Тёмный
No video :(

How to Install Double Din Radio & Backup Camera in 2006-2010 Ford Explorer 

D.M.W Auto Sounds & Systems
Подписаться 677
Просмотров 8 тыс.
50% 1

Installed a double din and backup camera in a 2006 Ford Explorer. Save yourself time and use fuse number 15 in the drivers side fuse box.
Parts used:
Dash kit - Metra 95-5812
amzn.to/3vbrye0
Wiring Harness - Metra 70-5520
amzn.to/48gg3AK
Antenna Adapter - Metra 40-CR10
amzn.to/48hjBT9

Опубликовано:

 

22 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 18   
@WhiteG60
@WhiteG60 Год назад
Thanks for this! Installing a head unit and backup camera in my father's 2008 Explorer tomorrow and this is precisely what I needed! Is there anywhere you know off hand to pull a parking brake signal? I guess I can just ground it and it doesn't matter, but if I can 'do it right' I will. Thanks so much!
@DMWAUTOSS
@DMWAUTOSS Год назад
Depending on the radio type you can just ground it but the newer double din name brand radios you absolutely have to connect it to the parking brake ground wire. It will be right over top of the parking brake pedal coming out of a switch
@glennbabicky6698
@glennbabicky6698 10 месяцев назад
Any luck finding the factory wiring at the head unit? I couldn’t locate constant 12v. Also where does the red wire at the camera end go?
@DMWAUTOSS
@DMWAUTOSS 10 месяцев назад
Constant 12v at the radio should be a blue/red wire. The red signal wire at the camera will act as the new power wire so it needs to be connected to the red power wire of the camera
@ConditionZero76
@ConditionZero76 4 месяца назад
Did you have to tap into the rear back up light ?
@DMWAUTOSS
@DMWAUTOSS 4 месяца назад
No
@ConditionZero76
@ConditionZero76 4 месяца назад
@@DMWAUTOSS Thanks
@jpreza
@jpreza 9 месяцев назад
I noticed that coming out of the factory radio, there are 2 wiring harnesses. Did you only need to connect one wiring harness?
@DMWAUTOSS
@DMWAUTOSS 9 месяцев назад
Yes, you only need to use 1
@Chico-jm8sl
@Chico-jm8sl 4 месяца назад
Did you have to buy a different antenna connector? My new radio doesn't work woth the factory explorers ? Thanks
@DMWAUTOSS
@DMWAUTOSS 4 месяца назад
Yes, all the parts used are in the description
@audreciashephard4106
@audreciashephard4106 Год назад
Did you order from Amazon?
@DMWAUTOSS
@DMWAUTOSS Год назад
Yes
@DenishaSykes
@DenishaSykes Год назад
Hey question. If I use the fuse my wire doesn’t reach all the way to the back did you use an extension or anything?
@DMWAUTOSS
@DMWAUTOSS Год назад
Run the wire from the fuse to the trigger wire on the yellow RCA cable behind the radio. Then connect the power wire at the camera to the trigger wire on the RCA cable at the camera
@56igadget
@56igadget 7 месяцев назад
This video didn't help much how do you wire a camera in don't you have to wire into the backup lights
@daveprice6817
@daveprice6817 Год назад
What size screen is that?
@DMWAUTOSS
@DMWAUTOSS Год назад
7 inches
Далее
2006-2010 Ford Explorer Aftermarket Radio Install
21:53
#JasonStatham being iconic
00:38
Просмотров 271 тыс.
2006 - 2010 Ford Explorer / Mountaineer Radio Install
12:30
2006 Ford Explorer - Replacing Car Radio
8:52
Просмотров 65 тыс.
#JasonStatham being iconic
00:38
Просмотров 271 тыс.