How to Install Morimoto XB Black DRL LED Headlights on a 2018 Ford F-150 

Nope, the install is the same. Hope that helps!

I’ve had my Morimoto headlights since Dec 2018, they are amazing. Brighter than stock led headlights

If you have an EcoBoost, the #36 fuse stays powered up for a while after the truck is turned off, that's why you would use the #37 fuse, otherwise the daytime running lights will stay on for about 30 minutes after you shut off the truck. If you're concerned about the 25 vs 10 amp fuses, don't be. Hope that helps!

Thank you for your response. I received email from Morimoto and she states use fuse 16 for a EcoBoost. Which I have 2.7 V6 EcoBoost. So now I'm confused. I certainly don't want to do something wrong and I'm trying to do this by myself. But I have purchased and watched videos from RealTruck. So I'm asking you since your doing the video and the email is from Morimoto customer service...does using fuse #16 sound right or fuse #37? Thank you for your help

Did you ever figure out which one worked better? I'm trying to figure out the same thing on my 2020 F-150 ecoboost.@@donnelldoyle5340

Hey boss which way did you end up setting that up I followed the way he’s done it but sometimes my DRL stays on for a good while after I turn off my truck

Hey Justin, we agree, Morimoto headlights are super bright, and if you have Daytime Running Lights, you might not be able to turn them off without special programming. We recommend making sure the headlights are properly aimed because if the beam pattern is too high, it can be blinding to oncoming traffic. If the truck has been lifted of leveled, you probably need to re-aim the lights. The rule of thumb is to have the beams 2 inches lower than the bulbs at 25 feet, but it's good to fine tune that angle after a road test. Hope that helps!

I installed these a few days ago, I’m also having the same issue. 2 issues actually. First issue- The stock light switch on my truck (2019 XLT) has 4 light settings.. - OFF -DRLS- Low Beams - Automatic. I switch my lights to OFF and the DRLS actually shine brighter than they do when I have the switch set to DRL only. I haven’t found a way to turn them OFF while the truck is running. In fact, the ONLY way for my lights to turn off completely is when the engine is not running and I have the light switch on AUTO. Having it on OFF, keeps them on EVEN while ignition is OFF and truck is locked. Is this normal? Are they meant to do that? I followed all install procedures step by step down to the fuse and tried a couple different ones, all less effective than the one recommended (fuse 36) Second issue: There is a loud CLICK noise that comes from the fuse box whenever the lights turn on for the first time after being completely off AND every time I engage the high beams. In summary, I just want to have control over when my lights are on and off as well as find a solution or fix for the clicking. On a side note- I love the lights, I got the amber DRLs and they are absolutely phenomenal! Will be changing my tail lights out soon as well 💪🏽

You would want to use the #36 fuse since yours is not EcoBoost. Hope that helps!

@@Realtruck I to have 5.0 an upon using #36 my drls will not turn off any ideas ?

@@michaelday9338 Have you fixed this issue i’m having the same problem?

These are the Bushwacker Extend A Fender Flares! realtruck.com/p/bushwacker-extend-a-fender-flares/