No video :(

How to Install and upgrade to LED lights on a trailer

Подписаться 21 тыс.

Просмотров 173 тыс.

50% 1

View this product at my amazon store. Click on the link below:
www.amazon.com...
Visit my amazon store and help support this channel:
www.amazon.com...
Upgrade to LED. Converting my utility trailer from the old Bulb style light to the new LED lights. Off with the Bulb on with LED!!
Kit is complete and easy follow instructions. I go step-by-step and show you just how easy this is.
Click on the link to see the LED light kit from Home Depot
www.homedepot.c...
Tools and supplies used
DeWalt DCD 771 Drill
3/16" drill bit for pilot hole
1/4" drill bit
7/16" deep socket and ratchet
wire cutters
wire strippers
4 - 16 to 14 gauge wire butt connectors
heat shrink tubing
2 - 1/4" 16 to 14 gauge ring terminals
terminal crimping tool
If you have any questions,comments or thoughts,
Please leave them below
stay up to date with all new product reviews,
projects, home improvements and any announcements
Thank You for viewing
Subscribe and Like
Follow me on twitter
rick@backintheshack
Check out my home page
plus.google.co...
Check out My Channel
/ theshackhome

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@peteyfly1 5 лет назад

These RU-vid videos represent the Fathers we all wish we had- Someone who takes the time to show us how to do things with patience and communication- Thanks so much!!

@jessej4974 5 лет назад

Great video. Installed trailer lights following your video, made the job so easy. Thanx for posting.

@ranferiaguilar5623 3 года назад

Muy bien amigo exelente gracias por. Tu Tiempo ⏱ enseñar es sabio. Es lo único que se deja Al patir. Thanks brother. 🇲🇽

@fishingwithswirvin1981 9 дней назад

Just bought these! Ty for the vid brother

@makavelimexicano 5 лет назад

Great video! Thanks for posting. I have to weld some trailer light enclosure upgrades tomorrow morning and have never done wiring on LEDs...swapping out the old style lights such as these. Thanks 👍

@douglasstyers712 10 месяцев назад

Outstanding video and one can see just what is being done and how. Great Camera Work. One Concern not mentioned and I hope you have done it now is YOU CAN'T MIX Incandescent lites with Incandescent lites... I hope you have fixed your trailers all other lites over to LED also. If not please do so.....

@philoeolivarria448 6 лет назад

Great video....i picked some up and they make it so easy to install.......

@TheShackHome 6 лет назад

Philoe Thank you. they do make it easy and i really like them. Being so low on my trailer and LED much brighter i feel they grab drivers attention much more than the old bulb lights. Thanks for viewing

@alfredobm6877 3 года назад

Thanks for sharing!

@TheShackHome 3 года назад

Alfredo BM you are welcome, Thanks foe viewing.

@jwollam 5 лет назад

Thank you for the video!

@notcharles 4 года назад

If you do this using those crimp connectors, leave the bare wire long enough to cross to the other end - the more the wires contact each other as well as the connector, the better. Then again, why not solder them together and be done with it?

@viccat6625 2 года назад

Nice 72 chevy truck and video

@jorgenava8223 6 лет назад

Great video I’m going to do my trailer tomorrow thanks for doing this video 👍

@ljhm6816 Год назад

Great information, thanks 👍🏾

@user8603 6 месяцев назад

Why didn't you switch the light housing right to left and mount your plate above the tail light with the clear window facing upward? The housing is still waterproof and your plate should be illuminated at night.

@kimutairop2847 11 месяцев назад

The light came with three wires. One for grounding , the other for brake and the third for driving light. To which wire should I connect for turn/hazard?

@TheShackHome 11 месяцев назад

kimutairop2847 the trailer wire is pretty basic either 7 wire or 4 wire. In this video my trailer is wired with 4 wire. The yellow is your left turn, Break and emergency flash. Green is your right Turn, Break and emergency flash. Brown is your running lights. White ground. The tail lights connect as directed white is ground green to green and brown to brownj. If colord dont match get a test light turn on your running lights test for what wire turns on the test light do same for left and right signals. thoses will be the break and emergency flash.

@lesfaust9634 3 года назад

I bought the same full light package, ,one of my trailer wires were broken someplace, ,,since yours already worked you could have just bought led replacement bulbs for the existing set up...

@BrianDoolittleAustin 3 года назад

Thanks sir!

@TheShackHome 3 года назад

Most welcome!

@jeffquinn5653 6 лет назад

Nice job. Huge difference. Thanks for posting.

@TheShackHome 6 лет назад

Jeff thank you for viewing.

@Moondog9322 2 года назад

Nice video. Thanks! Did you ever change the center trailer lights too? I'm looking to do same on my boat trailer.

@billygammon5953 4 года назад

White wire to the back thank you that's where I'm making my mistake

@TheShackHome 3 года назад

Billy Gammon you are welcome. Happy to help

@sullyyyy5262 5 лет назад

Excellent.

@TheShackHome 5 лет назад

Sullyyy thank you

@marvinjgerald6007 4 года назад

Great video thanks. I noticed you didn’t completely blur out your trailer registration plates and I was gonna post it to you via secured communication but couldn’t find an email address.

@TheShackHome 4 года назад

Marvin Gerald your welcome and thanks for viewing. No worries i'm not concerned with anything being out in a rural area i know the vehicles that come down our dirt road. My email should be on my channel home page. I'll check you never know it may of got deletes or something.

@christinecabana4169 4 года назад

Love it!!!!

@harrylime5147 5 лет назад

The wires that came with my LED trailer light kit are red white and black. And I I am working on them right now to try to get them to work because I have to use the trailer tomorrow and I will be leaving at 4 AM when it’s dark. I don’t know if it helps or hurts, but I am a retired electrician

@TheShackHome 5 лет назад

Harry Lime sounds like basic wire. Generic wiring one ground one for running light,one for brake & signal. hopefully the kit states which wire is for what sounds like you have it under control info never hurts you never know when someone else may have the same problem good luck and have a safe trip

@harrylime5147 5 лет назад

The Shack I wiring for the lights on the lights, the wires were red black and white. The trailer wires of course are brown yellow and green. I went on this site/RU-vid/and one of the confident guys with a very nice trailer said that the white wire is ground. I found out yesterday that the black wire is ground.. now the lights work fine. If only my two sons would stop accidentally bumping the lights, breaking one of them. This is the fourth set of taillights I have put on my trailer since 2000.

@russudvp 4 года назад

Question, so my existing bulb lighting for my trailer is there. So if I want to change out to LED, with the existing wires will work, correct.

@TheShackHome 4 года назад

Russell Wahrman great question and yes. These are a direct replacement. They should connect to any 4 wire set up. Just be sure to make good ground so you won't have any issues.

@AYALARAMON100 5 лет назад

Thank you Good video

@montellwilliams811 4 года назад

Questions , I followed his instructions step by step & my led lights come on , but will not blink for right or left turn , nor flash for hazard ..please help I have been at this problem for ( week's ) ( note : my trailer is for boats )

@TheShackHome 3 года назад

Montell Williams Id start from the beginning. test the outlet from the vehicle and make sure all terminals work, running light, break light, turn left and right. Then check the colors and match them to the trailer. Most importantly make sure you have a good ground on the trailer. I had a boat and every so often I'd check the ground even if I had to scrape the area of the ground to make sure there was good contact.

@zheloz1 3 года назад

Have trouble figuring the ground wire

@mikhailromanov5833 6 лет назад

I'm converting my S10 into a flatbed and I've got the ones that have the turn signals and brake lights. Is it possible to splice the wires that connect with these to the old tailight wiring harness?

@TheShackHome 6 лет назад

Mikhail for sure. If your taking the bed off these will work fine.

@brentbradley6711 3 года назад

I like the old ones better

@felip3ruiz 4 года назад

My connection input is different

@scottengh1175 5 лет назад

Put new LED light system. Won't light. Manufacturer's tech says I need to buy a LED flasher. Not enough current draw. Really? Or add resistors in line so I am drawing more current?

@TheShackHome 5 лет назад

Scott that makes no sense. LED draws less energy. that's why they are so good. Not sure about newer vehicles. But I have pulled this trailer with my 72 chevy, my brother in laws 03 ford and a neighbors 2012 dodge so i don't know why you'd need a LED flasher. These are basically plug-n-play. Sorry I'm baffled.

@scottengh1175 4 года назад

@@TheShackHome it didn't make sense. But my super clean to bare metal tongue ground wasn't good enough. Drilled a new ground hole in trailer frame and all good. Helped to bench test a light to have confidence that they worked.

@pastorjuanm.woodson3966 4 года назад

Can those lights be mounted on wood

@TheShackHome 4 года назад

Pastor Juan M. Woodson, yes they can just run a ground wire to them. Thank you for viewing.

@pastorjuanm.woodson3966 4 года назад

@@TheShackHome How do you run ground wire there no white wire from the lights

@TheShackHome 4 года назад

@@pastorjuanm.woodson3966 if no ground then you could attach a ground wire to the light or solder a ground wire to a washer attach that to the light then to the wood and hopefully that will ground the light just attach that wire to a ground source

@payasso666 7 лет назад

would you be able to flip them that way you can add your licence plate holder.? and also you know put the left on the right and vice versa. I know the light will be facing up. just a thought..

@TheShackHome 7 лет назад

payasso it can go any way its just what they suggest if you want to flip it and have the LED light facing up shouldn't be an issue. Thanks for viewing.

@robertelliott3096 6 лет назад

The Shack I fucking lvesw2o c12 free er

@curtisnemetz9124 4 года назад

Not sure if anyone else is as dumb as me, but you need to make sure the ground wire is connected to the metal of the trailer... I had mine connected to some metal on a wood piece of the trailer and lights did not work! Watched this video and realized my mistake.

@TheShackHome 4 года назад

Curtis Nemetz don't under estimate yourself. It's common to think connect to metal for ground but the wood acts as an insulator breaking the chain. I'm sure many have done the same. I replace an alternator 2 times, changed out the battery only to have a friend ask about the ground. We took the wire from the battery to the body some sand paper reconnected it an BOOM started right up. Yes I felt really dumb It happens. Great tip for future viewers. you just never know. Thanks for viewing.

@superior3384 7 лет назад

what do the big side things on each side look like. or do?

@TheShackHome 7 лет назад

SLC they are just side markers running lamps.

@superior3384 7 лет назад

The Shack ... oh ok. cool. they look good. I'm going to pick some up

@damienmielcarek356 2 года назад

Not very durable for my use there cheap and get smashed easy I made custom boxes around mine on my trailer with flip down mesh door work very well

@brentbradley6711 4 года назад

Spikey, why hide your plate,,paranoid? I like my old light just fine.

@pixelpadre 4 года назад

bla bla bla bla bla do we really need directions how to drill a hole. god what a drone.

@OO-nd2kn 5 лет назад

Good thing you blurred out your license plate. Did your wife tell you to do that? You know it is mounted on the outside of your trailer for the world to see? Do you cover it when you drive it! It’s funny how people worry about the most stupid things that make no difference.

@jbarb4954 5 лет назад

Orly Oliverio Why the hell do you care?

@brentbradley6711 3 года назад

@@jbarb4954 Paranoid dude

@oldtimer4567 7 лет назад

Really? Scared for years to pull your trailer with conventional, incandescent bulbs but not scared to drive your vehicles with the same bulbs. Yes, that same type of incandescent bulb in your "old" trailer lights is the same as what has been in vehicle tail lights for years & still is in most vehicles?

@stevemildge 6 лет назад

no so with newer vehicles. older vehicles, yes

@patrafferty3512 6 лет назад

bullshit....many newer vehicles have 'em

@philoeolivarria448 6 лет назад

Pat Rafferty even if the newer vehicles have bulbs...its not like any trailer lights...the lens on cars are made so much better....and are alot bigger......what kind of new vehicle are you buying that have dim trailer lights on them...lol...