Very generous with the resin. If you buy their estimate for i.e. 20sqm, make sure you double the quantity based on the thorough guidance this gives you....
I’m a DIYer and did my own garage roof in GRP a few years ago, was easy enough and been perfect since. There are lots of places where corners could be cut, follow the instructions to the letter and you get good results.
@@kiteless1 thanks a lot! Very kind of you to reply me back! I am not a good DIYer, can you pls share some more details on how and which kit I should order.
if you get a fibreglass flat roof installed get this firm to do it .or another good roofing firm a lot people who do these roofs look at a video like this 15 mins long and just slap the fibreglass down . no reinforcing joints ,no fluffy edges no gadget to see the temperature i know i rip a lot of these up were there not done well .
I have a fibreglass roof which needs repair. I had a leak last year and got someone who did a fibreglass paint which fixed the issue, but need to fix it properly. Do you have any video which can help with the repair.
The product is probably good, but make sure you get a FLAT roofing contractor to do the roof. I’ve put loads of fibre glass roofs in the skip, mainly due to the installer not using enough material and don’t have a clue how to do detail work.
I don't like it i prefer a more flexible approach as the timber is always moving.. i used that lava 20 i thought it was an excellent job and easy to use.. and doesn't stink the place out..
As a roofer I have come across so many leaky fibreglass roof systems. I just don’t trust them and never recommend anyone to have them installed. Much prefer single ply, rubber or resitrix
@@stuartjones2242And bad advice videos on RU-vid making out it’s easy to do when it’s not easy. You can’t learn how to fibreglass off a video just you you can’t learn to be a nuclear engineer by watching RU-vid videos. Trades like this take years to learn and perfect.
@@GRPLiningServices just like in your videos its more hints and tips to help. We both know its not as easy as it looks and it takes time but everyone has to start somewhere dont you agree??
Hi all I've bought all the equipment to start my fiberglass roof on my garage . I've bought 18mm osb3 . My only trouble is there doesn't seem to be a rough side both sides seem very smooth? Should I sand it or try and return it thanks in advance
@@hewoguys2506 my apologies yes you can use 8x4x18mm OSB but mate sure it’s the correct grade their are many different grades when purchasing ask the tell the person behind the counter what’s your using it for
Very true @GrpLiningservices you are correct, i dont do alot of filming like you and it was a slip of the tongue thanks for pointing that bit out it will be helpful to everyone watching.