How to Install iSpeed Wind Deflectors: Step-by-Step Guide" Easy DIY Instructions 

I purchased the BMW e90 for my car, and Fiesta MK8 for my friend, they fit perfectly and really easily. Will buy again from the same seller if needed... ❤

Thanks for your video, mine just arrived from you for my e90

Great informative video, had no fitting instructions & this was a great help. 👍

I appreciate how the tutorial made everything clear 🙌.. Thanks for sharing your expertise and making it so easy for me to install these wind deflectors on my own!

Mine fitted perfectly. Thanks for the way the clips went in. Lets see how are on the M1 tomorrow.

For all how may have a couple of questions…. When fitting, you may have to bend quite a bit to get the whole thing in, do not worry, they are quite durable with strength so don’t worry about cracking, put on plenty of pressure. Which way should the clips be facing? If you watch 5:14, it will show the spike should be facing in towards the car Should I put clips on the front also? You can if you wish, although they should be a tight enough fit without needing this, so do the rear only. After fitting the front ones, my windows won’t go all the way up! Bring your window up and down, using your hand also as a small amount of pressure, and eventually bring the window all the way up using also the palm of your hand keep it like this for around 1 day, and when you next put the window up and down, it will go all the way. If you still have troubles, at the end (beside wing mirrow) pull it a slightly away from the car, and try again. You should hear a slight clicking noise.

The strips of double sided tape on the long edges are so thin and short (not like in the video) I don't think they will do much. I'll put the clips in the rears but I've had to look in the comments to see if they are needed on the front.

Mine have came. What's the long strip for? Why did mine come with 2 small strips and 1 long strip? Shouldn't there be 4 smaller ones

Mine came with metal clips??

Good video, some nice little pointers i.e. where to fix the clips and which way round to have them. Just fitted mine this evening, looks very nice and more attractive.... Now after watching these guidlines, will not fail to fit again in future...... Appreciated...

The clips cannot be installed properly in Peugeot e-208. The clips seems to fall off after installation.

Are those metal clips just for back windows or front too?

After 4 months, are they good? They are durable?

Some of the clips when fitted don’t seem tight what can I do

Very helpful, but the fitting of the rear window clips was not as clear as it could have been as hands obscured the view. If this video is produced by the manufacturers I would just like to say it would be nice to see these also made without tint. I just don't see the need for them to be tinted, it just reduces vision.

Fitted mine today then warhched the video. Double sided tape is too weak. Clips causing problems but will reinstall them only at the back. I suggest a thin rubber to seal. Rubber to rubber will not slip and there will be no need for the clips.

Hello, are no clips needed for the front window?

Bro clips are inside the pack? Or you have to bought outside?

So why did I get metal clips with mines

pas convaincu que ça tienne bien dans le temps ?????????????????

Can you not use a dab of super glue to fit them in the channel's so that they don't fall off at high speed's or strong winds.