Тёмный

How to install H4 or 9003 LED Headlight Bulbs - Tips and Tricks from Headlight Revolution 

Headlight Revolution
Подписаться 275 тыс.
Просмотров 314 тыс.
50% 1

All H4 Style LED Foward Lighting Upgrades: headlightrevolution.com/led-f...
In this video, Chris shows how to install and aim some of the most common LED H4 and 9003 bulbs on the market!
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Fitment guaranteed! If it doesn’t work, we will solve the problem for you. We strive to give an excellent customer service experience. Our dedication to delivering on that promise is backed by a no-hassle return policy. We’ll provide a full refund on products returned within 30 days, no questions asked.
All Lighting Upgrades For Your Application: www.headlightrevolution.com/?...
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Note: This video is for educational purposes only and may show street-use content with products that may not be DOT compliant for use on public roads. The video is not intended to imply vehicle-specific street legality. LED and HID bulbs are street legal in the USA for fog light use and not in low beam or high beam headlights because they are not compliant with DOT / FMVSS108. When looking for on-road-use headlight upgrades we recommend DOT-compliant headlight housings, not bulb replacements. Certain specialty vehicles strictly limited to off-street use and not having DOT registration or license plates may use these products exclusively off-streets. International street legality varies by country. For detailed clarification on-street use, go to www.headlightrevolution.com/s...
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Other videos that we recommend watching:
💡 Lighting Color Explained: • HID Color Temperature ...
💡 Are LED Bulbs Brighter than Halogen? • 100W Halogen VS LED Bu...
💡 Are LED Bulbs Brighter than HID? • HID vs LED - Which is ...
💡 LED Bulbs Brightness Shootout - which bulb is the brightest? • Best and Brightest? We...
💡 Which HID Kit Color is the brightest? • Which HID Color is the...
💡 The TRUTH about LED Bulbs! • The Truth about LED bu...
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
For the best LED automotive lighting selection in the world, check us out here: headlightrevolution.com
If you have any questions about any of our products, email us at Sales@HeadlightRevolution or give us a call at (218) 755-5200!
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Find us on social media!
TikTok: / headlight_revolution
Facebook: / headlightrevolution
Instagram: / headlightrevolution
Pinterest: / headlightrevolution
Twitter: / headlightrevolu
LinkedIn: / headlight-revolution
We Do Lighting Better Because We Test!

Авто/Мото

Опубликовано:

 

29 окт 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 283   
@thewcalame506
@thewcalame506 3 года назад
Explaining the shield is something that many others have neglected. Thank you so much. This is by far the best explanation that I have viewed.
@HeadlightRevolution
@HeadlightRevolution 2 года назад
Glad it was helpful!
@mudzryrahim9130
@mudzryrahim9130 2 года назад
@@HeadlightRevolution 0
@CptSlow89
@CptSlow89 2 года назад
@@HeadlightRevolution True but on my motorcycle, high beam shields are opposite that in your video and light is great.
@yuchub7389
@yuchub7389 Год назад
The best tutorial videos here in youtube🔥
@tiggertail
@tiggertail 2 месяца назад
You saved me! I am crying out of joyI found this video brother !
@ChrisOnline1
@ChrisOnline1 4 года назад
It was a pain in the ass when I tried installing the led bulbs on my sister's Yaris and trying to figure out the proper alignment. Now I finally understand the proper way to align the bulb. Thanks!
@wildscorp
@wildscorp Год назад
This video was big time helpful! I watched a lot of videos trying to figure out how to upgrade my 2002 Tundra to led headlights and yours was the only one that solved the mystery on how to incorporate the dust cover by showing how the collar comes off the led bulb. I still had to modify the dust covers some to allow the bulbs to fit right and yet, now the leds work great and still have the protection of the OEM dust cover. Thanks a lot! 👍
@eeec7
@eeec7 10 месяцев назад
Should I cut the dust covers a little bit? If so, where?
@905nite
@905nite 4 года назад
Thank you. The 9003/H4 bulb for me was the hardest bulb I've ever had to install. Particularly on a 2012 Honda CR-V EX. 🤬
@ericbateman5491
@ericbateman5491 3 года назад
Perfect explanation of the H4. Thank you!
@HeadlightRevolution
@HeadlightRevolution 2 года назад
Glad it was helpful!
@tommyo777
@tommyo777 2 года назад
Thanks! This, and your video about LED types has helped me make an informed purchase and I expect, a smooth installation/alignment.
@HeadlightRevolution
@HeadlightRevolution 2 года назад
Glad we could help!
@davidnhowe6628
@davidnhowe6628 Год назад
Thank you for explaining on the rubber cover had put mine without the cover just got back from putting it on lol
@rontanuecoz
@rontanuecoz 4 года назад
now i know how to identify if my led bulb is correctly installed how does it looks like with the stock halogen light... thanks much... love watching all your videos!!!
@HeadlightRevolution
@HeadlightRevolution 4 года назад
I'm glad we could help out!
@DVDiclan
@DVDiclan 4 года назад
Nice informative video. Personally would have liked to see some beam pattern comparisons of the different H4 bulbs as I can't find any of your bulb shootouts that feature H4 bulbs and I'm thinking of getting the new GTR Lighting bulbs. I'd like to point out that when I installed LED H4 Bulbs in the past, I found out that the alignment isn't supposed to be perfectly straight 12 o'clock when I referred to the stock halogen which was slightly off by about a notch and this gave me the best beam pattern. This may be vehicle specific but still something to look out for. Keep up the good work guys.
@brat_paq
@brat_paq Год назад
I just learned from this video that the shield is facing up I thought that should be easy, just point it at 12 o clock. Now I read your comment and it's not exactly 12 o clock. Now I think I should focus the original halogen on a wall and trace the pattern on the wall. Then put the led bulb and make sure the pattern are the same as the original halogen.
@gelan1212
@gelan1212 9 дней назад
Thank you very much, it’s the only clear explanation I’ve ever found.
@HeadlightRevolution
@HeadlightRevolution 6 дней назад
Glad it helped!
@Panda.0038
@Panda.0038 9 месяцев назад
This video is 2 years ago but it still helped me thanks
@jimdimaano9181
@jimdimaano9181 2 года назад
I'm glad I found this video. Thanks, man!
@HeadlightRevolution
@HeadlightRevolution 2 года назад
Glad it helped!
@h0sx
@h0sx 3 года назад
I have chevey cruze 2017 middle east H4 bulb, it works installing LED headlights 🤩🤩🤩🤩 Thank you Chris 💜
@HeadlightRevolution
@HeadlightRevolution 2 года назад
Nice 👍
@greatmystery11
@greatmystery11 3 года назад
Thanks for your efforts, they are appreciated!
@HeadlightRevolution
@HeadlightRevolution 3 года назад
Not a problem, we are always here to help! Let us know if you need anything else!
@Pm9x6jh
@Pm9x6jh Год назад
Awesome, helped me install my bulbs the right way
@dand3841
@dand3841 2 года назад
Great video. Thanks for taking the time to make it.
@HeadlightRevolution
@HeadlightRevolution 2 года назад
Thanks for watching!
@AnDroid-cq3sr
@AnDroid-cq3sr 4 года назад
Thanks you so much to solve misery between the lock pin and dust cover .
@HeadlightRevolution
@HeadlightRevolution 4 года назад
Thank you for watching!
@bitokstv777
@bitokstv777 5 месяцев назад
Thanks a lot sir. On your demo, I easily installed my new LED headlights...
@HeadlightRevolution
@HeadlightRevolution 5 месяцев назад
Glad it helped
@keithdavison7357
@keithdavison7357 4 года назад
Thanks for the video. I recently bought another type of led that was three sided. So wasn't a issue. I just bought a new set and it had the half moon cup and I had known idea if the cup went up or down. I would of assumed up to keep the low beam pointed towards the ground. But you say it goes under. Thx
@03Lorac
@03Lorac 9 месяцев назад
The best video. Thank you!
@murry001
@murry001 4 года назад
THANK YOU! I was wondering how to get them installed properly :) :) :)
@HeadlightRevolution
@HeadlightRevolution 4 года назад
You're very welcome, thanks for watching!
@bobmyrick3564
@bobmyrick3564 Год назад
Howdy, Outstanding presentation, you sir have an excellent way to explain these lighting products. Thank you
@HeadlightRevolution
@HeadlightRevolution Год назад
Thank you!
@lfc214
@lfc214 2 года назад
the meaning of perfect can be found in this video 👌👌👌
@HeadlightRevolution
@HeadlightRevolution 2 года назад
🤘🤘🤘
@rio20d
@rio20d 4 года назад
got some questions, if you look at the recent release of Toyota cars like the corolla and rav 4 , seems like they all uses LED headlights but interestingly enough they use both the typical LED projector headlights which has been around for a while now but also a parabolic led headlamps ( which is not projector base but using reflector in it). What's your view on that? I would like to know, thanks
@squirrelkiller3589
@squirrelkiller3589 3 года назад
Great video, quality content
@HeadlightRevolution
@HeadlightRevolution 3 года назад
Thank you, glad that you liked it!😄
@lenroythomas9766
@lenroythomas9766 6 месяцев назад
Love this information very helpful 👏 👌 👍
@HeadlightRevolution
@HeadlightRevolution 6 месяцев назад
Glad it was helpful!
@360.Tapestry
@360.Tapestry 6 месяцев назад
thank you! i needed to know how to navigate that dust cover
@HeadlightRevolution
@HeadlightRevolution 5 месяцев назад
No problem!
@ClarkSaintil
@ClarkSaintil 6 месяцев назад
Good job, verry important
@jakeconcienne6274
@jakeconcienne6274 4 года назад
Thank you!
@HeadlightRevolution
@HeadlightRevolution 4 года назад
Thank you for watching Jake! -Chris W
@muhdizhar8746
@muhdizhar8746 9 месяцев назад
Thanks for video
@toomasbaunis343
@toomasbaunis343 Год назад
Great job explaining led installation procedures. I've got a 1986 Winnebago motorhome with sealed beam headlights. I purchased new 4x6 Halogen lenses only. I can now fit led bulbs into the lamps, but the sealed beams have a 2 blade and a 3 blade socket. Is there an accessory pigtail available on the aftermarket to complete the connection so I can have led lights? Can i get a led pigtail from a dealer trim off the old bladed sockets and rewire to complete connection?
@csvpresents8978
@csvpresents8978 Год назад
Very good detailed explanation...thank you.
@HeadlightRevolution
@HeadlightRevolution Год назад
Glad it was helpful!
@carlosdaudet6821
@carlosdaudet6821 4 года назад
Great video! I would like to see the beam pattern using same brand and type of led bulb in both the two headlights in this video. Specially the Honda, comparing halogen beam pattern with led beam pattern
@HeadlightRevolution
@HeadlightRevolution 4 года назад
We will add that to our list of videos!
@marcomerito6049
@marcomerito6049 2 года назад
Super! Great Video
@HeadlightRevolution
@HeadlightRevolution 2 года назад
Thank you very much!
@anm0604
@anm0604 3 года назад
this is the best guide
@GOD1SF1RST
@GOD1SF1RST 2 года назад
Very good video. Thank you
@HeadlightRevolution
@HeadlightRevolution 2 года назад
Thank you too!
@elbertkim55555
@elbertkim55555 Год назад
This is awesome!
@HeadlightRevolution
@HeadlightRevolution Год назад
Thank you for the supportive comment!
@DanielLee-qy1yu
@DanielLee-qy1yu 2 года назад
Thanks Bro Really helped
@HeadlightRevolution
@HeadlightRevolution 2 года назад
No problem 👍
@libborr
@libborr Год назад
Thanks much for help. Before watched this vid I installed them and it dazzles drivers too much. Do you think I should turn around them?
@HeadlightRevolution
@HeadlightRevolution Год назад
Yes please make sure to check the adjustment of your headlight.
@tommygomez6298
@tommygomez6298 11 месяцев назад
Great video! I have a question... Do all H4 bulbs have both high beam and low beam?
@nightrider4594
@nightrider4594 8 месяцев назад
Thank you.
@dipankardas1760
@dipankardas1760 4 года назад
Have you done any video or comparison of hikari ultra led h4.
@KANEandLYNCH3
@KANEandLYNCH3 Год назад
I’m curious: my dust cover doesn’t have a hole in the center, and is just a cap that closes off the housing. How do you recommend navigating that with an LED bulb’s heat sink and cable? Is it advisable to just not use the dust cap?
@ryansingh6152
@ryansingh6152 2 года назад
Thank you for the beam explain
@HeadlightRevolution
@HeadlightRevolution 2 года назад
No problem!
@InBoostWeTrust7MGTE
@InBoostWeTrust7MGTE 4 года назад
i was so hoping to see the light output of this H4 bulb
@HeadlightRevolution
@HeadlightRevolution 4 года назад
Check out our Toyota Tundra bulb shootout video, It uses H4! -Chris W
@marko9138
@marko9138 4 года назад
Will this work with the headlight leveling dial on a 2020 Toyota Tundra?
@vinoth20294
@vinoth20294 4 года назад
Please explain about headlight base. And which one is commonly used in H4 bulb 43t or 45t? What about H7 bulb..?
@eladioleon160
@eladioleon160 3 года назад
Hi I’m getting the led auxito h4 led 9003 to replace the old bulbs in my Chevy bel air 57 are they will fit?
@astindersinghera766
@astindersinghera766 2 года назад
Great video, well explained. What led bulb do you recommend for 2004 Mazda Tribute, it uses H4/9003 bulbs. Also would like to have led bulbs that have low and high beams both. I can’t find led bulbs that has both beams. Is that by design? Thanks so much
@HeadlightRevolution
@HeadlightRevolution 2 года назад
I would suggest reaching out to our CS team so we can go over some options with you! 218-755-5200 Sales@HeadlightRevolution.com
@moazdaza7275
@moazdaza7275 2 года назад
Perfect video! so informative and to the point! one question, H4 (7,11 etc) are those numbers different sizes? (like do h4's have a shorter LED base? in a way that the LED would be in the same sweet spot to be focused by the housing just like the original Halogen light? ) or are these numbers for a different power/higher level/quality etc.?
@HeadlightRevolution
@HeadlightRevolution 2 года назад
These are different, the base of the bulb, the plug, the LED placement, etc, will all be different based on the size of the bulb. With the stock halogen bulbs, this number could mean a difference in power as well though. For instance, 9006/9012 are the same minus the top tab on the bulb being a little wider and the 9012 generally uses 10-15w more power. It is common for people to trim the larger tab on the 9012 bulb to fit into a 9006 housing since the 9012 is brighter.
@moazdaza7275
@moazdaza7275 2 года назад
thank you so much for explaining, sharing your info/knowledge and for your time! May Allah Bless you and guide you to what is best for you in this life and in the hereafter! ❤
@shawngixxer
@shawngixxer 3 года назад
Hi, my 2014 Honda CR-V calls for 55/60 watts, if I replace the bulbs with 100/90 watts if my wires get to hot over time?
@user-ys4rg4xs5l
@user-ys4rg4xs5l 2 месяца назад
very good
@justatiger6268
@justatiger6268 4 года назад
Thank you for this great video. However, I would like to know a bit more about the differences between them. Specifically, ones that have fans and those that don't; are the fans going to accumulate dust and break? Will the entire LED bulb then overheat and simply stope working? And conversely, are the fanless designs better in this respect or worse on account of poor head dissipation?
@HeadlightRevolution
@HeadlightRevolution 4 года назад
The fan based bulbs typically are brighter because they can be run harder. We used to see more fan failures when LED bulbs first came out a few years ago, The new ones work a lot better and it’s almost entirely a non issue. I’d personally only run a fan based bulb now for maximum brightness. -Chris W
@justatiger6268
@justatiger6268 4 года назад
@@HeadlightRevolution I feel so stupid for writing this. I've seen your other videos now and i plan on watching all of them because they are very good indeed. Thank you Chris!
@HeadlightRevolution
@HeadlightRevolution 4 года назад
No problem at all, That is why we are here! Let me know if you need help with anything else.
@socal_gambler
@socal_gambler 4 года назад
Are you going to do a H11 video?
@parthap2944
@parthap2944 3 года назад
Please tell me how to Install an LED headlight in Yamaha FZ V2 with upper and lower beam properly working .
@HARRUMPH-SAL
@HARRUMPH-SAL 2 года назад
Great points on the shield and bulb positioning. My son's 99 Camry uses 9003 bulbs, which we switched to LEDs. They are "4 side" bulbs. Is there a proper way to identify on the bulb which way they install? Does it matter? Thanks!
@HeadlightRevolution
@HeadlightRevolution 2 года назад
4 sided bulbs will not focus properly, if you're going to run them it doesnt really matter how they face in there.
@craigk5505
@craigk5505 Год назад
I installed the SEALIGHT H4/9003 LED Bulbs on my honda element. They look great but when the truck is turned off they still give off a low glow for hours. Not sure if it's power stored on the driver or a low current. Truck starts up fine but still concerned
@eddiemaranan6790
@eddiemaranan6790 Год назад
Thanks
@eugenecastro
@eugenecastro 3 года назад
This is a great video to watch prior to installing the h4 9003 led lights. I was able to install it properly with your video. The only issue i have after installing my led is that its always ON even when the switch is OFF and the AUTO doesn’t work as well. Basically it’s always ON. Any advice on how to fix it would be much appreciated. Thank you
@brian_2040
@brian_2040 3 года назад
Eugene, you must be referring to the daytime running lights. There are ways to turn them off. But it's a safety thing, I'd leave them on, it can't be that bad on the bulbs.
@Ben24-7
@Ben24-7 Год назад
I bought some cheap no brand leds H4 bulbs and when switching from low beam to high beam there was hardly any difference, is that normal for all Led bulbs , or is it because I bought cheap knock off's, Thanks for the video
@JOHNMINKA
@JOHNMINKA 3 года назад
i have fitted a cob led bulb to my motorcycle i get low beam i don't get high beam . i notice if not enough power on battery it switches to low in instructions so i put charger on to a battery doing 13.3 volts STILL NO CHANGE only get low beam could it be a faulty bulb or is it not the same connections as a h4 socket. regards john
@derekhuber3392
@derekhuber3392 3 месяца назад
A video of the Morimoto 2Stroke 4.0 would be nice since it has a square body now.
@HeadlightRevolution
@HeadlightRevolution 3 месяца назад
Will require custom wiring and 1x Ford PN# 8U2Z-14S411-AAC. See Install Guide for more information.
@abdulwahidchangazi
@abdulwahidchangazi 4 года назад
Please review the high beam offroad (drifter) headlights ... Thanks
@HeadlightRevolution
@HeadlightRevolution 4 года назад
We'll add them to the list!
@BulletSpoung
@BulletSpoung 4 года назад
In the US we have more Toyota RAV4s on the road than any other car or SUV made yet you have no RU-vid video on them. We have a 2015 RAV4 and would like to replace the H/L and driving lights with LEDs but I can't find any good info.
@richardstamper5630
@richardstamper5630 Год назад
I have seen some LED H4 lamps being offered locally but they say it needs an adaptor kit? Looking at your example I can't see any adaptor. The shop tell me that if plugged directly into the old plug then the voltage is too high but it doesn't say anything about that on the packaging. Hope you can help.
@HeadlightRevolution
@HeadlightRevolution Год назад
Never heard of that, almost sounds like a gimmick to sell you an extra piece!
@johnkolar8466
@johnkolar8466 Год назад
I got termitor 9003 led bulbs for my 04 tundra installed them now my high beams don't work however if I put one halogen bulb in and one led bulb my high beams work again it don't matter what side any ideas
@erickpalos23
@erickpalos23 3 года назад
You mentioned a shield, how about if my new led buld doesn't have it? Should i just place it facing horizontal?
@HeadlightRevolution
@HeadlightRevolution 3 года назад
You should still place that so that the LEDs are facing left and right! It is very rare that there is a housing that needs them aligned in a different position!
@dann5480
@dann5480 17 дней назад
Great video. I have a question. I got the dust covers on after the LEDs so that the fan assembly and heatsink are inside the rubber dust cover and completely sealed up. Only the wire is protruding which I also sealed with electrical tape. Will it cause issues with overheating? Is it important for the fan to be exposed to outside air? Appreciate your videos a lot. Thanks.
@HeadlightRevolution
@HeadlightRevolution 17 дней назад
No, you don't have to worry about overheating! We do recommend using the dust cover and having the fan enclosed in the headlight.
@dann5480
@dann5480 16 дней назад
@@HeadlightRevolution Thanks!
@NewAdventureBlack
@NewAdventureBlack Год назад
Can I install H4 LED in H13 halogen headlight? What I have to change? The reason I ask this is because I want to use a producer who make only H4 LED not H13 LED. Thanks!
@shanefoote4808
@shanefoote4808 4 года назад
Should show what to do with the extended cable and plug length on the LED’s...
@HeadlightRevolution
@HeadlightRevolution 4 года назад
Depending on the headlight and the truck, You can either fit it into the headlight with the factory dust cover or zip tie it neatly outside the headlight. -Chris W
@tjbay13
@tjbay13 3 года назад
yup. im sittin here trying to plug the damn thing together and it doesnt want to fit. so, for starters, that sucks. would like to see it demonstrated.
@RomboutVersluijs
@RomboutVersluijs 10 месяцев назад
Why does the lee bulb have such a long cable. Won't that cause issue in wet conditions?
@SS-gc6bp
@SS-gc6bp Год назад
Can I change the bulb only on the same fitting/housing on a fiat 500 or do I need a new housing ?
@HeadlightRevolution
@HeadlightRevolution Год назад
You can just change the bulb!
@javierpenarandach.1756
@javierpenarandach.1756 6 месяцев назад
Great video! Still, I simply don't get it, why is it so many people and reviews indicate light bulbs to be h4/9003? I mean from what I understand they are different, like h4 cannot replace 9003 or viceversa, am I wrong?
@HeadlightRevolution
@HeadlightRevolution 6 месяцев назад
In the LED world, they can! The connectors are the same, but the bases would be slightly different. With LEDs, you just get a universal base for both applications.
@josephcedatoljr.7562
@josephcedatoljr.7562 4 года назад
Could you help with my Opt7 Flux v2? I have a 2009 Tacoma and have them installed as you showed. However, I noticed that there is no seal other than the tip seal. I am constantly getting flashed for having high beams on. My adjustment with my OEM lights is fine. Is a readjustment needed? I will admit they ARE bright. Also, when I put my high beams on, there really doesn’t seem to be any change in the light. Any comments? Thanks.
@HeadlightRevolution
@HeadlightRevolution 4 года назад
You should always readjust the headlights after installing new ones, Especially if you’re getting flashed. It may not seem like they move much, But they do!
@arkhamvida9479
@arkhamvida9479 3 года назад
My 2011 Kia Soul doe not have a dust cover, but an overall cap that goes over the light mounting. What options do I have to fix this? Do I put the cover on again? Or leave it open? I didn't see anything in your video about this.
@HeadlightRevolution
@HeadlightRevolution 2 года назад
No need toadd one if it doesnt come with one!
@grahambate3384
@grahambate3384 3 года назад
sweet thx
@CptSlow89
@CptSlow89 2 года назад
My h4 leds were instaled with up and down shield and it was fine. Now I bought the same set and pattern looks weird and low beam is so bad. I will try to turn the shields to 3 and 9 position.
@HeadlightRevolution
@HeadlightRevolution 2 года назад
Yep!
@CptSlow89
@CptSlow89 2 года назад
@@HeadlightRevolution Tried, they locked somewhere in between 9 and 3 but not exactly 9 and 3.
@berkeakdemir3515
@berkeakdemir3515 3 года назад
Hi there, which brand would you recommend for me to use for my car? I want the best LED. (My bulb socket is for h4)
@HeadlightRevolution
@HeadlightRevolution 2 года назад
Reaching out to our CS team would be the fastest way to get some help, give us a call or email! 218-755-5200 Sales@HeadlightRevolution.com
@kokotiong
@kokotiong 3 года назад
Do you have to modify the dust cover to go over the Morimoto on a 2000 Toyota 4Runner? It doesn't seem to fit over the fan?
@HeadlightRevolution
@HeadlightRevolution 3 года назад
You may have to modify that dust cover, and some vehicles just do not work with those LED bulbs. If you are having trouble with that, just shoot us an email and we will be happy to help! Sales@HeadlightRevolution.com
@christiannefarias4923
@christiannefarias4923 11 месяцев назад
How about the weather protector? Do we need to put it back?
@HeadlightRevolution
@HeadlightRevolution 11 месяцев назад
Yes, the dust cover should be reinstalled.
@wkduff
@wkduff 2 года назад
Thank you for explaining the shield but I'm trying to figure out where you plug it into. There's no RU-vid videos. How to plug these in.
@HeadlightRevolution
@HeadlightRevolution 2 года назад
If you are referring to the dust cover, it just screws into the headlight housing.
@wkduff
@wkduff 2 года назад
@@HeadlightRevolution no the cable, I went to Canadian Tire and they said this would work in my car. I cannot find the plug to install it in a 2010 Kia soul.
@benson098123
@benson098123 4 года назад
Could you do a test of 9003 gtr ultra 2 bulbs?
@HeadlightRevolution
@HeadlightRevolution 4 года назад
We have a few videos coming out on those bulbs, I believe one of them is 9003 based. -Chris W
@vman78vk
@vman78vk 4 года назад
I have a 2006 sentra and bought a Beamtech LEDs H13, when I installed the bulbs and was turning them to the right I was expecting some sort of a snap or a tension of some sort. Nothing, so I just left it like that, and ofcourse when I drove to work, after 25 miles the bulb came out of its housing and just dangled there. Anything I can do to fix this ? Thanks.
@HeadlightRevolution
@HeadlightRevolution 4 года назад
It sounds like that may be an issue with the bulb itself. I'd reach out to who you purchased them from, and see if you can get a replacement.
@takeapieandrun
@takeapieandrun 2 года назад
Converted my motorcycle from H7 to H4.. needed to know which way the shield faces. Thanks
@HeadlightRevolution
@HeadlightRevolution 2 года назад
The shield should face open side up!
@101shadowstar
@101shadowstar Год назад
I have a 01 pathfinder so I just wanna know what do I do wit the wires feels like it’s not all gunna fit
@HeadlightRevolution
@HeadlightRevolution Год назад
They can usually be tucked into the headlight housing, but each application is different!
@bongwoophet
@bongwoophet Год назад
would the h4 fit my 2007 honda vtx 1300c? Alla Lighting thinks it may fit. Please advice and thank you per request.
@HeadlightRevolution
@HeadlightRevolution Год назад
Hey Robert! We can help, please email us with photos if you can so that we can help you! Sales@HeadlightRevolution.com
@krishanjeetsingh1567
@krishanjeetsingh1567 2 года назад
Can we adjust the beam pattern in H4 led? In my car led is slightly tilted i am not able to rotate it (can’t find the screw to remove and align it according to my wish)
@HeadlightRevolution
@HeadlightRevolution 2 года назад
Check out this video! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ItYkVxKXDUg.html
@tthoy7338
@tthoy7338 3 года назад
Is it absolutely necessary to re-install the OEM rubber boot over the H4 LED because if I do the rubber boot will cover over the cooling fins. The instructions do not say to re-install the OEM rubber boot. Do I really need the rubber boot at all? It will certainly run much cooler without the rubber boot
@HeadlightRevolution
@HeadlightRevolution 3 года назад
You will definitely want to use that OEM Dust cover, that will keep the majority of the dust and debris out of the housing, and will allow for your headlights to last longer! Let us know if you have any other questions, we are here to help!
@seangowan7441
@seangowan7441 3 года назад
Do you have a video on the H7 headlight bulb?
@HeadlightRevolution
@HeadlightRevolution 2 года назад
Not specifically on H7, sorry!
@aziaazia540
@aziaazia540 Год назад
I have 2016 Nissan Sentra I try so many LED light it doesn’t fit to the base of the headlight. I used H11 led still doesn’t work what do you recommend think appreciate
@HeadlightRevolution
@HeadlightRevolution Год назад
Please reach out to our customer service team so we can get some pictures and match something up for you! 218-755-5200 Sales@HeadlightRevolution.com
@vikramanandraj7013
@vikramanandraj7013 4 года назад
I bought a pair of idrop focus beam rs mini h4 leds the high beam and low beam is reversed on one side i saw that on the faulty side the bulb was installed upside down but i tried to put it the right way but there wasn't a way to do so, could it be the mechanic's fault or is it a manufacturer defect ,please advise
@HeadlightRevolution
@HeadlightRevolution 4 года назад
You might have to loosen a screw on the collar and adjust it from there.
@GENX80.
@GENX80. 9 дней назад
What about the heat can a load resistor help with that and how do i know which resistor to get??
@HeadlightRevolution
@HeadlightRevolution 9 дней назад
H4 bulbs do not require a load resistor, resistors are for turn signal bulbs! You might be thinking of an H4 PWM module, which we can help make sure you get the proper one needed! Sales@HeadlightRevolution.com
@proakkie942
@proakkie942 4 года назад
Is it recommended to use led bulbs with a reflector?
@Dontbanhmi
@Dontbanhmi 4 года назад
no
@davidrus
@davidrus 4 года назад
C6 H4 led on Intruder VS800 motorcycle. Installed the right way, but the low and high beam are reversed. Any ideas ?
@HeadlightRevolution
@HeadlightRevolution 4 года назад
That sounds like that may be an issue with the bulb. I suggest reaching out to who you purchased them from and see if they can send you a replacement.
@spydernutz
@spydernutz 3 года назад
On a Toyota Fj Cruiser how do you reinstall the rubber boot with LED bulbs. The heat sink can't be covered. Thanks
@HeadlightRevolution
@HeadlightRevolution 2 года назад
I would suggest reaching out to our CS team so we can go over some options with you! We have some extended dust covers available! 218-755-5200 Sales@HeadlightRevolution.com
@mara69323
@mara69323 3 года назад
Do I have to remove the cups, the one that hides the bulb reflect back to filamen
@HeadlightRevolution
@HeadlightRevolution 3 года назад
You will be good to go with those, you can leave them right in that headlight housing!
@stevenrodriguez1615
@stevenrodriguez1615 3 года назад
So how do I do it if the light goes out? I have the lights that have the fan attached, in a 1998 jeep cherokee sport
@HeadlightRevolution
@HeadlightRevolution 2 года назад
I would suggest reaching out to our CS team so we can go over some options with you! 218-755-5200 Sales@HeadlightRevolution.com
@sarthakaggarwal1075
@sarthakaggarwal1075 3 года назад
SOME OF THE HEADLIGHTS HAVE 2 pin plugs instead of normally used 3 pin plug, will there be any difference in their installation and will it be safe as the third pin is usually for earthing/grounding extra electricity??
@HeadlightRevolution
@HeadlightRevolution 3 года назад
Not exactly sure what you are getting at here, but all dual beam bulbs will have a 3 pin connector, one ground, one low beam, and one high beam. If you have further questions, shoot us an email and we will get you taken care of! Sales@HeadlightRevolution.com
@richardbarrington3408
@richardbarrington3408 2 года назад
@sarthak The two pin bulbs would be for the fog lights but not the high low beams…. Just letting you know.
@alejandrolucero147
@alejandrolucero147 24 дня назад
Can I use the 9003 h4 sylvania for headlights even if it says fog use only in va I am blinded by people's leds
@HeadlightRevolution
@HeadlightRevolution 23 дня назад
If your OEM Headlights use a 9003/H4 Bulb type, then yes you can use the Sylvania bulbs.
Далее
Watch this before installing a LED bulb
10:20
Просмотров 792 тыс.
Don't install h4/9003 LED headlights Upside down!
11:48