i have one question Salman, here on this video you show how to connect just open and close wires, but what abouth, blinkers wires, horn wires, closing power windows and unlocking hte boot (the fifth door)?
Thanks for help.it really worked. It would be nice if u could also explain how to connect the windows openning (when u keep the lock button pressed windows closes)and light signals when u lock and unlock the car.
Hello Salman, i ve one question. I ve 2008 kia ceed and i want to ask you , do you know which kable colour is open and which is closed.thanks and good days.
i have different type of vw. The thing that raises and goes down when you open and close the door has a rubber simmilar to the one the wire you pull to open the door at you and it is broken. Do you thing its a good thing to change it or it doesnt matter? yours its bigger and better build
hi mate, do u know the original wiring, is it the same in hyundai i10, i.e., 4, 24? how can i test the lock and unlock? did u put the order end of the tester to the negative, that is where did u connect the black, white and white/black cables to? thanks
i have one question, how you connect the two braun wires (number 11 and 12) to the turn signal so, when you lock and unlock the turn signals all 4 of them light up shortly? and also how you connect wire number 10 with pink colour for beeping signal acctually with horn?
Help: The yellow wire with which wire connect it? And the yellow / black wire? Tell me the colors I'm not very experienced .... Does this kind of central unit also close the windows?
cool video I managed to connect the lights and trunk. I'm just wondering which pin do you connect the yellow wire for the windows? can't seem to find the wiring diagram anywhere. thanks man :)
thank you very much , i search for you case but at the moment i couldn't find helpful thing , but in the case of the light you can check one wire by wire , start with giving them negative trigger , by using a tool like a tester with needle head connect one end on the car ground and the other end with the needle head try to press the needle head on the wire to fine the lighting wire , note ;;;; that only signal light is on the central lock socket . if you didnt find it try with positive trigger , which you connect the one end in positive
hello. what are the colors of pin 4 and 24? its hard to understand from video, i think you said blue-red for pin 4 and gray-red for pin 24, but i'm not 100% sure if i'm right. Thank U!
hey man, nice video but im really frustrated. i have a volvo 440 and i dont know what to do. i have a unit with the same wiring diagram. i dont know where to hook it up. i dont know anything......
Fleky Flek hi dear , iam not sure ,but you can open the door panel and see as well as , try to give the pin 4 and 24 a negtive puls so you will be sure that it is same if not , contact in my Instagram so i will check the wiring digram
hi any one help me to install the same on SEAT CORDOBA 6K2 ... central confort unit is behind the instrument cluster, i dont have any idea for the connections.
Hello..!! Nice Video. What about the turning lights when locking and unlocking..?? It is essential in order to see from a distance if your car is locked or unlocked. Many thanks..!!!
Thank you for your quick response. If you could tell me where I could search and find an input for triggering the turning lights, I could also look help you with this. I owe a SKODA FABIA 2001 with built in central lock but not a keyless one. The drivers door is very similar to the one you work with in this video.
Salman, u used 2 yellows 1 red 2 white ones together with the black for the ground. Is that in the same bunch of leads possible to connect the lights front and rear and also the boot working as well. thanks.
hi have you doing? i am going buy a remote star car remote and i wonder if we can make a deal like you guide step by step how to do it ... and I would pay you. while i learn somenthig you,ll get some money. think about it thank you
I just finished hooking a remote system up to my Golf mk4, but it doesn't work to lock it. You can hear the trigger going off and all, but nothing happens. All the wires are hooked up corretctly too. Anyone have any idea how to fix that?
Salman Almahal thank you very much bro! I really appreciate your time in putting this video here and answering people questions , it's very kind of of you . by the way اني عربي مثلك 😊 تحياتي لك يا طيب !
Hello and congratulations for the tutorial! I recently bought the same product but I can't find the wiring diagram to connect it... Can you tell me where to find the wiring diagram of a Seat Cordoba 2008? Thanks
one in pin 4 and the other in pin 24 , in the connector there are number , if you find the pins give them negative pulse so you will know which one lock and which one unlock . negative pulse mean you take a wire and connect one to the ground of the car and the other one to the wire which pin 4 and 24 is connected to . the connector should be fixed to the unit , you can do that either you scratch the wire or connect the negative wire with a needle and press the needle to the wire .
The colouring in my connector is different: pin 4 is green/red and pin 24 is blue / yellow. After connecting this, the unlock works, but the lock does not work. Any idea's? Thnx.
hi sorry for the late replay, you have one option to find the locking wire , the option is .... to use any wire one end on the car ground and the other end with needle head , then try to put the needle head to all the wire in the central lock wire , needle head can be as tester as i use . so when you reach the correct wire you will see the car locking .