Тёмный

How to install a Ryzen CPU and its Wraith Stealth Cooler | AM4 socket | AMD 

Scotts PC
Подписаться 9 тыс.
Просмотров 258 тыс.
50% 1

We all had to start somewhere. For you folks who are getting ready and are researching on how to build your first gaming pc then this video is for you. How to install a Ryzen CPU and its Wraith Stealth Cooler.
-----------------------------------------------------------------
Scotts PC Amazon store front - amzn.to/43TFq9R
-----------------------------------------------------------------
**AMAZON AFFILITATE LINKS**
Ryzen 5 5600x - amzn.to/3wDyAox
Ryzen 7 5800x - amzn.to/3n5aC2o
Ryzen 9 5900x - amzn.to/3DjeiDa
Ryzen 9 5950x - amzn.to/31S5tCK
-----------------------------------------------------------------
My Apple Airpods Pro - amzn.to/3Aq9v2u
-----------------------------------------------------------------
Computer fans - 3 tips on how to determine airflow direction - intake vs exhaust - • Computer fans - 3 tips...
------------------------------------------------------------------
I didn't become MONETIZED without a little help! Here's a link to TubeBuddy free Software extension for RU-vid that will help you with your RU-vid channel tags and titles to help get more views! MUST HAVE for any RU-vidr trying to grow their channel. Tubebuddy has helped my channel get more than ONE MILLION VIEWS - www.tubebuddy....
----------------------------------------------------------------
Equipment I use (Amazon Affiliate Links)
Canon M50 - amzn.to/2Ksj5fK
Samsung USB-C to 3.5mm Headphone Jack Adapter - amzn.to/3pgLzHY
Neewer Ring Light Kit:18"/48cm - amzn.to/34Hs9UA
Samsung Electronics Galaxy Note 20 Ultra 5G - amzn.to/3ruVFa8
GoPro HERO8 Black - amzn.to/34M3TAR
Professional Grade Lavalier Lapel Microphone - amzn.to/3pmm9Zs
----------------------------------------------------------------------------
I use Amazon affiliate links I use to support this channel. If you click on them and buy something, I will earn a small commission. They do not cost you anything extra.

Опубликовано:

 

1 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 315   
@ScottsPC
@ScottsPC Год назад
I just installed the Ryzen 5950x. It's a Beast! CPU prices are dropping on the AM4 platform - amzn.to/3LQ6XRg
@Waffellover8656
@Waffellover8656 Год назад
This was a nightmare to install
@Pleasekillme12369
@Pleasekillme12369 2 месяца назад
How lol? Wait until you get into aoi coolers 😂
@omarashraf9056
@omarashraf9056 2 года назад
Very important note when installing the stock cpu fan: there is only one way to install it which is by applying pressure on the back plate of the mother board ( black metal plate found behind the motherboard) then start screwing and applying pressure starting from top right corner then bottom left and so on. Do not screw one screw at once try equally distribute it. thank me later 😉
@viroxin1260
@viroxin1260 2 года назад
Holy shit thank you so much. I was going crazy from not knowing why the screws wouldn't go in
@arksurvivaldevolved1382
@arksurvivaldevolved1382 2 года назад
I love you
@luneri9168
@luneri9168 2 года назад
You're the best dude lmao, I was wondering why only one side was not being able to be tightened
@sheenfromtf2
@sheenfromtf2 2 года назад
Thank you so much dude. This stumped me and my brother until we looked in the coments and saw yours. Real life saver thank you
@Philmore.
@Philmore. 2 года назад
@@viroxin1260 they have to sorta reach out to the holes
@beingofnatureshadow
@beingofnatureshadow 3 года назад
bless you most people skip over this and I was starting to worry that I was missing some baackplate screws- I just had to press a little harder so the screws would catch! thank ya!
@ScottsPC
@ScottsPC 3 года назад
Glad to hear the video helped some! Thanks for this comment and the sub! ⚡️ Good luck to you my friend! ⚡️
@dopeshi.7910
@dopeshi.7910 2 года назад
thanks man had the same problem i was worried for a second
@quakker2110
@quakker2110 2 года назад
Same
@gnt.no_1
@gnt.no_1 Год назад
welp im still stuck with the screws, im apllying pressure on them like crazy, they wont mo e a bit
@JamBread-ep7wr
@JamBread-ep7wr Год назад
​@@gnt.no_1I'm having the same issue, no idea on what to do
@ednallanos9331
@ednallanos9331 3 года назад
I’ve seen this process so many times for how many pc build I’ve seen and my coolers wasn’t going in until I noticed my motherboard backplate actually fell in the back of my case I was so worried but I just put it back in place and easy sailing from there
@ScottsPC
@ScottsPC 3 года назад
Live and Learn!!! Thanks for sharing!😎😂😂😎
@ednallanos9331
@ednallanos9331 3 года назад
Couldn’t agree more
@AdamTheCoop1
@AdamTheCoop1 3 месяца назад
I just ruined a cpu before watching this because every time I tried to seat the fan on my MOBO it would shift and the thermal paste dragged the cpu with it and now I have bent pins. FML.
@Owenbueno
@Owenbueno 3 месяца назад
Me too bro
@ngwoo
@ngwoo 2 года назад
The last time I built a PC it was with a third-generation Intel i5 CPU. Those stock coolers were absolutely garbage - crappy plastic pushpins that basically disintegrate themselves if you ever need to take the cooler off. These Ryzen coolers are a godsend compared to those, and I love that a backplate is standard hardware instead of something reserved for aftermarket coolers. Good stuff, and great guide.
@ScottsPC
@ScottsPC 2 года назад
Thanks for watching and thanks for the comment!
@ShortStoriesbyMatt
@ShortStoriesbyMatt 2 года назад
One of the most straightforward and informative installs. Thank you for the simplicity and explanation in terms we all can get. Bravo!
@Silver-nm2if
@Silver-nm2if 3 года назад
The cooler was so hard to screw down. I thought i was gonna break my motherboard
@ScottsPC
@ScottsPC 3 года назад
First time is always a little nerve racking! ⚡️ LOL... Good job! ⚡️
@Silver-nm2if
@Silver-nm2if 3 года назад
@@ScottsPC like i had to put alot of pressure. The screws didnt touch the standoffs. When i get to screw down one and move to the next, the one i recently screwed down just poped off. Sorry for bad english. Its not my first language.
@ScottsPC
@ScottsPC 3 года назад
Your English is just fine. Now your an expert at installing a cpu and cooler! ⚡️ Thanks for commenting and good luck to you! ⚡️
@ASSAILANT4X4
@ASSAILANT4X4 2 года назад
to the point, no bullshit no hee hee huu huu haa haa
@SWIRFTV
@SWIRFTV 3 года назад
you forgot to add in the title "because the real cooler hasn't arrived in the mail yet"
@ScottsPC
@ScottsPC 3 года назад
Hahahaha....you know it!!!!
@frehesh.4386
@frehesh.4386 3 года назад
Bruh wraith coolers arent that bad
@user-wj3eq7dz7u
@user-wj3eq7dz7u 3 года назад
@@frehesh.4386 Wraith stealth real shit.
@frehesh.4386
@frehesh.4386 3 года назад
@@user-wj3eq7dz7u no they are not loud and they get the job done and dont look bad. For a stock cooler its good but not ideal
@user-wj3eq7dz7u
@user-wj3eq7dz7u 3 года назад
@@frehesh.4386 Bruv I literally bought R5 3600 yesterday with a stock cooler and my temps hitting 91°c on 100% usage and 50-51 on idle.
@Kindhamster
@Kindhamster 3 года назад
I am gobsmacked that you only have 2000 subscribers. This video is clear, informative, and you're a very friendly and welcoming host. Thank you for this! You just earned another subscriber.
@ScottsPC
@ScottsPC 3 года назад
Thanks for the kind words and thanks for the sub! ⚡️ Good luck to you! ⚡️
@rays_433
@rays_433 2 года назад
Guys please help my screws of the fan won't install, it's in a perfect place the tip of it moves but the pointy tip won't move please help
@98Niicko89
@98Niicko89 3 года назад
Im building my first pc ever and im really excited, thanks for the tutorial, it helped a lot!
@ScottsPC
@ScottsPC 3 года назад
Good luck to you! ⚡️
@alexeddie2546
@alexeddie2546 2 года назад
I know this a one year old video, but is it possible to install a Ryzen 5 3600 onto the b350m bazooka is it compatible or not if so do I have to do a BIOS update.
@ScottsPC
@ScottsPC 2 года назад
I would go to pcpartpicker.com and enter your build to see if compatible for a second opinion... I don't know off the top of my head.
@worlore1651
@worlore1651 2 месяца назад
Yesterday I spent like an hour trying to put the damn thing in. The backplate wasn't even behind the motherboard. It fell off onto the table. I had to lean the entire tower on the cpu box at the backplate to keep the backplate up. Laying it on the table wouldnt work. It's the 5600x. The temps literally idle at 95 degrees C. I went to bed, wake up, turn computer off of sleep mode, immediately go into cote temp checker and it's still 95. If I open a game it's still right about 95. The pc is slow so it might actually be thermal throttling? Or it could be a bad sensor. The air also doesn't feel hot from the cpu.
@tdm3bros
@tdm3bros 2 года назад
BUT MY PC DOESNT TURN ON
@ScottsPC
@ScottsPC 3 года назад
Here's an updated version on how to install the hyper 212 black edition which includes the WIRE FAN CLIPS and the FAN SPLITTER to add a second fan - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AQ5FVvdDz1c.html
@ScottsPC
@ScottsPC 3 года назад
Check out how to install Cooler Masters Hyper 212 Black Edition - bit.ly/33mIEFv
@lolsz1
@lolsz1 2 года назад
building my own pc. the goddamn manual didnt help, this video did thanks!
@thekidsish8368
@thekidsish8368 3 года назад
Great upload mate! Sending support from Australia 🇭🇲
@ScottsPC
@ScottsPC 3 года назад
Much appreciated! ⚡️ Thanks for the support! ⚡️
@planetfabulous5833
@planetfabulous5833 2 года назад
Yummy beard!!!! I'm subscribing!
@grubbymitten276
@grubbymitten276 2 месяца назад
I hate this thing the spring things wond let the screws go down pls help someone
@areox4520
@areox4520 3 года назад
what did you do to hold in the backplate while you did it? just wondering whether i should get someone else to hold it in since mines in the case too
@ScottsPC
@ScottsPC 3 года назад
In this video I had the motherboard on top of the motherboard box so no issues. But yes, having a friend or family around always help when you need an extra set of hands when your in your tower. Good luck to you and thanks for the question!
@Hymandois
@Hymandois Год назад
Could the cpu possibly be damaged if I put too much pressure? I bought a ryzen and with it came this cooler but its nearly annoying to put the springlocked screws down
@justonkehr9050
@justonkehr9050 2 года назад
thank you so much! I was worried pressing down on the screws would be bad but this totally helped and it made me feel a bit better about my first build!
@lexidecimal9941
@lexidecimal9941 3 года назад
Thanks for this. Super simple fast and helpful. Really wanted to hear about how tight to make the screws... noted can't overnighten. 👊😓👍
@ScottsPC
@ScottsPC 3 года назад
Thanks and good luck to you!
@waylanitis
@waylanitis Год назад
Hi what do I do if I can't remove the two plastic clips? The screws are far too tight and don't budge, and I'm afraid of applying more pressure in case I damage the motherboard
@indigo6920
@indigo6920 3 года назад
I’m building my first pc while typing this. I hope it helps!
@ScottsPC
@ScottsPC 3 года назад
Good luck to you! ⚡️
@Mooooorty
@Mooooorty 3 года назад
Same and installing this fan is a pain I feel like I’m gonna break something it’s so annoying
@bengale7054
@bengale7054 3 года назад
I have an issue. There are springs on my screws that don’t let them go down and they stay up so I can’t screw in my Amd stock cooler. I bought a 5 3500X
@perfectoryt9118
@perfectoryt9118 3 года назад
same issue
@mirphus7413
@mirphus7413 3 года назад
The cooler i just got with my cpu had springs on it as well and it looked like the screws wouldn't go down all you gotta do is just screw them a little once you got the cooler in place and it should stick it worked for me
@haisulisukka
@haisulisukka 3 года назад
I got this fixed by just pressing really hard
@SirJohnsonP
@SirJohnsonP 3 года назад
Not only that the springs would crack while screwing like something is cracking , I was afraid that something doesnt break
@garzins
@garzins 2 года назад
Hello I have a question. If the cooler comes with pre applied thermal paste (like the stock cooler) does that still mean we have to find thermal paste from a store and apply it?
@ScottsPC
@ScottsPC 2 года назад
No.... But it's always a good idea to have some spare thermal paste if you make a mistake... Good luck to you! ⚡️
@garzins
@garzins 2 года назад
@@ScottsPC Thanks! My final part comes in on the 16th so I’m excited but nervous at the same time 😅
@ScottsPC
@ScottsPC 2 года назад
@@garzins take your time and watch as many tutorials as possible... You got this!
@garzins
@garzins 2 года назад
@@ScottsPC Thank you for the motivation on this :,) everyone else has been telling me it’ll be a waste of money but your the first person to encourage me
@DexDZNS
@DexDZNS 2 года назад
The screws don’t go in at all what am I suppose to do
@Daniyoyo
@Daniyoyo 2 года назад
Pc repair / install instructor!
@Jarthalamew
@Jarthalamew 3 года назад
Thanks man, I just installed my stock cooler and was worried I did it wrong.
@n1ckname534
@n1ckname534 2 года назад
Im having a trouble right now my cpu cooler doesnt go down it has springs
@martinfilipov740
@martinfilipov740 2 года назад
hey man, i have recently installed a 5600x on my pc and installing the cooler was a nightmare. i have installed cpus before and it was way easier. this one seemed like the screws are just a fraction shorter or something because i had to put a lot of force to get the backplate and cooler together in order to screw them together. does someone has any thoughts and/or similar experience?
@haz7039
@haz7039 2 года назад
Yeah I can’t seem to be able to make them connect
@martinfilipov740
@martinfilipov740 2 года назад
@@haz7039 it does take a bit of force, but i believe it should be less than the one that i put in for example
@ambient133
@ambient133 3 года назад
Hey man do I need to remove that back plate?
@ScottsPC
@ScottsPC 3 года назад
No... You'll need the back plate to attach the fan.
@ambient133
@ambient133 3 года назад
@@ScottsPC ow thanks man
@MarianGameDev-g7f
@MarianGameDev-g7f 18 дней назад
This backplate man.... I wasted 1 hour trying to screw the cooler until I realized this backplate fell down ....
@ThatRyanGuyy
@ThatRyanGuyy 7 дней назад
Super helpful, it's been so long since I built a PC since I have been buying complete or refurbished systems the last few times I got a new one or upgraded. But this time I decided to buy the parts and build one myself for the first time in years, I needed a few small reminders of things like how much thermal paste to use since I think I'll go with a better one than the stock. So your video was helpful, thanks.
@curtis1552
@curtis1552 2 года назад
I thought I could do this on my own without guides. But then I didn't realize the backplate disappeared and here we are😂
@ophbjason
@ophbjason Год назад
So, I didn’t know about the backplate cuz I don’t have access to it, is that an important step to why my pc says no signal
@jonadabtheunsightly
@jonadabtheunsightly 3 года назад
Oh, man, that plate on the back. Apparently they expect you to disconnect everything from the power cables to the front-panel connectors to the expansion cards, and take the motherboard *out of the case*, in order to install (or reseat, or remove) this turkey. Seriously terrible design.
@ScottsPC
@ScottsPC 3 года назад
Yep... Unless your case has a cut-out that's exactly what you'll have to do... Good luck to you! ⚡️
@nickmiller9910
@nickmiller9910 2 года назад
I’m panicking cause my screws won’t go in
@ScottsPC
@ScottsPC 2 года назад
If your installing with the motherboard in the tower, the backplate might have fallen off... Take off back side and check?
@nickmiller9910
@nickmiller9910 2 года назад
@@ScottsPC yea sorry I meant to update my comment, my backplate was off, thank you for responding to a comment on a year old video though, wish more content creators were like you
@garchomp3136
@garchomp3136 Год назад
Absolutely brilliant from you. I was struggling to engage all the screws for my cooler. You saying to engage a couple of threads in each screw before fully tightening everything was a life saver. Thank you.
@hugok9211
@hugok9211 3 года назад
I was right in the moment and realize the videos I watch didn't show wraith cooler damn, you saved me!
@ScottsPC
@ScottsPC 3 года назад
Glad the video was able to help. Good luck to you!
@sageofthetiger4166
@sageofthetiger4166 3 года назад
Lol the backplate fell off on mine and didn't figure it out until I saw this video thx so much
@ErickBRSAO
@ErickBRSAO 3 года назад
thx homie
@gandalfthegray7733
@gandalfthegray7733 3 года назад
I ran out of thermal paste, will taco bell fire sauce work? Great tutorial. Keep up the good work.
@ScottsPC
@ScottsPC 3 года назад
Just don't use toothpaste! ⚡️ hahahahahahaha! ⚡️ Thanks for the comment! ⚡️
@VerdiStudio22
@VerdiStudio22 Год назад
anyone having posting or video issues coming from a 5600 new?? I was about to install OS and prepped a usb but I can`t get video output
@TwoForOneGaming
@TwoForOneGaming 2 года назад
Thanks for the Video. I really had problems getting the screws in, it just did not wanna connect with the backplate. It felt so wrong using that much force.
@ScottsPC
@ScottsPC 2 года назад
First time is always the scariest. Feel like you're gonna break the motherboard...LOL. Thanks for watching!
@traveling8799
@traveling8799 3 года назад
Very beautiful presentation my friend, very great job well done 👍 Have good day and see you around 👍
@ScottsPC
@ScottsPC 3 года назад
Thank you! You too!
@xornedge8204
@xornedge8204 Год назад
The spring screws have to be the most stupid invention after the clip lock on the GPU 🤦‍♂️
@YoungOne777
@YoungOne777 3 года назад
It's been a fat minute since I built my computer and I forgot about the back bracket 🤦 🤣 I was pissed because I couldn't find out how to make my cooler thread lol
@LadyEvelyn96
@LadyEvelyn96 3 месяца назад
I never installed a Cooler before... one think i dont understand is why is the cpu out? Why not just put the old Cooler out and put the new one on it? Did i miss something?
@LetGoMyLegosTyler
@LetGoMyLegosTyler 2 года назад
help my screws aren't going up or down on the heatsink
@BrickPB
@BrickPB Год назад
What do I do with the backplate?
@zez3208
@zez3208 5 месяцев назад
I heard the stock cooler has a really sticky thermal paste?
@dommevida_8721
@dommevida_8721 2 года назад
I somehow cannot get my old cooler of my cpu. The back plate already fell out but somehow the fan is not getting off and I cannot untie the screws anymore. Can somebody help?
@funnywithit_
@funnywithit_ 3 месяца назад
its clear i took my cpu cooler to clean it since it was overheating now i dont have a computer at all i cant install this back even if my life depended on it
@windowswhistler229
@windowswhistler229 3 года назад
I subbed because this video got straight into the topic without a single second of intro, and was very helpful and detailed. Thank you very much for this video.
@ScottsPC
@ScottsPC 3 года назад
Thanks! ⚡️ LOL... I hate long intros and fluff myself. Thanks for the sub and thanks for watching! ⚡️
@ezequieltech
@ezequieltech 2 года назад
:)
@skybuck2000
@skybuck2000 2 года назад
Too easy, show how to install a bigger one.
@justadude88
@justadude88 4 месяца назад
So what do I do if i am installing it in the case? Last time I had my brother help me but this time I have to do it alone.
@masonbuckles4805
@masonbuckles4805 3 года назад
thank you so much, exactly what i was trying to find
@ScottsPC
@ScottsPC 3 года назад
Thanks for watching and good luck to you! ⚡️
@1stAid
@1stAid 2 года назад
Thank you for this video, I began installing the cooler (following the directions included in the CPU/cooler box) but that caused me to mess up due to the instructions not telling me that the backplate will fall off. I'm now trying to fix that problem....
@ScottsPC
@ScottsPC 2 года назад
Hope everything is good to go! Thanks for watching!
@1stAid
@1stAid 2 года назад
@@ScottsPC For a bit my PC wouldn't show as running on the screen (it was fine before the PC cooler change) so that worried me, but now it's running again. Although this weird thing happens where if I have all 4 RAM slots filled up, my PC won't show up on the monitor while it will show up on the monitor if just 2 of the RAM slots are filled.
@matteblack8707
@matteblack8707 2 года назад
@@1stAid hey mate i have heard that overtightening your cpu fan screws can cause problems like this
@garethhughes5745
@garethhughes5745 2 года назад
Im removing my motherboard now to check the backplate. Must have fallen off as the screws wont reach the standoffs at all. The older way of attaching the old rgb wraith cooler was much better with the clips. This is so fiddly i got thermal paste everywhere now.
@goldpluto
@goldpluto 2 года назад
im building my pc as im typing this and for some reason the screw wont go down and i have no idea why can someone help?
@Ricky-ce3jo
@Ricky-ce3jo 2 года назад
Subscribed my friend, my first PC build is in the works and you are the best I've found who explains the fine details
@ScottsPC
@ScottsPC 2 года назад
Thanks for watching and thanks for the sub! ⚡️ Much appreciated! ⚡️
@hochhasd1
@hochhasd1 Год назад
It looked like you were applt thermal paste to the cpu when you already had it preapplied on the cooler.
@thunder_cs
@thunder_cs 21 день назад
Thanks man!! this really helped a lot
@LinuXEnvironnment
@LinuXEnvironnment 2 года назад
muy poca pasta térmica, mejor es extenderla con una espátula por todo el procesador.
@garcelaraven3210
@garcelaraven3210 3 года назад
Its so hard the screw got spring
@harpagan3920
@harpagan3920 3 года назад
Bro i have problem with this fucking push pins i cant pin that to cpu
@turandonc7701
@turandonc7701 Год назад
I’m pushing really hard, and it won’t go in and idk what to do
@mertsamet2953
@mertsamet2953 2 года назад
you look like doctors )) at 3.41 min
@jjith2005
@jjith2005 2 года назад
This helped me so much, thank you!
@A4Paper
@A4Paper 3 года назад
Great video, will definitely refer to this later on, after reading comments I feel very lucky to have access to the backplate through my case back panel
@ScottsPC
@ScottsPC 3 года назад
Exactly! Easy access to the back plate saves a ton of time and hassle.
@shikadi5124
@shikadi5124 2 года назад
I was trying to screw it in and it would not go in what should I do?
@jrnamida5470
@jrnamida5470 Год назад
No back plate received with B550M DS3H AC motherboard, how do I get one? I do not want an I/O shield but the backplate to mount the cooler...
@ScottsPC
@ScottsPC Год назад
Check Amazon?
@sneezy1xx897
@sneezy1xx897 2 года назад
My screw Is not working I have to push it but don't know how to screw it like its not working
@ScottsPC
@ScottsPC 2 года назад
If you are building inside your tower, the back plate may have fallen off.. Take off the back of your tower
@felixrodrigues3861
@felixrodrigues3861 6 месяцев назад
I HAVE A LAPTOP WILL THIS WORK IN A LAPTOP???
@Trezn
@Trezn 2 года назад
Those screws do not go down lmao you cannot screw the fan down at all whatsoever I just put paste on it that’s all left the screws in without screwing them down
@scarpyblue9951
@scarpyblue9951 2 года назад
for me the cpu fan screws are too short so it doesn’t connect
@rusudan9631
@rusudan9631 Год назад
planning to upgrade me 3600 to a 5700x, can i remove just the wraith stealth without taking out my entire motherboard and everything? i do not have access to the backplate in my case it will sit on it's own right?
@rusudan9631
@rusudan9631 Год назад
@@Kryst1x hopefully the backplate has no place to go, it's probably stuck between mobo and side case panel and i don't like to tamper with hardware even tho i made my own PC's for almost 20 years now i like to avoid it if possible. my mobo supports it but i will have to do a bios update which is also smth i do not like to do as once i did that and my pc would not boot not even into bios but luckly it was in warranty and they fixed it. i'd upgrade in an instant if i knew that there's no potential issues
@eddiesurfah5525
@eddiesurfah5525 2 года назад
Legend. Thanks
@Deadscout9
@Deadscout9 11 месяцев назад
Thanks!
@Bennjammin
@Bennjammin 9 месяцев назад
Thanks I was wondering how it screwed in with no threads on the board. The wraith looks similar to the OEM Intel coolers in HP or Dells in the past.
@AppleSauceYo
@AppleSauceYo Год назад
I cant see to screw the cooler screws in its hard ash
@cblack2863
@cblack2863 2 года назад
This is not a good video for a beginner trying to install this cooler. I spent more than 1 hour trying to figure out why the cooler screws would not attach to the motherboard. You briefly mentioned the back plate when taking off the initial bracket but You do not explain how that backplate should be used to attach the CPU cooler when the motherboard is already Mounted in the case. I heard the back plate drop when I took out all four screws on the initial bracket With my motherBoard already installed in my Computer case but I had no idea what that meant.. Leaving out what to do with the back plate if the Motherboard is already installed in the case made this process incredibly frustrating. Little Steps that you take for granted are crucial for beginners who know nothing about installing a Cooler For a Rizon CPU on the motherboard that is already mounted in the case
@ScottsPC
@ScottsPC 2 года назад
Good point... I'm only human... Good luck to you
@nebula6409
@nebula6409 2 года назад
Thank you so much, I thought I was missing something when I couldn't put it on but just turned out the back plate fell 😂
@ScottsPC
@ScottsPC 2 года назад
You're welcome!! It's always the back plate....good luck to you!
@HarbringerSalami
@HarbringerSalami 3 года назад
What if I lifted it then placed it again with the smudgy thermal paste, is it okay? Or should I replace the thermal paste
@ScottsPC
@ScottsPC 3 года назад
My advice... When in doubt replace the thermal paste unless you have multiple experiences in taking on/off cpu air coolers... Better safe than sorry... Good luck to you! ⚡️
@kirilldgan1
@kirilldgan1 2 года назад
Привет,мы обычно наносим термопасту по всей поверхности процессора тонким слоем.У вас горошина посередине ))
@ScottsPC
@ScottsPC 2 года назад
Just the way I've been doing it over the last few years. My temps are good. More than one right way to apply thermal paste. Thanks for the comment!
@SpringMarker96
@SpringMarker96 Месяц назад
THANK YOUUUUU
@kaframanaricheta1401
@kaframanaricheta1401 3 года назад
Thank you! I was getting CPU fan error, then I watched this video and learned a few things!
@ScottsPC
@ScottsPC 3 года назад
Glad the video helped! ⚡️
@Redrobin7474
@Redrobin7474 2 года назад
I dont know if my cooler is broke but I dont have any of four things on the corners I only have two 1 on the top and 1 on the bottom
@Joseph32547
@Joseph32547 2 года назад
I never installed the screw type fan before and wanted to make sure i was going to do it right. Thanks for the vid that went straight to the point and was well done.
@ScottsPC
@ScottsPC 2 года назад
Much appreciated and thanks for watching! ⚡️
@someone3416
@someone3416 2 года назад
The problem Im having is that the cpu cooler mounting screws are not gettibg tightened and they are not moving down
@someone3416
@someone3416 2 года назад
@@Mooooourad i got it, Hold tye back plate all the way against the motherboard and do like three twists on each side tyen repeat, they should all tighten
@Michael-of9ce
@Michael-of9ce 2 года назад
Well explained. Thank you.
@Pokephira
@Pokephira 2 года назад
How hard do you have to push to get the cooler screws in?
@ScottsPC
@ScottsPC 2 года назад
In my opinion, like medium hard.. Just remember if installing the cooler while in your tower, make sure the back plate hasn't fallen off...
@serbanadrian1445
@serbanadrian1445 2 года назад
You also need to make sure that the back plate is still attached before trying to screw down the cooler. Is Correct ?
@ScottsPC
@ScottsPC 2 года назад
Yes... Absolutely
@titustech337
@titustech337 8 месяцев назад
Do you need the backplate for the default cooler?
@Rex-om4dt
@Rex-om4dt 3 года назад
When I try and tighten my cooler it makes these noises where it sounds liek grinding. I can only get one skrew in. Helppoo
@Rex-om4dt
@Rex-om4dt 3 года назад
I tried flipping it around and it still does it
Далее
Ryzen 5600X Stock Wraith Stealth Cooler Test
10:30
Просмотров 546 тыс.
ХОМЯК ВСЕХ КИНУЛ
10:23
Просмотров 583 тыс.
Как открыть багажник?
00:36
Просмотров 14 тыс.
I Took An iPhone 16 From A POSTER! 😱📱 #shorts
00:18
How to Upgrade an AMD Ryzen CPU (AM4 Socket)
4:20
Просмотров 108 тыс.
STOP DOING THIS!!!!!!!
16:35
Просмотров 4,2 млн
50% of all 4090 will end up in trash and here is why
14:26
How To Install AMD AM4 Ryzen CPU For Beginners
11:17
Просмотров 540 тыс.
Common PC Building Mistakes that Beginners Make!
22:30
First PC Building Experience
24:36
Просмотров 851 тыс.
This Cooler Might Kill Your CPU - EK Direct Die Cooler
18:51
PC Parts You Should AVOID Buying in 2024! ❌
13:47
Просмотров 164 тыс.