How to Install a Projector Screen (90" Motorised) with Brackets to Avoid a TV

Просмотров 220 тыс.

% 984

I'm installing a motorised projector screen in this video - this is a 90 inch screen. At around 10kg I didn't trust hanging it from the ceiling as it just attaches to a single screw on each side, plus it needed to sit in front of the TV screen. Wall mounting with some simple off-set brackets gives a VERY strong fixing. In reality the ceiling would *probably* have been absolutely fine but I'll sleep better with it installed like this. I deliberately haven't shown anything about installing the cabling / power to the screen as there's so many ways of doing this depending on your wall construction etc. This was dot & dab and easy to run the cable behind the plasterboard. Enjoy and don't forget to Subscribe!
Read the full article here:
gosforthhandyman.com/installing-a-motorised-projector-screen/
Here's some affiliate links to products I use or would consider using - read more about affiliate links at the bottom of this description:
BenQ W1050 Projector: gosforthhandyman.com/uk-links/benq-projector (UK)
Luxburg 90" gosforthhandyman.com/uk-links/luxburg-90in-screen (UK)
BenQ HT2050A Projector: gosforthhandyman.com/us-links/benq-2050-projector (US)
Homegear 100" Motorized Projector Screen: gosforthhandyman.com/us-links/homegear-100in-screen (US)
Join the Member Zone for extra stuff:
members.gosforthhandyman.com
Buy locally sourced T-shirts and other lovely stuff from our little shop:
gosforthhandyman.com/shop/
Help me let you know about new vids - subscribe to my free newsletter here:
gosforthhandyman.com
TOOLS & PRODUCTS I USE: gosforthhandyman.com/products-i-use
INSTA: gosforthhandyman
I sometimes use affiliate links - these don’t cost you a penny and help to keep this channel going. Read more about affiliate links here - the fairest way of funding the internet: gosforthhandyman.com/affiliate-links/ - thanks so much for your awesome support!
All content on this channel is exclusively owned by MacLellan Creative Limited. Copyright (c) 2021. All rights reserved.
#Projector #DIY #HomeImprovement

Хобби

Опубликовано:

21 апр 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@GosforthHandyman 6 лет назад

Here's a similar 90" screen if you're in the UK: amzn.to/2K8eflF This is a similar 100" one if you're in the US: amzn.to/2lr1c0p (affiliate links) And here's the full article to go with this video: gosforthhandyman.com/2017/04/installing-a-motorised-projector-screen/

@wilsonganks 5 лет назад

Gosforth Handyman hey u got a question for you. I am considering an install for projector screen but needs an offset of approx 20cm from the wall, yes to avoid TV. The only issue I have is that I also have a ceiling fan which if I install the projection screen, the end of the fan blade will be approx 4 feet away. I am not worried about it hitting the fan for such distance. My worry is that the wind from the fan affecting the sturdiness of he screen causing wobble whenever I watch movie. From your experience, do you think it will cause a problem?

@NeptuneNoire 5 лет назад

Wow, this whole time I was thinking of where to move my TV, and you freaking solved it. Thanks so much!

@Ben831 Год назад

Brotha!!!!!!!!!!!!!!!!!!!!!!!!!!!!! you are the man!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@duke1977 4 года назад

U just gave inspiration move into a knew home that's a pain in the butt for home theater setup

@AhmedKhan-lv9li 2 года назад

Excellent video. Thanks so much for sharing. The only thing I'll do differently is paint the brackets before installing. Leave the touch up only after the install. Thanks again 👍

@shaunbaileyuk 5 лет назад

Very good video. Your solution is nice and neat. Ps the music is great.

@jimmynx1 4 года назад

I installed a 150 inch with 3 floating brackets in the ceiling. Some screws hit the stud, some I have to use the dry wall plastic thingy. So far it works but still don’t feel easy. Will have to do similar ideas to mount it on the wall with space to avoid the TV. Thx for the idea.

@victordavis8344 7 лет назад

Great video, nice touch to include the mistake as well. We all make them, just not too often.

@ishanperusinghe 2 года назад

This worked out great for me .

@rafawojcikiewicz1663 4 года назад

Hi. Can you provide the dimensions of these brackets? Board thickness? and what materials did you use? Greetings from Poland

@drewmorgan4080 2 года назад

where did you get the power from? How does the motor operate if no electrical is drilled. thanks

@RoshanRahim1992 3 года назад

Hi, Thanks for the informative Video. Can you please tell me where I can find the v-shaped mounting brackets shown in the video?

@housbinpharteen7445 4 года назад

did you just tap into the drywall for the screen or did you hit a stud?

@rimmerd9908 4 года назад

It looks like he uses a stud finder in the video. I have one but not the same model. Handy but rarely that accurate..

@housbinpharteen7445 4 года назад

@@rimmerd9908 my screen did not hit a stud on both ends so what i did was put a piece of wood to hit both studs then put my bracket on the wood, now i have room to put any size screen. wish i can put photo here..

@rimmerd9908 4 года назад

@@housbinpharteen7445 I get it! I used to use the old 'Tap the Wall with Something Hard" method which usually worked. My stud finder is mainly for electricity which it does okay. It's good to know the stud distance on each wall as it's likely that will run as a measurement throughout the property.. Cheers for the video!

@housbinpharteen7445 4 года назад

that is a 90" screen , i just got a 106" and love it , mind you now these tv's are getting up there also with 86" screens but @ just over 3k as i got both projector and screen for $1100

@aabo2 4 года назад

brand

@housbinpharteen7445 4 года назад

@@aabo2 epson 2150 , its 1080p but its Awesome

@kayodefashola9226 2 года назад

Do you install it against a plaster wall?

@artfullsmudge4957 5 лет назад

Glad I came past this, I just bought the same screen but manual, would this method work for 120 inch? Also is it possible to extend it out 25 mm from wall.

@nicholasmichael9452 6 месяцев назад

Hi, How did you adjust the stop positions? I have this blind and the manual is terrible.

@GosforthHandyman 5 месяцев назад

There's tiny adjuster pots on the back of the unit. 👍

@nicholasmichael9452 5 месяцев назад

@@GosforthHandyman Thank you. I found them with the help of a tiny camera. They are very well hidden when it is up against the wall.

@r.sneider481 4 года назад

do you have any plans for the monting brakets you built from wood?

@garrettdodson6110 5 лет назад

Good job. Great concealment of the power cord. Just with the bottom of the screen wasn’t curled up like that so bad

@OtisKopp 7 месяцев назад

The bottom of the screen really bothered me too. Did it ever straighten out?

@jrorozco29 4 года назад

Thanks great idea 👍👍

@alireza2419 5 лет назад

pro installing

@martinlutherkingjr.5582 4 года назад

Can you set a custom stop point for where the screen stops extending down or do you have to manual stop it if you don’t want to it to extend fully? Does it support IR universal remotes?