Millions thabks for this. no need for words if its clear like that you show is, better than every signal one of them so called 'how to install' video out there. Perfection.👍
Great video, Is there any chance that you can make something simmilar for those android 11 head units (snapdragon 662) with canbus installation for audi b8 (a4, a5, q5) (2008-2015)? Thank you in advance. Only way how I was able to power camera was putting 12v from reverse light to CAMERA DET WIRE and from HeadUnit with CAMERA 12 wire to camera. And it takes 2s to go to camera and 2-3 to come back. It's not instant at all. And If I am not mistaking it is not proper canbus reverse camera mode?
Hi I have an issue every time I put my ve hole in reverse with headlights on the radio cuts out sometime I just have headlights on and it cuts out went to over 20 auto elterician can’t find issue
On the amarok 2013. After installed the reverse camera working properly when reverseing. But then i turn left or right signal the sreen display the blank view of camera too.do you know how to disappear this issue. Thank
Everything depends on canbus converter box. In my case connection as above is impossible from simple reason, camera with LEDs consume too much current, and driver just switch off the whole head unit.
Please tell me the year of production of your car,usually you need a CAN decoder and fiber optic decoder .If you have any question please connect us via Email 651329850@qq.com
So I don’t have to ground the camera? I’m getting interference with my signal and then I figured out I have canbus but my ground is wire to my reverse light
I think u dont nee ground on the camera side bc video connection already have ground so if u connect another ground, theres a ground loop and should be the cause of the interference
The ground wire of the video signal is connected to the ground wire of the camera. When you connect the video plug, the camera is actually connected to the ground wire.Some cars have pulsating DC signal when the engine is started. If the video signal interference is serious, you can connect the ground wire of the camera to the steel structure of the car. Because the steel structure of the car is actually the ground wire
@@gmlv9994 i have that problem. Camera working ok, when my car is off. When i start the car, camer is not working proper. Like pulsating stripes... i cant explain you. My english is not so well. Do i need to cut ground wire? Does it work proper then?
No explanation of what he’s doing, or why he’s doing it. How is the average Joe supposed to follow that. A drawing of the connections would of helped a little bit If he had problems talking. Thumbs down from me.
Hi, this video was recorded for the purchase of XISEDO car stereo with CAN decoder, and the customer needs to install backup camera. It is only suitable for cars with CAN decoders. In this method, the backup camera is powered by the CAN decoder.
