How to Install Dzus Rails: Tech Tip Tuesday

Подписаться 113 тыс.

Просмотров 70 тыс.

50% 1

Dzus fasteners can be particularly difficult to install. If you’ve ever helped someone take a hood or body panel on and off that was not right you understand the frustration of a mis aligned fastener.
Our sure fire way of installation will make sure you don’t fight that on your new hood, trunk or other body panel. These principles carry over to everything.
For our Dzus rail kits for Fox Body Mustang, Third Gen Camaro, S10, Gbody and more, this information makes the job so easy! These kits can be found at the link below!
www.motionraceworks.com/colle...
Thanks for tuning in! Don’t forget to hit subscribe

Авто/Мото

Опубликовано:

30 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@matthewmcclintock5806 4 года назад

Hell yeah brother I see that freedom factory shirt your wearing I've already paid for the paper view to watch it I can't wait it's gonna be so rad

@MotionRaceworksOfficial 4 года назад

Hell Yeah Brother! Can't wait to see it either!

@ScottB 4 года назад

I’ve done this before and it’s easier if you use a die grinder and a rotary file (burr bit) to put the Dzeus button holes in the hood. No need to remove the hood for each fastener and if the pilot hole is slightly off, it allows you to adjust for a small error.

@cturboaddict 2 года назад

This was an AMAZING TIP! Made the install way easier/faster. Uploading a video of your tip now! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KPAqcY7IMW8.html

@bobbywitcher5042 3 года назад

Your and awesome teacher I love tech tip Tuesday keep thanks!

@trophbrwntrouthunter 2 года назад

Many pearls in this video, sounds like you’ve learned by doing👍

@stevel1584 4 года назад

Excellent video, thanks !

@jeremyeubanks2387 4 года назад

That's a great idea making the rails black.. nice

@MotionRaceworksOfficial 4 года назад

Its all in the details!

@K.K.808 3 года назад

Excellent video!

@markfuchs9385 Год назад

Excellent video...

@bradley750ho 4 года назад

Thanks for the video.

@swatson0061 3 года назад

Awesome content

@mikecondoluci53 2 года назад

GREAT VIDEO THANK YOU

@Reject06 4 года назад

good boy in action at minute marker 2:23

@dragbikedemon 4 года назад

Making it look easy!

@davidzimmer2694 3 года назад

Great video. You guys should consider doing this for a living....LOL. Good luck at the Christmas tree race Doug.

@Sleeper_Solutions 2 года назад

At 2:25 the most wholesome moment happens and nobody knew.

@deankay4434 3 года назад

I am slightly confused unless the company was bought and they changed the name, but in the late 70’s these where called “DUZ” fasteners. 1/4 turn and these popped off a curved spring that held tight. From front ends of school buses to motorcycles fairing, much less the race car circuit where they where designed for. If my wife has not yet found my stash of HotRod magazine, they had articles showing there use. ASE Master Tech since 1978 - Retired

@BOOT 4 года назад

Been planning on getting some dzus rails for my fox.

@danmackey9462 4 года назад

Doug love the videos. And the freedom factory shirt. What about the thickness of the head of the rivet that holds the springs in. Wouldnt that have to be taken into account as they sit higher than the rest of the rail and the hood would then sit on the rivets?

@twistedkidmotorsports9093 3 года назад

Circle templates from the yard store works great for stuff like that

@Seantubes 3 года назад

Really wish you would have shown doing the front two on the sliding rail. I'm trying to figure out how to do that on a 99-04 mustang.

@mikebrown1408 4 года назад

Being as though you're making the rails you could make another step in the program and have a center line of the hole witness line

@deadestduck 4 года назад

Love your boxers. I have had 6 of them

@patfrexit 3 года назад

Good job ...

@lorenzohinojos4559 3 года назад

The Irony is that we are being taught how to install Dzus clips for a hood, while wearing a shirt of a guy who will never use a hood lol

@cturboaddict 2 года назад

Any tips for getting the rivets in to the left and the right of the slots? (Besides removing all of the springs) I'm using a .125 hood, and I can't get the rivet gun in there to install the rivets. The springs are in the way.

@devidzus 2 года назад

🤘

@richardscarlett7942 4 года назад

I wonder how much of that sheet metal debris went into the turbo inlet. You could just use another Dzus rail at the back of the hood and cowl. Mount the rail on the cowl side as you did with the fenders and you have a perfect shelf for the back of the hood to rest on

@MotionRaceworksOfficial 4 года назад

Definitely a good idea. That is just a mockup turbo we used when building our Coyote Turbo Kits, so don't worry. No Turbskis were harmed in the filming of this video lol.

@andrestnt 4 года назад

@@MotionRaceworksOfficial yall have a turbo kit that fits an SN95 with a Maximum Motorsports k-member?

@nathantiller889 4 года назад

Freedom Factory brother!

@builtforspeed5274 2 года назад

Can I put the fuel regulator close to the fuel tank so I just have the feed line go all the way to the front and have a short return line?

@SoftiesTruck 11 месяцев назад

How much weight do you save going from a stock foxbody hood to a pin on hood?

@chadb1144 3 года назад

Do you guys offer a universal rail u really need some to put the back window in my 69 firebird

@ziegle9876 3 года назад

If you used proper squeezed rivets on the hood, there is no need for holes to accommodate the stick-out of the pop rivets...

@stumpy259 3 года назад

Do the "Webster wobble" lol

@ncd1966 4 года назад

I need some for a second generation camaro

@MET90LX 4 года назад

Lol my hood can be a pain to put on. The hood I bought used and I put my tabs on myself.

@calebclevenger9592 3 года назад

So el torro has already been built once?

@anthonyfulmer 3 года назад

Do you have dzus rails to fit 1985 ford ranger

@JoeDaleKeys Год назад

What about the nose pieces?

@hummv8 3 года назад

Good video, but the flag above the doorway is backwards. Blue field should be on the left.

@joef.2908 3 года назад

If I can ever find a light weight hood for my 65 impala..

@shanecregger9666 3 года назад

about to order these for my fiberglass hood,but I'm curious what stops the rivets from pulling thru the hood?

@errolgumusdere7853 3 года назад

DONT BE INTIMATED GUYS. YOU DONT NEED MICROMETER TO INSTALL. YOU DONT NEED FANCY TOOL, USE ANY SPRING, YOU CAN ADJUST THE SPRINGS WITH NEEDLE NOSE PLIERS......