great video brother thank you, I am currently installing mechanical pump on my TD27ETI and you helped me a lot. your English and explanation was very good, I understood the whole video well.
Great video my friend , I have to pull the pump out of my D21 . The teeth are angled and the slot is called a key way , your English is very good .keep up terrrano videos coming 👍👍
Greetings from Portugal, thank U for your share. My actual project is converting a '88 atmospheric D21 TD25 to turbo.I'm trying to learn how to swap from the original pump no lda to the pump that i bought with lda 1670080G07 from the Terrano II TD27. Other parts already mounted since i ve been collecting spares from 2 Terrano II i owned from last 20years.Hope that the pulley is the same with no issues has you prevent us with your video. Your video was very helpful, thank U very much. Best regards
Hi my friend.Let me know please,what is i crank the engine without the pulley and the mark that is on flywheel dissapear? Should i check the piston in 1st cylinder or there are some marks on the engines pulley ?
You are td27 guru i think. I have searched a lot to answer my 1 question and i hope youcan help me... What i can do and how to my td27 (turbo intercooler mechanical pump) to gain some more horses.fuel increase and boost is what everyone say but how to do right no one knows...i hope you reply...nice video man, keep it up
@@-jellunissanterrano8235 hey man.i will rebuilt my engine soon and i want to ask you if you do you have an Instagram or Facebook account in case i need more info.
great vid mate. i am swapping a TD27 manual vehicle to a TD27T complete motor swap diner cat was a automatic. the TD27T has a TPS but the vehicle its going into is only wired for the TD27 fuel cutoff and throttle stop solenoid. can i just ignore the TPS wiring loom thanks
Thanks for the good video, and good effort with the English. Do you know if the TD27 turbo engine has a diesel screen filter in the injector pump? My car (Nissan Terrano, approx 1990) runs rough with white smoke, very low power, but revs higher when pumping the manual diesel pump on top of the main diesel filter. It's as if the fuel can't get through something blocking the way. I changed the main diesel filter, but no change.
Hi again if I don't find a nissan terrano mechanical fuel injector pump because it is not easy to find one here, can I fit another pump from a different car please. Thanks Jonathan
Well i know only nissan pumps terrano/pathfinder wd21, pick up/ king cab. Urvan/caravan, atlas. That's the models of nissan with td 23, td25, td27 engines with mechanical pump
Hi there, Thanks a lot for this illustrative video. I have a Nissan Terrano 2 / Ford Maverick with this transformation and all runs fine except the tachometer, which reads a higher rpm than it actually is. I believe that the tachometer signal in the new setup with mechanical pump is coming from the alternator and this is slower than the original signal coming from electronic fuel pump. Did you find this minor but annoying problem in your transformation? spasibo
I think on td27eti tachometer take signal from crankshaft position sensor, which is on engine front lobe above the pump or on the top of transmission bell
Hey, did you solve the tachometer problem? Because I am thinking to change the electronic pump with a mechanical one this month and generally speaking I don't like messing with the electronic system of this car. One time the speedometer was not working properly due to the rusted connectors and it made the radio volumes change during gas pedaling. :) My car's 2004, tdi 2.7, I think Spain manufactured...
Hi I need to know if I change to a mechanical pump I need to change the injectors too or the one of the electronic pump are good to use Thanks Jonathan
No, you don't need to change injectors. they are the same. but injectors on mechanical pump sets on 105-115 bar, and electronic pump injectors sets on 130 bar.
Hi how are you? I found an injector pump for my 2.7 TDI but I need to send you some photos of it so you can help me identify some parts on the pump because I don't have that much information about that pump where I can send you the photos please Thanks Jonathan
Thank you, just what I'm looking for. What else would I need to do to my Mitsubishi Shogun Sport 2005, to convert it to run on a mechanical injector pump? Thanks in advance.
@@bravo20ghost27 on mechanical transmisson northing. on automatic transmission need to install trottle position sensor and make automatic control unit friendly to him))
Help how? Original Terrano 2 2.7 TDI with Mechanical pump 2000+ was rare. Or you want to install mechanical pump instead electronical . what's the question?
@@-jellunissanterrano8235 yes I have the electronical pump on my terrano and I want to change it to manual.. so which car model fuel pumps are suitable for terrano 2.7 2004 do you know?
Hi i have a td27ti engine and i want to know if you install electronic pump on engine the pulley fits perfect like you show with mechanical pump and pulley. Because is hard to match then zz marks on this td27ti and i have to move crankshaft to can match the z marks.
I actually don't understand, you want to install mechanical pump on td27eti? If you want to install it, you should better use mechanical pump pulley and install z against zz marks. if you want to install mechanical pump with electronic pump pulley, you should shift z mark on one teeth
@@-jellunissanterrano8235 no, im.asking to install the electronic pump back on td27ti, if the marks fits straight in. Because is hard time to get the correct position
@@BrunoSilva-yx8ri On old TD27T with mechanical pump that sensor installed under Fuel pump pulley in alluminium plate. and counts the speed of the teeth of the pulley
I remove electronic injector pump then replace manual injector pump now the automatic gearbox is not shifting the gears for dutro what can be the problem
Mechanical pump had Trottle position sensor (TPS) on the top? that help electronic control unit of gearbox to see the engine speed. on electronic injector that TPS is inside electronic head of pump. I guess your pump don't have tps on top of pump, or you don't know how to to integrate into original wiring.
Yes, sure . But the plunger pair will need to be replaced from qd32eti pump and some other inside parts. And after that it should be adjusted on the fuel stand under the qd32eti nozzles. Because nozzles on qd32eti works on 130-140 bar against 105-115 bars on td27T. Or you should find QD32T mechanical fuel pump from Nissan Atlas, or Nissan Caravan
And on qd32eti you should install 11 millimeter plunger pair instead 10 millimeter, that installed on td27t mechanical pump. If you use td27t mechanical pump.
@@joshut4065 If you want to install mechanical pump from atmosphere qd32, you'll have a problem. Because atmo pump doesn't have turbo corrector, that add fuel, when turbo boosts.
Илия my brother can you help me with something ,i am tinking of buying terrano 2.7 td 101 horse power but it doesn't have an AC an i am thinking of installing it from terrano 2 2.7 125 hp .Is it visible and can you give me advance on the procedure спасиба братле
@@goshogosho8368 Well, i don't remember, crankshaft pulley trickle for condition may have another departure on TD27Eti. But i may be wrong. I think you can install it? if you'll have full set