How to Install MIP CVD Drive Shafts In An Axial SCX10

Подписаться 67 тыс.

Просмотров 20 тыс.

50% 1

Click to subscribe: bit.ly/Sub-CCxRC - After turning my stock drive shafts into something that resembled a Twizzler, I picked up a set of MIP CVD drive shafts for my Axial SCX10. Overall they are easy to assemble...if you are more observant than I was and catch the one tricky part of the build and installation. You'll have to watch to see why I had to take it apart and start over.
I was already editing the video when I realized the solution to the problem, so I went back up and re-shot a lot of the video - hoping it would all fit together. I finished around 1am...so I was a bit tired toward the end.
Have fun RCing my friends!
----------------------------------------------------------------------------------------------------------
Like CCxRC on Facebook: / ccxrc
Follow on Instagram: / ccxrc
Follow on Twitter: / ccxrc
Follow Live Broadcasts on Periscope: www.periscope....
I buy my RC products locally at Debbie's RC World: bit.ly/DRCW_Local
~-~~-~~~-~~-~
Please watch: "Losi DBXL-E Slow Motion Bash"
• Losi DBXL-E Slow Motio...
~-~~-~~~-~~-~

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@zetathix 5 лет назад

I really love how dirt and grime the machine can develop on them.

@cookiecats6929 7 лет назад

Thank you so much for this video. You really helped me out with installing the MIP drive shafts in my new SMT10. Thank you!!!

@brandon5724 6 лет назад

Wish I would’ve watched this before I cut my spur gear cover 😂😂😂

@stevemoon2136 8 лет назад

Note to self, loctite is blue... Seamless edit T. Seriously though, great stuff, always a pleasure. 😊

@CCxRC 8 лет назад

haha! thanks Steve. Glad it felt seamless to you...it wasn't seamless to edit. It was while I was editing it together that I realized the reason the spur gear was rubbing...so I stopped and went back up around midnight and tried to re-shoot it in a way that might cut together with the video I had shot before....

@stevemoon2136 8 лет назад

+CCxRC Know wot u mean... These companies often charge a small fortune. You think they could afford to include a simple printed set of instructions. 😣

@noeysfastrc3291 8 лет назад

Nice upgrade really enjoy your videos. I have the Yeti XL I will make the upgrade for it. Thanks for sharing 👍

@roynelson7613 8 лет назад

those are very cool man I've never used a set yet but you should be good to go for quite a while now thanks for sharing bro

@CCxRC 8 лет назад

This is my first set. I had seen other people running them, but lucked out in some ways because it was all that my local hobby shop had in stock to repair the truck. I was forced to upgrade...ok..maybe not forced...but I'm sticking with my story.

@roynelson7613 8 лет назад

+CCxRC hahahahaha that's right man we got the love that saying that's my story and I'm sticking to it yeah that's all good brother at least you got a damn good sitting out my grandsons E-Revo 16 s goes through so many of the axle drive shafts I'm going to downsize him to a couple 2s lipo stock batteries you won't have any problems butt you know all about lipos more fun

@RcNickster709 8 лет назад

nice job brother .. great video. Would have liked to have a video like this one when I did mine.. 😬.. lol... ah well that's what it's all about, live and learn. thumbs up bud... 👍👍

@summersong88 3 года назад

Hello my friend, I’m learning a lot from this video, thanks for sharing this. I have a question: How tight should the drive shaft end mate with the axle housing? If I see correctly you have a little bit of gap there when you installed it, may I ask what is the purpose of the gap? Thank you again! 😀

@RCVHX22 8 лет назад

Excellent Install MIP CVD Drive Shafts video brother tony thank you for sharingツ👍

@davidspinney7344 5 лет назад

The upside to the twist in your stock shafts is it's your built in weak point.

@CCxRC 5 лет назад

David Spinney that is very true

@2cwik4u104 8 лет назад

awesome upgrade Tony. were you rubbing Loctite instead of grease on the shafts? lol.

@Issac_G 7 лет назад

Yes he defiantly was haha

@cinderellan1605 6 лет назад

Should I allow the thread lock (locktite) to sit 24 hours in areas that is needed then assemble the rest after? Or just completely put it all together?

@davidspinney7344 5 лет назад

Great video!! What wheelbase is your scx10 and do you happen to know the part # for this kit? I have the short 11.4 wheelbase in my scx10 and having a hard time finding the right kit.

@satorrotas 8 лет назад

Excellent video !!

@RcAVENTURE.V.F.R 8 лет назад

nice work 👍 👍 👍, thank for sharing 👍 👍

@l1nestory204 3 года назад

The material is Metal or steel sir?

@jefftroxell4923 2 года назад

Steel is metal...

@dirtydsrc 8 лет назад

Nice bud. Helpful info. :)

@MrNiteriders1 8 лет назад

Good info man👍

@Issac_G 7 лет назад

did you just put the included loctite on there as grease?

@CCxRC 7 лет назад

I don't think so. It comes with loctite and grease in the same container.

@Issac_G 7 лет назад

yes comes with both and the blue is the loctite , not the only one who noticed just wanted you to know but realized its an old video

@CCxRC 7 лет назад

haha. just watched it again....and totally did put loctite on a bunch of stuff. That's why I shouldn't make these videos so late at night. Luckily...i've pulled these apart and re-greased them.

@Issac_G 7 лет назад

he man I wouldn't even to make a nice video like this haha and your helping aot of people so thank you