How to Install a Radiator with Wickes

Подписаться 82 тыс.

Просмотров 680 тыс.

50% 1

We show you all the steps you need to install your radiator to maximise your heating output and efficiency.
Subscribe to the Wickes RU-vid channel here: bit.ly/1WHJIIr
For more Wickes videos click here: PLAYLIST URL
When your radiator needs replacing with a new one this tutorial can help you make sure thew job goes correctly. This tutorial is for a heating system supplied by a header tank which is usually found in the loft. It's good to make sure the header tank is topped up with corrosion inhibiter.
If you have any decorating planned, once the radiator is off the wall, this is the perfect opportunity to do so.
Safety Tips
Radiators are heavy. Be sure to use lifting assistance if needed.
Wearing suitable clothing including knee pads.
When drilling be sure to use protective eye-wear.
Find out more about how to replace a radiator: www.wickes.co.u...
Subscribe to the Wickes RU-vid channel here: bit.ly/1WHJIIr
In addition to our video, we recommend you read our 'How To Guide - How to create storage space'. Use this guide to find out how to choose and calculate your materials, tools and safety equipment. www.wickes.co.u....
For more tips and general advice on how to do it yourself from Wickes, you can visit;
Wickes Website: www.wickes.co.uk/
Wickes Facebook: / wickes.co.uk
Wickes Twitter: / wickes
Wickes Google+: plus.google.co....
Wickes RU-vid channel: / wickesvideo

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@genesisrobles3426 Год назад

MUY buena calidad, el texto imagenes. ru-vid.comUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO Un manuel muy completo y trabajado. Resulta muy práctico. Para principiantes y profesionales. Lo recomiendo

@jameslowman2088 6 лет назад

Some useful advice. I learnt that the long holes in the brackets are to help you get the height of the radiator in line with the valves as you can slide the brackets up and down. Then when it is correct, fix screws through the round holes. Thank you.

@razzyrascal7961 3 года назад

Thanks James, this was literally what I came here to see and he didnt explain it at all!

@chubbyBunny94 Год назад

Just had my offer accepted on first house. Subbed, Let’s gooooo

@D0nkles Год назад

good luck mate, was same boat and I was gravely unprepared for radiators and heating.

@alanjohnson8417 Год назад

Always have lots of rags at hand and spread them beneath the radiator before lifting it off. Don't use your best glass bowl to collect water. You don't need that much PTFE tape. If you wrap it around three times and tighten properly, that is sufficient.

@davidpotts1778 Месяц назад

Wrong!! You give it 15 tight wraps

@MM0SDK 10 лет назад

I don't understand why people are saying the video shows the PTFE being wrapped in the wrong direction, not wrapped clockwise with the same direction as the nut tightening rotation. Are the valves reverse threaded - anti-clockwise? I've always wrapped PTFE in the same direction as I would be tightening the nut, to stop it unravelling. Am I right?

@MM0SDK 9 лет назад

lifeshort lol thanks

@siamscot 7 лет назад

Mark Bartlett i

@tombartram7384 Год назад

Top tip. For screwing rad valves into the main body of the rad don't go out and buy a half inch plumbing-specific hex key. It sux buying a tool you'll never need again. Simply grip the shaft of a m8 bolt in your mole grips and use the bolt head. Always ptfe this thread before installing the rad as a precaution.

@Bibg867 2 года назад

The positioning of the brackets are not explained clearly

@bluelightalarm 3 года назад

They hid the mess he made of draining that radiator! Water went down in the gap between the wall and the floor! Would have made much more sense to put a plastic sheet down first and a towel to catch any water that missed the bowl!

@Wendybellrings 8 лет назад

You said put corrosion inhibitor in the header tank - that's fine but what about a sealed system. ? In through the top of the rad with the cap removed with a funnel and tube, cap re-fitted then bleed the system.

@kathielowe4470 7 лет назад

Robert Warner

@Professional_Youtube_Commenter 3 года назад

LOL, pay a plumber. You're asking for specific questions and if you dont know then you should just hire a professional to do this.

@oginsights5340 2 года назад

Where can modern radiators be bought? I don't see them at large box hardware stores.

@marklimbrick Год назад

As soon as you touch the lock valves on old radiator - they will start leaking badly. Now PTFE tape quickly wrapped around unwound thread on adjusting but will seal, its only temporary. If it started leaking again you could come home to a big wet mess. The rubber seals must lose flexibility over time. Expect it and have PTFE tape handy.

@70nads 10 лет назад

This video was a great help.

@enensis 6 лет назад

The most crucial part of measuring is not explained enough lol

@ashwinpatelmpharm 10 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WAx0Tnz1hEk.htmlsi=25Fu2iROq8HJPdma this video explains the measuring in a bit more detail

@SamHughes-gw6ym 7 месяцев назад

Which part? I thought measuring is pretty self explanatory if you know how to measure stuff

@swedensy 6 лет назад

This is easy How about input and output on one side radiators?

@wetconcrete 11 лет назад

You only get given one pair of eyes - ALWAYS wear eye protection when drilling.

@liamtaylor5122 3 года назад

7 years later and comment still going strong

@philbell5705 Год назад

Safety squint will do 👍

@ericreckless541 7 лет назад

I dont understand the measuring sequence he does not explain this very clearly.

@sgtjenko 7 лет назад

Neither do I and that was the whole point of me watching the video

@nlomas 6 лет назад

How do I know if I have a pressured system?

@Professional_Youtube_Commenter 3 года назад

pressurised system = combi boiler.

@2icelollys1goat 8 месяцев назад

If you're asking that.... then you absolutely need a plumber!

@Kelsdoggy 11 лет назад

Very useful thanks

@zachx01 9 лет назад

OK, I have a new wickes rad now on the wall, it did not come with tail pieces and I cant find either tail piece or tail key on the wickes site, suggestions please.

@nasirpjr7332 6 лет назад

Very nice tanks

@fablan3308 2 года назад

Which side do you put air release valve

@alanjohnson8417 Год назад

You mean the bleed valve? If your radiator is absolutely level it doesn't really matter. If one end of the radiator is higher than the other (spirit level) put the bleed valve at the higher end.

@czkimi2009 10 лет назад

wow the QUINN!

@amrhassan3707 4 года назад

WHAT,S THE KIND OF RADIATOR PIPE

@faroyoussef1757 9 месяцев назад

Not informative in terms of measurements . We expected to know the measurements

@FunkSoulClassic89 10 лет назад

how much ptfe taper did he use half the roll wasn't it

@Wendybellrings 8 лет назад

+FunkSoulClassic89 you need 6-7 turns on the tail pieces

@abscomm 6 лет назад

2:35 Tghis guy has never used PTFE tape before. He is a joke!

@holeepoo5496 4 года назад

Hahaha rookie

@iknoukno6250 3 года назад

🤣🤣🤣🤣

@Professional_Youtube_Commenter 3 года назад

What? he's putting the ptfe in the correct directions, whats wrong with that?

@abscomm 3 года назад

@@Professional_RU-vid_Commenter If you wrap it in the opposite direction that the parts move as you tighten then there is a chance that the tape will bunch up and cause a small leak either immediately or after some time. Therefore you could get a call back. Is that the sort of reputation you want as a tradesman?

@Professional_Youtube_Commenter 3 года назад

@@abscomm i have no idea what you mean. Are union joints treaded in reverse or something? IIRC they are not. The way he's wrapped it, the end is facing away from the direction it will be treaded in. I am pretty sure you are dead wrong on this.

@barrycawley6501 6 лет назад

Screwfix is better

@pinksandvibes3049 Год назад

Hope they will not use my cooking bowl

@tomstyle89 10 лет назад

Ptfe tape **

@Bluezulu17 4 года назад

This vid has left me more confused than I was before watching

@JohnnyKarate44 3 года назад

That radiator is not level.

@Shane-lt8lh 9 месяцев назад

Worst video I ever seen

@gurmindersingh1424 6 лет назад

Yours old. Radiator is.

@bruskdersim1720 2 года назад

What was that all about. U didn’t tell us the most important part of the installation the measurements. What a joke.

@katrinasmith1987 2 года назад

woodwork project beginner .

@NotReallyBotheredAboutMyHandle Год назад

baba booey

@tomstyle89 10 лет назад

This guy doesn't have a clue what he's doing he's putting the order tape on wrong and you don't put ptfe tape on the bleeding valve or blank plate as they have a rubber seal wickes were did you get this guy lmao

@maandpaharris2887 9 лет назад

I hgffff

@Wendybellrings 8 лет назад

+tom smithy - he did put the ptfe tape on correctly - clockwise. He didn't put ptfe tape on the bleed valve and blanking plate which is correct - what were you watching ?