How to install Android 10(Lineage OS) on Raspberry Pi 3 

Hi can you recommend any Remote to use RPI as Android box?

will not show restart menu

My 3b does the same

I have the same problem, it loop restart. I can see the white screen but it restarts.

I have the same test, the lineage startup goes into a loop, I see the rainbow screen and it restarts, solution?

@@worfred85 Did u find a solution ?

same happend to me. I tried different versions of lineageos and version 14 works on my raspberrypi 3B. But I also still struggle to get the 3B+ running. PiOS has been working on both without problems. It seems that not every Pi (model Pi 3) is working with every lineageos version (model Pi 3).@@worfred85

Same problem here, any solution?

thanks for help

Where is About Device because that does not show anywhere within system settings

just search for "about" and you will find it @@Shalom587

Thank you very much. You saved me a lot of time and effort. Much Appreciate!!

maybe problem qith you SD, use Class 10

same happens to me did you solve this?

Same I think this guy made us damage our raspberry pi 😢

i working on that rigth now, after install PICO have to be patient to resett the screen resolution again

ok after flash keep the sett on 800x 600, take me a lot of time but work better on 720x480.

640x480 its better, ill try swap memory to make it better..

in your android PI press F5 then on the scrren RESTART/ RECOVERY,, with the USB on the PI.. go to Instal,, selecct USB and done

Did you solve it?

He made us damage our raspberry pi

just use an external usb.

You have to tweek the config.txt file. for my XFT2046 I have to add this: {hdmi] hdmi_group=2 hdmi_mode=87 hdmi_cvt 800 480 60 6 0 0 0 hdmi_drive=1 [all] dtparam=i2c_arm=on dtparam=spi=on dtoverlay=ads7846,penirq=25,speed=10000,penirq_pull=2,xohms=150

use ARM 32 android 10 an select Pico

use ARM32,the video is clear bro.. i installed and it work

Same problem here

lineage is picky about displays. Don't recall the exact resolution it requires.

@@HandlesAreDumb_111 so if I get the right resolution then it may work? I guess I'll have to edit something for that.. 🤔

@@adrianmares269 maybe? I don't know your specifics, but in my case- I was trying to do install with the official 7" touchscreen and was getting the same results. Rainbow splash screen, then black for however long I'd let it sit. I found Konstakang's release announcement on the rasp-pi forums and that led me to the release FAQ on Konsta's website. (In my case, and for my next attempt, I'm going to try install on an HDMI display then switch to using software rendering (SwiftShader?) for the touchscreen...)

@@HandlesAreDumb_111 I was using my LED TV plus hdmi, and the exact same thing I'm not sure if it would work, I was stuck in a bootloop with higher versions and as I started going to lower it got to the same problem.. rainbow screen and black screen after. Have you tried different storage options? Usb doesn't work for me, I'll try to use an ssd, hopefully will get something

Same...

solution in pinned comment

READ other peoples: TechnoBOOM 10 months ago (edited) Hey everyone if you are not able to see the developer options go to about tablet and tap on the build number 7-8 times and go back and you will have developer options

reformat the SD, make sure the partition have the space, use class 10.