved. If you would like to post any video please contact Wayne Winton at: Tricountylocksmithservice@gmail.com for permission.
Disclaimer: Do not try this at home! Any content seen here is for entertainment only! Do Not try anything seen here yourself or there may be danger of bodily harm or legal consequences for your actions! Any illegal activity is prohibited and Wayne Winton and or Tri County Locksmith Service are not responsible for your actions!
Wayne Winton, © 2017. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Wayne Winton. Please note that Wayne Winton, Tri County Locksmith Service does not state any confirmed facts only personal opinions. I am not directly affiliated with any of the vendors or manufacturers in this video. Wayne Winton, Tri County Locksmith Service is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the Wayne Winton, Tri County Locksmith Service film series broadcast on RU-vid is intended for entertainment purposes only.
Tri County Locksmith Service
1338 Grand Ave
Glenwood Springs
Colorado
81601
970-945-5625 970-963-5625 970-922-5625
Locksmiths United
#LocksmithsUnited
#Locksmithreviews
Locksmith Request
Fast, Friendly, Professional Service.
Locks, Locksmith, Locksmiths,
Lock Repair, Lock Re Key,
Home, Office, Business,
Panic Hardware, Door Closers,
Safes Opened, Safe Repair,
Safe & Vault Service,
Lockouts, 24 Hour Service
Aspen Locksmith, Snowmass Locksmith,
Basalt Locksmith, Carbondale locksmith,

Опубликовано:

3 авг 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@moki7685 3 месяца назад

Its restarted that there is a building code that requires a sign to tell someone a door is locked. Great job on the video. Thank you for taking the time to make it.

@pmlarocque 6 лет назад

Beautiful install on both methods! Those jigs are worth their weight in gold when you have a bunch of these to do!

@waynewinton 6 лет назад

Yes

@archangelshiro 3 года назад

I’m a young locksmith and I found this video to make sure I could do it myself before quoting to a customer. Super short and to-the-point video, thanks for not wasting time with a lot of talking!! After seeing it done I know I can do it myself, thanks so much!

@waynewinton Год назад

Glad it helped

@SUDSY0 Год назад

Good video showing how to work on storefront. They are few and far between. Thank you!

@RookieLock 6 лет назад

Nice filming! thanks for that Wayne!

@waynewinton 6 лет назад

No Problem!

@matthewellis3004 11 месяцев назад

Thanks for the video. Question: are you able to add a deadbolt on an aluminum storefront door like this that currently has a keyed lock lever exterior, panic bar interior and an electronic strike latch connected to a wireless key fob / card key access? There are no vertical rods that’ would get in the way of the deadbolt...I’ve just never attempted to retro fit some deadbolts(keyed cylinder style) like what I’m describing before. Any one know about this? Thanks again

@HighSpeedNoDrag 6 лет назад

Sweet installation.

@waynewinton 6 лет назад

THX

@omerdamari5178 7 месяцев назад

Where did you purchase the bit for the router? All I can find is for wood

@bladirosario 4 года назад

Hey ,where can I buy that jig?

@acaciadreamsmy Год назад

what jig brand is that? is it the mould replaceable with different type of lock? how much does it cost for the lock jig?

@aaronmeyerink7601 4 года назад

I know its late for when you posted the video, but what kind of router bit is that? I haven't seen to many router bits for Aluminum. Am I just not looking in the right places? Do you have any links for such bits? This would be SUPER helpful. I am in Hospitality and we install interfaced panic bars that often require a lot of weird cuts that look very achievable with a router. Thanks for the help.

@waynewinton Год назад

www.majormfg.com/pc-121-31-single-flute-14-down-shear-router-bit.aspx

@Jay_Tovennn 5 лет назад

Lucas as a lubricant? Im going to have to give that a try

@waynewinton Год назад

Edge gel is preferred, but yes this worked

@orestesbecerra9502 Год назад

On which side of the door am I supposed to install the indicator?

@therocketman321 6 лет назад

I've been tempted to buy one of those jigs for storefront doors. But it's a pretty penny lol

@waynewinton 6 лет назад

Therocketman321 they are well worth the investment

@waynewinton 6 лет назад

It's well worth it!

@MYKEYSAUTOMOTIVE 4 года назад

Where can i buy that template??

@waynewinton Год назад

Major manufacturing! www.majormfg.com/pc-121-31-single-flute-14-down-shear-router-bit.aspx

@ken_9359 2 года назад

I know this video is pretty old, but would you know why an indicator would show the opposite of what the lock is doing? I was on a job with a locksmith who wanted to put the indicator device on the door. But I found out that it didn't work the way it was supposed to. So I was thinking the lock was put on wrong or it may have been something else wrong. I don't know, maybe you ran into this situation.

@jwillwilliams885 2 года назад

Usually when one of the the plastic clips has broken the indicator will fall down and read closed when open… then when you lock it… it will pick it up on the top clip/shelf and show open when locked. Happens all the time…usually the bottom shelf will break from the mortise no longer being screwed in and being held by the locks or the indicator… or I suppose they could turn it too far consistently and eventually break it… he put a nice one on but typically they are very cheap and the plastic will break with just a few pounds of pressure… so yeah one of the two plastic lift shelves snapped off.

@andypuckett5875 2 года назад

Mine is “upside” down as well . In your video the lock indicator shows locked when in the down position, but the indicator I have shows open in the down position . Thinking I just had the wrong indicator?

@waynewinton Год назад

Something was put together backwards 🤔