Тёмный

How to Install a Spiral Balance on a Tilt-In Window 

All About Doors and Windows
Подписаться 5 тыс.
Просмотров 47 тыс.
50% 1

Whether your single or double-hung window is falling down in its frame or rising seemingly on its own, Andrew is here to help. In this video, he shows you that no supernatural shenanigans are going on, but instead that you need to replace your window balance! Check out the video for a great walkthrough on this issue and the best ways to replace these types of window parts.
Spiral Window Sash Balance Rods: bit.ly/3i9duLY
--------------------------------------------------------
Subscribe: bit.ly/3EjZCa6
All About Doors and Windows has been serving homeowners, contractors, and everyone in between for over 35 years. Located in North Kansas City, we ship nationwide and strive for the most helpful, personal customer service. Visit our website at AllAboutDoors.com or call to speak with one of our specialists!
www.allaboutdo...
Continue the conversation below or find us on
Facebook: / allaboutdoorsandwindows
Instagram: / allaboutdoors
TikTok: / all_about_doors
CONTACT US:
www.allaboutdo...

Хобби

Опубликовано:

 

3 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 26   
@h7opolo
@h7opolo 2 месяца назад
2:15 finally, i watched a dozen videos before yours which is the first to show the removal of the vinyl cover.
@jessicah8630
@jessicah8630 Месяц назад
How do we get it back in, is there a trick?
@h7opolo
@h7opolo Месяц назад
@@jessicah8630 should be able to put one edge into the groove first, then bend it so it arches along the length of the cover so you can squeeze the other edge into the groove. release, and the cover is installed.
@JoseMartinez-pr5wb
@JoseMartinez-pr5wb 8 месяцев назад
Thank you so much. I knew how to replace but didn’t know I had to twist the aluminum balance to the right!
@alfredoorlando6783
@alfredoorlando6783 Год назад
Thank you. Very helpful
@cmanofthewoodscentralus3217
@cmanofthewoodscentralus3217 11 месяцев назад
My covers broke when removed due to being brittle. Is there a place to purchase replacements that you can recommend?
@angelosantaniello6829
@angelosantaniello6829 Год назад
Thank you. Very helpful 👍🏼
@AllAboutDoorsandWindows
@AllAboutDoorsandWindows Год назад
Thank you for watching!
@michaelking42
@michaelking42 2 года назад
Great video thank you.
@randyw6864
@randyw6864 2 года назад
Just changed out the aluminum balances, pre- loaded 3 turns to the right installed window lowered and both sides pulled out of tubes. installed two other new ones without pre-load and window does not stay up. Should I try with just one or two turns to the right
@KennethJagodowski
@KennethJagodowski Год назад
Try giving it a few more turns for more tension.
@mistered1397
@mistered1397 2 года назад
Thank you. Very detailed info. Just what I needed.
@AllAboutDoorsandWindows
@AllAboutDoorsandWindows 2 года назад
Great to hear!
@marvinporras-mx3ki
@marvinporras-mx3ki 3 месяца назад
That is only when changing the balance on the inner window how about the outer window?
@timmytee734
@timmytee734 2 года назад
My window shoe broke. Do you have a video how to change that?
@terrilohmier387
@terrilohmier387 Год назад
What makes these go bad? I have eleven windows with the same issue.
@diana6842
@diana6842 11 месяцев назад
We have 12 windows, each with the same problem. I guess just age and wear and tear. Ours are about 25 years old. We're in the process of replacing the shoes in every window and a couple of the spiral balances. We started yesterday afternoon. Two down, and ten to go! It's a pain, but doing it ourselves is saving so much money.
@randyw6864
@randyw6864 2 года назад
Update: On the second set I installed I preloaded two turns tor the right, installed window and tested, raised the window and it stayed up. closed the window and noticed there was a gap at the bottom. Gently closed it and both side failed again. Double checked the lengths with the old one and they were the same length. However the old plastic one had a plastic mount whereas the aluminum has a hole at the top to of the tube. I believe that the difference was just enough not to allow the window to not fully close. Also noticed that the tube with window closed rode at the edge of the window, so you had to push the tubes in in order to raise window. Were going to order four more, but I'm going to lower the balance 1/2 to 1 inch on each side to avoid pulling internal part out as well as lowering the tube should take care of the balance from trying to ride out of the window. AH the joys of home ownership!!!
@AllAboutDoorsandWindows
@AllAboutDoorsandWindows 2 года назад
So much of DIY is just trial and error! We commend you for sticking with it and being a natural problem-solver! We hope our videos help!
@randyw6864
@randyw6864 2 года назад
@@AllAboutDoorsandWindows Your video was very informative, the draw back was the replacement balance was slightly off from the original by not more than a quarter of an inch. Just enough to cause all the problems I encountered. I do believe the next attempt with the changes I mentioned should resolve any prior issues I experienced. God hates a coward!!!
@michaelking42
@michaelking42 2 года назад
Great comment and thank you for the information. Replacing mine now and can't buy the balance spring the same length as on the window; off by 1/4" or 1/2"...yes two different sizes. A question for you Randy, if I went a size shorter on the balance spring, that means I would have to lower it by comparison to where the original was mounted, right?
@KAFKUBA
@KAFKUBA Год назад
You turned it CW
@joli184
@joli184 2 года назад
Yes my question is what happens when the top window falls and the bottom window falls 1st the bottom window has no traction and The top 1 finally falls on top of that 1 what do I need to do than
@AllAboutDoorsandWindows
@AllAboutDoorsandWindows 2 года назад
Hello! Please contact us at this link below and we can help you further! www.allaboutdoors.com/contact-us
@stevenziegler2523
@stevenziegler2523 Год назад
Do the balance replacements come in one size?
@AllAboutDoorsandWindows
@AllAboutDoorsandWindows Год назад
Hello, we very much appreciate your question and would be more than happy to help. No, spiral balances come in different widths, lengths, and weights. For instance, tube diameters can be 3/8, 1/2, 9/16, 5/8, 21/32, or 13/16 so there are many different options for balance replacements. If you still need assistance then please feel free to contact us via the link provided and allow one of our experienced customer service representatives to assist you in resolving this issue. www.allaboutdoors.com/contact-us Thank you and have a great day!
Далее
How To Replace a Spiral Balance In a Tilt Window
2:24
Просмотров 3,6 тыс.
HOW TO: Change Constant Force Springs
7:12
Просмотров 115 тыс.
Spiral Tube Balance Installation
5:42
Просмотров 14 тыс.
Double Hung VS. Single Hung Windows
17:20
Просмотров 177 тыс.
Fixing the Sash Balance Shoes on a EcoShield Window
4:03
How to Remove a Pivot Shoe (Cutout Method) [1080p]
4:32