How To Install A Shower Pan Base And Drain - FAST And EASY!

Подписаться 562 тыс.

Просмотров 926 тыс.

50% 1

In this video, I'm going to show you how to install a shower pan base and drain - fast and easy! This is a great DIY project that can save you money, and it's not as hard as you might think. So watch the video, follow the steps, and enjoy your new shower!
Here is the follow up video. How To Plumb A Shower Drain - Connecting Shower Drain To Plumbing
• How To Plumb A Shower ...
🔴 Subscribe for more DIY tips to save a TON of money: ru-vid.com...
🟡 Check out my Amazon store! 👉 www.amazon.com/shop/theexcell... . Here you will find tools and supplies used in my videos. (DISCLAIMER- I am an Amazon affiliate. I get a small commission that helps support the channel at no extra cost to you)
Shower Supplies amzn.to/37MWiXB
Shower Drain amzn.to/39rAjG9
Offset Shower Drain amzn.to/3leku8k
Oatey Plumbers Putty amzn.to/39ljmNp
Black Swan Plumbers Putty amzn.to/3FMYg6C
My Tool Belt Setup amzn.to/32kmcyz
Tool Belt amzn.to/3E4v1Kc
Hammer amzn.to/3E8kldp
Tape Measure amzn.to/3J68hNx
Speed Square amzn.to/3J0cPoF
Chalk Box amzn.to/3p9ziYv
Utility Knife amzn.to/3ecJPM9
Timestamps
Intro 00:00
Shower drain install 01:23
Leveling shower base 05:59
Mortar mixing And spreading 07:50
Setting shower pan 09:95
Anchoring shower pan 10:01
Outro 10:44
Disclaimer: This video is all based on my personal opinion and is for entertainment purposes ONLY. I am not a financial advisor, CPA, attorney, tax advisor, electrician, plumber, housing contractor, designer, or any type of profession to give advice. I am just a consumer sharing my experiences and research. If you do need knowledge for those types of things, I will advise you to seek help for those professionals.

Хобби

Опубликовано:

30 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 273

@TheExcellentLaborer Год назад

Here is the follow up video on how to plumb the drain ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3g3TMrkGqPs.html

@sarahgrooms5606 Год назад

I watched your video, that's how I learned how to do it myself. I am 67 and still learning.

@jorj092 10 месяцев назад

@@sarahgrooms5606333-5 1 ee rutted

@hindisongsandclassics8468 5 месяцев назад

Do you have videos of doing a walk in shower with those stick on wall panels ? That would be very helpful . Thanks

@stose85 2 года назад

Make sure to read the instructions on the drain to ensure you use the proper material i.e. plumbers putty vs silicone. Some newer acrylic materials call for silicone only because the plumbers putty will break down the plastic.

@duanestephens8570 Год назад

Concise. No dumb jokes or music. It's a very helpful video

@ruelsmith 2 года назад

As a licensed professional plumber, I would NEVER drill through the flange. That can lead to failure. Instead, use #10 or #12 wood screws and stainless washers and screw them in just ABOVE the flange, catching the flange only with the washers. This requires you notch out the backer board for the screws. You don't want any penetrations in the flange area. Do not count on waterproof coatings or membranes to fix that issue. The flange is there for catching any water that gets behind and you don't want to compromise that. Other than that, I'm glad someone on RU-vid finally gets it right by using a mortar bed. I do mine differently, by using long mounds that get squished as you set it, but , at least, you understand the importance of bedding your pan. Same goes for a bath tub. It'll now support a 400 person walking around on it, as long as your joists and subfloor are properly stout enough.

@p.steven2413 Год назад

I Agree Totally With You . There is No Good Reason to do it the way he did it .

@johnnydo6410 Год назад

I didn't see how he glue the last drain pipe??

@ruelsmith Год назад

@RICK MERAZ Not if he's screwing throught the flange, he isn't. Get a clue on waterproofing.

@francom6230 Год назад

..even your way the flange could crack just as easily ..

@ruelsmith Год назад

@@francom6230 no it won't unless you're tightening the hell out of the screws. The flange is caught underneath by the ledger boards, caught on top by the screws. And only snugged to the walls, held by large washers that distribute the load of the screws across a wide area. They don't need to be anymore than snug with the flanges pulled all the way to the wall. Screwing through flanges introduces a water leaking issue you don't want. No legit plumber I know installs them that way.

@mjremy2605 8 месяцев назад

That was very interesting. You did a great job, very solid install! So the shims were to lift the pan slightly for draining. Love that shower pan, very nice!

@billhamilton7524 Год назад

mortar from center and out is all that's needed since thats were it may flex,,permitter is super strong ,,just use mud to level ,,no shims needed,,,good job josh

@jgalindo9976 2 года назад

Always helpful information I love the way you explain step by step 👍🏻

@TheExcellentLaborer 2 года назад

I’m glad you enjoyed the video! Thanks for the comment!

@Eastbaypisces 11 месяцев назад

@@TheExcellentLaborershould I install bathroom fan before I do this?

@gocybertruck8189 24 дня назад

I’m looking into converting my tube to walking shower. Your step by step are excellent and it is what I need to do mind.

@0blivioniox864 9 месяцев назад

Man you are a wealth of knowledge. How did you learn all this stuff? just by "doing"?

@greggdupree6191 Год назад

If you ever get the opportunity too a video on a tileable shower pan with bench installation would be awesome. You're videos are great 👍🏻.

@TheExcellentLaborer Год назад

I will keep that idea in mind. Thank for your support!

@edday2009 Год назад

Type S. Mortar. Good presentation.

@choumsnyder1938 8 месяцев назад

It’s good to know I’m not a builder but love to watch

@ilkertaysi6812 Год назад

the most crucial part is missing: how to connect the drain to the pipe...

@symcardnel1741 2 месяца назад

Josh is the best. I wish I had him as an instructor for wood/metal/small eng shop back in grade school. MAYBE that would have kept me from hanging out, by the bleacher's, with the burnouts.

@BathroomRemodelingTeacher 2 года назад

Nice work and attention to detail 👍

@TheExcellentLaborer 2 года назад

I appreciate that BRT! Shower pans may not look as good as tiled bases but much quicker for sure. Thanks for watching!

@BathroomRemodelingTeacher 2 года назад

@@TheExcellentLaborer for sure 👍 I’m doing one tomorrow, 😆. With all the cost increases many people are trying to save a little bit in areas. A shower base can be half the cost in some cases.

@TheExcellentLaborer 2 года назад

@@BathroomRemodelingTeacher Oh yeah I have always been a fan of the prefab shower pans. I did a few without them and it is a lot more work too. Good luck with your project!

@fuegoman45 2 года назад

Thanks Josh!! Another outstanding video 🤙❤️

@TheExcellentLaborer 2 года назад

Thanks Todd! I hope all of your projects have been coming together well. Glad to see you stop by!

@joeherrera3466 Год назад

@@TheExcellentLaborer Excellent Video....I became a DIY guy not to long ago after I purchased my first home. I am currently installing one of these pans but my floor is cement. Do you use PVC glue prior to setting the pan on the Mortar and into main pipe? Thanks in advance Sir!

@papagiorgio85 2 года назад

You should have your own show. I love how meticulous you are, that makes for a perfect job👍🏻

@TheExcellentLaborer 2 года назад

Sign a petition to get The Excellent Laborer on HGTV! I appreciate your kind words that would be cool to have my own TV show. RU-vid is just as cool I think lol. Thanks for commenting and watching!

@davidharrison3074 2 года назад

Great job Josh. I've had people argue with me about using a cement mix on shower pans along with tubs. Most all manufacturers recommend doing it to have a secure surface and solid for a warranty issue as well. Same thing using felt paper is always best so everything cures naturally. I've used the kerdi system as well which the drain system is an amazing setup. Using the membrane on the walls which can be applied over drywall as well. Fastening the fiberglass base, I've used stainless screws and countersink them a bit. Still a wonderful description of the process and offset drains. 👍🏻👍🏻

@TheExcellentLaborer 2 года назад

You definitely cannot beat having mortar under the shower pan. I have stepped on shower pans without mortar and you can tell a big difference. The Kerdi system looks interesting but I have never used it. It does look like a good set up. Thank you for stopping by and watching my Sunday video release!

@mr.g937 2 года назад

Cement mix as opposed to what, having no bed at all and putting the pan directly on plywood?

@davidharrison3074 2 года назад

@@mr.g937 yes. Basically most manufacturers recommend using a cement mix under the tub or shower base unit. The other shower product, schluter, is a fantastic system. The shower pan and drain system is basically a no leak system when installed correctly. Take a look at this product for a shower system.

@judgy3 11 месяцев назад

Previous owner never cemented our pan now its cracked and we need to buy a whole new shower because we can't get parts for it .. not doing that will cost us $700 for new shower plus labor and tiling to put it in

@vdarr1 4 месяца назад

If shower pan has 12 round legs under it 5 inch diameter..Can I skip mortar

@CuriousEarthMan 2 месяца назад

Great video, thank you!

@gladdenhandymanllc962 2 года назад

The biggest part I wanted to see was how you made sure the drain actually hooked up to the drain pipe.

@ruelsmith Год назад

You hook the drain up _after_ you set the tub. You can swing a trap if necessary. It's not like a toilet where you have to aim to seat the drain.

@craigmellott6339 Год назад

That’s exactly what I wanted to see also. He didn’t use any glue or talk about making the connection either. But besides that great video.

@robertforehand1631 Год назад

Only 2 ways to set this...... applying glue right before setting into mortar bed (assuming your dry fit showed you were "spot on"... OR set AFTER putting into mortar bed....pvc pipe sticks up higher than normal (every drain/mfg requires a different height) and you put a rubber ring around the outside of the vertical pvc pipe, then it gets "locked down" with a brass set ring that screws into main pvc drain and pushes against rubber seal to compress it against vertical pvc drain pipe.. since he did not pop off the metal drain top, I could not see which version he was using here....but assume from what I saw that his was the glue type only.... this has got to be one of the hardest parts about shower pans so it would be great if you can post a follow-up/replacement video to show this step in detail for everyone....seems like most wanted to see that part!! Thanks for the post!

@vineetbhandari4863 Год назад

Exactly, they shows everything super detailed that's common sense, money parts are always... "and I checked its perfectly aligned.. LOL how????"

@billhamilton7524 Год назад

@@robertforehand1631 being an offset drain the thick rubber o ring would not work I don't think ,IMO are the best and easiest

@dustingariepy2056 2 года назад

Skip the putty and use silicone, especially in a tub or shower pan. Eventually you'll be cutting a hole in your ceiling after a leak caused by cracked putty. Putty is fine in a sink, but not a tub or shower.

@ma7rix13 Год назад

putty says “do not use on plastic” on the container.

@stevekovacs4093 Год назад

Putty has been used on tubs for decades The rubber gasket below creates the seal. Same thing on a sink.

@mram7715 Год назад

Some bases such as dreamline actually calls for silicone in the instructions

@huu7hbbjko Год назад

He didnt glue his drain connection either.

@dillondoty1346 Год назад

Bro if you know how to do this why are you watching it? Make a video then.

@therealguru5126 Год назад

quick tip, I keep lipstick in my tool box for instances like this. I place the lipstick on the feet and then when I dry set the pan, the lipstick shows where the feet are. I hate measuring if I do not have to.

@symcardnel1741 2 месяца назад

omg... when I saw lipstick I started to sweat

@abrahamvargas2830 2 года назад

I like you videos. I'm from Porterville California much love bro ❤ I just watched you tile video 👏🙏

@TheExcellentLaborer 2 года назад

Hey Abraham! California is a long ways from me. That is so cool you’re watching my contact from there. I hope you like the tile video as well! Thanks for watching!

@abrahamvargas2830 2 года назад

Yea I like your videos bro who wouldn't I wished you helped me install my tile inside my garage but the tile video you put that will help me alot thanks 😇

@robertocasillas565 28 дней назад

Nice thanks it help me a lot

@vicentamartinez Год назад

Awesomeness job

@johnvalencia7488 Год назад

So does the tub drain assembly just slip fit over the main foundation drain pipe or inside of the main foundation drain pipe? And does it get glued together? Thank you!

@jonathanbronson1433 9 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3g3TMrkGqPs.htmlsi=Uj7yxNu8JBNXEJcy

@dansmitham2437 10 месяцев назад

I find when mixing mortar in a bucket, it's better to put about 80% of your water in first, which for a full pail is about 4 inches. Then add about half your dry ingredients, mix it into a slurry, then add the rest. This help prevent dry mix from collection in the bottom corners after mixing.

@joking6052 Год назад

How was the pan drain fittings connected/glued to the underground sewer lines ? That was the part I needed help with. I'm baffled by your method, did I miss a step ?

@DwightSchrute-mp4kn 2 месяца назад

just dont use water and you will be fine

@scrogathon 2 месяца назад

My guess would be the hookup was done from the ceiling below.

@vasiliylagutochkin8333 2 года назад

Good job man.

@TheExcellentLaborer 2 года назад

Thank you 💪🏻. I’m glad you liked it!

@billydagenham Год назад

Great stuff man. I really appreciate your explanations

@gholakata4404 10 месяцев назад

Thank you

@lindamartin8421 Год назад

Awesome job Josh! how many of the Mosaic Tile you purchased, and how many cases of tile did you purchase? I am actually using the same tile . my shower is the same size as yours.

@christopherdekonstrukt444 8 месяцев назад

You showed me how to put entrance doors in and J-channel around one of them.👍

@86mistercarter Год назад

Great video got a question what if you have to remove old tile flooring to put a pan what do I do about the lip of the pan do I have to cut bottom tiles out of the walls?

@davek6630 2 года назад

Don’t ever use drywall screws, or any counter sunk screws, it will crack the shower pan. I use a flat screw with a large head, made for metal lathe. They look similar to a Krag screw, but are stainless, and the head is larger.

@RapidRepair Год назад

Yes. Great reminder 👏🏼

@danielchism934 9 месяцев назад

Just use the same coated screws you'd use for the backer board. They have a flat washer style head and are actually made for shower installations.

@noahb.7838 2 года назад

Great video my friend

@TheExcellentLaborer 2 года назад

I appreciate that Noah. I’m just glad to see you comment on the video. Thanks for watching!

@guidoitaliano7722 Год назад

When screwing the drain in, is there a certain amount tension I need to know before I go to tight and crack the acrylic?

@allenh5389 2 месяца назад

Thanks

@kikoyyoutubetv8206 8 месяцев назад

Great sharing lodz some negative comments just egnored them but they are important for the view 😅😅watching from Canada 🇨🇦

@garysicard7199 Год назад

Hi Josh, enjoyed your videos on the showers. Gary here, You are gonna hear from me a bit as I am taking on a shower redo from a full one piece shower that I will be tearing out. and seeing what i am dealing with from there. I will use a shower pan and tiling the rest with a detail around 6 foot. I hope not to have to build my own shower base due to dimensions,

@TheExcellentLaborer Год назад

Hey Gary! Sounds like you got a big project ahead of you. Just make sure you have everything ready to go so it goes quick and smooth. Good luck with your project!

@artz50 2 года назад

Nice video helped me out thanks:),.;)

@TheExcellentLaborer 2 года назад

You are welcome Arthur!

@geovannicruel9360 2 года назад

Como siempre maestro buen trabajo yo estoy ganando dinero por lo que he aprendido de ustedes felicidades a usted y a su familia sigas adelante que yo voy detrás aprendiendo de usted es un maestro

@TheExcellentLaborer 2 года назад

Congratulations on learning and earning! I’m still learning new things every day in the field. I love construction. I appreciate you watching and good luck with your business!

@lindarivers6917 6 месяцев назад

I use coated deck screws to secure mine. Drywall screws rust in short order in a moist environment.

@itmaslanka Год назад

I saw you drop the pan but couldn’t figure how the drain connected to the drain pipe ? No putty or silicone?

@joshpryor5159 Год назад

If I have a concrete slab, how do I know how far to have the drain above the foundation?

@bilbobaggins4462 Год назад

Hey Josh - love your videos. Dumb question for you: you didn't show cementing the drain opening to the drain pipe. Did you do this when you installed the pan? thanks!

@TheExcellentLaborer Год назад

This video will help ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3g3TMrkGqPs.html

@jesselaporte7184 3 месяца назад

Question. Renovating an old cabin. The new shower pan drain is about 2” off both ways of the house drain. What can I use to make up that difference to align them? Thanks for the videos

@andrewcarr2431 2 года назад

my only thought would be why the tar paper? mortar bonds fine to the cement via the use of a bonding agent (epoxy) and you could even use a modified thinset product for added strength. Guess the felt would add some extra moisture barrier between the pan and the concrete.

@harishveeramani2907 2 года назад

I believe it is to keep the sub-floor from absorbing all the moisture from the mortar. Cheers!

@jacquelineatkinson8760 Год назад

The subfloor is wood. Wood would absorb the moisture from the mud possibly rotting the wood and ruining the setting of the pan into the mud.

@sailingmollygrace4596 10 месяцев назад

So you connected to drain to the shower pan, but not the drain to floor? Do you cut a hole in the ceiling and hook that up after?

@johnnytest55 Год назад

Do you have a video for shower mud pan install?

@deniseowens9972 11 месяцев назад

WhF would you suggest when putting galvanized tn the walls

@carlossosa2940 Год назад

do we really have to put cement underneath the shower ? what if is level and dont add cement will be alright or have to put cement anyways?

@thetipsheet970 8 месяцев назад

Just used lepage 2 in 1 Express Silicone and it failed the leak test, called them Henkel and they said it is not for use to seal drain, it says on label premium flexibility sealant. Josh have you had any problems with plumbers putty yellowing or degrading the fibreglass? Love all your videos!

@BZ1340 Год назад

How do you tackle if the drain system in the floor is too high cannot be lowered for correct pitch to drain. I came upon a concrete floor with a roughed in system, the ABS feed pipe is 1 1/2 inches below the floor level but needs to be extended another 14 inches to drain location so the pipe would be too high to get the drain assembly and pan to sit flat on the floor. I think I need 3/4 -1 inch of rise on the floor. To get the pan installed

@alexpatrocinio2430 Год назад

i have a plans to renovation my small shower with 47", but the shower pan come with minimun 48", can i cut the studs around the shower to fit the shower pan (48") inside my space (47)?

@johnvalencia7488 Год назад

Does the felt paper only get placed under the tub enclosure pan, or can you run it up the sides, above the tub pan a ways? Thank you.

@TheExcellentLaborer Год назад

You could run it up to sides but it’s really not necessary. Hope that helps!

@deezerdeezer 8 месяцев назад

How do you attach the drain to the pipe? Do you have access to the underneath? What do you do if you don't?

@Jesus-uy5oq Год назад

Hi Josh, came across your site enjoyed the videos including your install instructions. I'm in the process of demo and will be installing a shower base/pan. I'm concerned about quality. Can you recommend a quality unit, or the name of the manufacturer for the shower pan installed? Thanks!

@RadhadaniteBabylonian Год назад

I am ordering mine online from a company, Custom Shower Bases, in Calgary, Canada. I needed to have my shower pan custom made and I really like what they have to offer. They have three type of bases, assortment of colors, base shape, wall locations, threshold and drain types. Much less expensive that what I can find locally. Good Luck!

@kgg0015 Год назад

How did you connect the drain in the shower pan to the pipe below?

@jonathanbronson1433 9 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3g3TMrkGqPs.htmlsi=Uj7yxNu8JBNXEJcy

@yasirwarraich3632 5 месяцев назад

please make a video on your knowledge source just kidding 😁😁love to watch your videos

@nybdr657 Год назад

So when you find you center on the drain do u measure using the studs so when i order the shower they come precut for darin and it will fit perfect?

@TheExcellentLaborer Год назад

Yes, it’s roughy framing measurements. Hope that helps!

@MUABANNHA Год назад

Good

@TheExcellentLaborer Год назад

Thank you!

@ridinrancher9443 2 года назад

Hey I have a question. What is the difference between using a shower pan and the dry pack method? What is your opinion on the two? Thanks great video!

@TheExcellentLaborer 2 года назад

The dry pack mud pan is a lot more work and time consuming. Some would argue it looks better because you can put tile over it. Unlike the shower pan you see here it is fiberglass and you do not tile over it. My opinion is that it is not worth the extra effort to do a dry pack mud pan. I think the fiberglass pans work just as good. Hope that helps!

@ridinrancher9443 2 года назад

@@TheExcellentLaborer thanks for responding it helps a whole bunch and cleared up some confusion

@BuildLessons Год назад

@@ridinrancher9443 I have seen lots of service issues with the daypack method in regards to leaks around the drain, and daypack crumbling into the drain hole in the subfloor!

@treschisquetes Год назад

I’m trying to see the process of assembling the panels

@bayareatrucking 2 месяца назад

I understand that hands on learning is the best method to learn. But like any other profession. Is there anything I could study to learn some things of the trade?

@christopherdekonstrukt444 8 месяцев назад

Have termite damage in the bathroom walls, since they're not load bearing they can be sistered so I have something to hang concrete backer board and Sheetrock on. It's the outside walls that concern me.

@dannyreed447 Год назад

What kind of screws do I use to install the same shower?

@Deleon-gu2qb Год назад

I added a shower pan and they recommend silicone and not plumbers putty.

@TheExcellentLaborer Год назад

Every manufacture has its recommendations.

@pastrami00 Год назад

Can you use felt paper over OSB flooring so I can put down thinset before durock?

@mjremy2605 8 месяцев назад

Use a Kerdi membrane or Kerdi board instead.

@dw8840 Год назад

Screws would be better. But I know a lot of construction crews try to cut every corner and do it as cheap as they can.

@lallen968 Год назад

Hello Sir, why we need shim under the shower pan?

@thomasberezansky95 4 месяца назад

need some advice, my screw in Oatey drain is slightly above the pan when fully screwed in...is that correct? shouldn't it be recessed down or even level?

@lc_fundesigns702 Год назад

Can i install a shower base over waterproof flooring?

@tszymk77 2 года назад

I used stainless steel lattice screws instead of the galvanized nails.

@TheExcellentLaborer 2 года назад

That’s a good idea. Thanks for your input!

@dianevessels2632 Год назад

You didn’t show how you removed the drain cover from the drain in the floor or how you made sure the offset drain was lined up.

@First426 Год назад

Shouldn’t it be a angled towards the drain or does the pan comes a little slant?

@charltonheston969 5 месяцев назад

How did u attach drain to the pipe underneath, glue?? i must have missed that part

@masiphinix4745 2 месяца назад

Does the base should be level or one side a bit up for the water to go in drain?

@saggitarior7331 11 месяцев назад

Do i have to use cement board if i want to install a corner shower board from delta??? Helppppp❤

@bryanhauschild4376 5 месяцев назад

I was going to use Palisade tiles and I’m concerned the nail head Will stick out too far. Also how to run the tile over that shower pan lip.

@DerekFromBK Год назад

Answer to all the drain pipe questions... He has a crawl space under the shower and shows this in the next video.

@TheExcellentLaborer Год назад

Thank you for this comment!

@captain_melchior 7 месяцев назад

Question, I didn’t see you use any sealant on the drain that was going onto the drain pipe. Did I just miss that step, or is there another trick to it? I don’t have the space to get under the pan once it’s set, so I’ll have to do it in one go - any tips or tricks is appreciated! Also, if the drain pipe was just installed slightly off, could I use an offset drain to make up the difference, or better to cut and replace to make use a regular drain?

@mrbyamile6973 7 месяцев назад

That was my question also. I saw another video where a rubber ring was installed from tge top that sealed pipe and drain (like a compression fitting). I presume it's that style. I have the same issue, don't want to cut ceiling open below where shower is

@Mozzate1 Год назад

Hi Josh, can I ask how the drain part connect ? just put in ?

@TheExcellentLaborer Год назад

This video will help ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3g3TMrkGqPs.html Good luck with your project !

@richardhoner7842 Год назад

Would this be OK? Shim out the shower pan 1/2" from the wall and cut cement board to sit on top of the flange. Silicone caulk that joint. This way the tiles can be placed over the shower pan flange almost touching the pan. Silicone that joint too.

@sawmillguy9706 5 месяцев назад

Will thin set work?

@markfradl 11 месяцев назад

Hey y'all, check your manufacturers instructions - mine says not to use plumber putty because it will "degrade bathtub material" -- says to use latex/acrylic sealant or a gasket

@nickcapetanakis7171 Год назад

Do you need to use pvc cement for the drain to the pipe?

@jonathanbronson1433 9 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3g3TMrkGqPs.htmlsi=Uj7yxNu8JBNXEJcy

@andrewr5710 Год назад

How did you hook up the drain pipe to the tub drain

@jonathanbronson1433 9 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3g3TMrkGqPs.htmlsi=Uj7yxNu8JBNXEJcy

@gerardsagliocca6292 Год назад

Why can't u use mortar mix bags from Home Depot? Why go through all that mixing from scratch ? Also some manufactures like Delta, states that if base is level, mo extra cement base is needed. Are you ok with that instruction?? Also , on installing the Otay drain, can you take it apart and glue in the lower half of the Otay drain and then lay down the fiberglass pan down on top of drain installed and then put plumber putty on final piece of the Otay drain and then screw in the top portion into the drain ? Or you have to do u have to do it the way you did it in this video ?? Sorry for so many questions.

@johnvalencia7488 Год назад

If my pan will sit on concrete floor and not wood, do I still need to lay down roofing paper first? Thank you!

@TheExcellentLaborer Год назад

It would not be necessary on a concrete floor. Hope that helps!

@johnvalencia7488 Год назад

Much thanks !

@TheBeginner22 5 месяцев назад

Don't you use solvant to glue the underneath pipe with the drain?

@paulrohrs2110 Год назад

that shower base can "receive" either a wall surround or tile correct?

@alcifrerdewich2323 Год назад

and yhe pipe conection????

@TheExcellentLaborer Год назад

Here is the video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3g3TMrkGqPs.html Hope that helps!

@garnermorgan7785 Год назад

Professionals never use the fiber gasket they put spit on the gasket then tighten it! You must also make sure the putty doe not get between gasket!

@IntelligentElephant Год назад

So how did he hook the drain up? I guess I missed it

@TheExcellentLaborer Год назад

Hey Jay! This video will help you out ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3g3TMrkGqPs.html

@JasonPullara 2 года назад

bob vila fired. josh new bob.

@TheExcellentLaborer 2 года назад

I literally laughed out loud when I read this comment lol. Thanks for watching 🔨

@BY-sy7tr Год назад

How you connect the pipe for that drain?

@TheExcellentLaborer Год назад

This video shows the hook up ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3g3TMrkGqPs.html Hope that helps!

@newsomsr2000 2 месяца назад

Hey on the shower drain you're wrong read the instructions it wants you to use silicone it said the Play-Doh or the Carpenters dough or whatever it will break down the acrylic overtime