How to Install Hood Struts on your ND MX-5 Miata!

Подписаться 7 тыс.

Просмотров 7 тыс.

50% 1

In this video, I show you guys how to add some style and functionality to your ND MX-5 by installing a set of hood struts! All you need is a 12mm socket and 10-15 minutes of time. This kit comes complete with the struts, brackets, and extra hardware.
Be sure to check for interference issues once installing these and make adjustments as necessary to prevent damage to the hood, struts, or other components.
The orientation of the brackets does matter! I installed the lower fender brackets with the ball mount closer to the front of the car. This yields a slightly larger hood opening angle compared to using the prop rod but does not strain the hood and lift it past its comfortable height.
Thank you so much for watching! Feel free to leave all your questions and comments down below.
The initial quality seems high and time will tell if the struts or brackets eventually fail. For now, I am extremely happy with this product and love the extra function and style that it brings!
Buy yours here: amzn.to/3QaDNNX
As an Amazon Associate I earn from qualifying purchases.
Sponsored by Lasfit Auto Lighting: lddy.no/mw99
Use code "Ian&Lasfit10" for 10% off at checkout!

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@richardtravers8772 2 года назад

From Australia. My 2020 ND RF GT has explosive bonnet bolts right where you fitted your mount, that's what the hole under the plate is for. I suspect all Europena ND's will be the same, it's to prevent a pedestrian from slamming their head into the motor when you manage to clean them up jay walking.

@ErictheRedCantona 4 месяца назад

Same in UK so can’t fit these struts

@AlexisGitarre 2 года назад

LEGALITY PROBLEM HERE: Beware that this mod is not legal in EUROPE, if you have an accident your insurance company will step out immediately because it deactivates the pedestrian safety function of the hood. So ONLY USE OUTSIDE EUROPE! Same thing with the sticky dashboard mats that cover the passenger airbag and can cause Malefunction. Beside that, stay save and keep on tuning 🤘

@alphahotelecho 2 года назад

Thanks for the tip. Bought from your link and installed in my '17 FIAT 124 Spider perfectly! No more prop rod getting in the way and when raised, the hood sits a bit higher as well. Nice quick and easy mod for the ND Miata and/or FIAT 124 Spider.

@just_another_car_show 2 года назад

Love that he had different color schemes, may have to buy a set for the NA!

@kelseyblanton9419 2 года назад

My comment is that you are very pretty! Also the hood struts are nice!

@jdogi1 2 года назад

Ounces are pounds. Pounds are pain ;-) It does look sweet, though, and it's a nice luxury.

@mrspeeddemon727 2 года назад

That's a cool ass mod! What's the resistance like putting the hood back down? Thanks for sharing.

@DriveMX5 2 года назад

Thank you! It's very minimal until you get about 8" or so from it closing. At that point, the damper contacts the rubber weatherstripping on the windshield cowl but I don't think that's an issue. It feels like an appropriate amount of force when opening and closing the hood.

@GunKata Год назад

Dude, were the bolts in the hood itself hard to get out ? Mine won’t budge at all, it’s crazy.

@DriveMX5 Год назад

They were right but I had no problem getting mine out.

@Moriggia 2 года назад

There I have those things that bend the hood if you hit a pedestrian.

@NZLion 2 года назад

Same here. The USA either doesn't really have pedestrians or doesn't care about them, so they don't have the explosives fitted ;) Those of us in the rest of the world have a much tougher time finding compatible/legal struts.

@Moriggia 2 года назад

Are you going to put also an oil catch can?

@DriveMX5 2 года назад

Haven’t decided yet. It’s expensive to do it properly and my car is showing no signs of blow by or oil burning so it’s not my top priority

@Storm88000 2 года назад

Pointless unless you go all out with mods really

@Moriggia 2 года назад

@@Storm88000 why? It is for reliablity

@jgalt99 9 месяцев назад

@@DriveMX5 Have you put a bore scope in the manifold to look at your valves? The amount of oil involved is miniscule, not enough to notice on the dipstick between changes, but it can coke up the back of your valves and cause misfires and rob you of some power long before that because the ECU will compensate by reducing timing. I had to have my ecoboost truck walnut blasted at 40k miles because it was starting to misfire. Installed a catch can and went to 3k mi oil change intervals and my valves are clean at 75k miles now, (the OCI thing is almost certainly overkill, but walnut blasting costs 30x a diy oil change and it makes me feel good). I also haven't put a catch can on my miata, though. You hardly ever hear people talking about it on the various miata forums, but most of those people don't actually seem like performance-oriented types, so I wonder if they are just dealing with a car that is adjusting itself to an increasingly bad intake situation.

@DriveMX5 9 месяцев назад

@@jgalt99 I never looked inside the intake manifold. Probably would have at some point if I kept the car longer, but I also never noticed any performance issues like misfiring or reduced power.

@ludosys4903 2 года назад

Aside from additional (granted, limited…) weight I don’t see any additional added value when it comes to maintenance or cleaning / detailing. Spraying the black standard Mazda rod in a matching orange of your car would have been way cooler.

@junlee7763 2 года назад

Well, with a due respect, what is wrong with the rod??? It never gets in the way, it gets job done flawlessly 🤣🤣🤣

@DriveMX5 2 года назад

I mean you're not wrong, I just like the look, sound, and function of these struts. One less step to take when opening and closing the hood since I don't have to put the rod up and down. Plus scene points, can't forget those lol