How To Install Mytv fta and Multitv On One Satellite Dish 

how do I connect dstv and muti TV on one satellite dish

Yes,I can install very well but I want to be a DS TV agent and installer

But 28 is below 16 so how much more you said...you used 16 as primary and 28 on top....I don't understand

@1sportstv190 adding another LNB to get a different TP/satellite signal is unlike arranging the dishes with a stable signal. It's easier to get the 28E on the 16E.

We hve to get watsup group too ,for much more tutorials man tnk u

Alright I will make videos on that..

How can I assist you, bro

@@pbtecknology can I track Badr 26 digrees East. From Zambia 🇿🇲 to Southern Africa if t can MBC on Badr satellite what is the frequency?

@@pbtecknology than you for replying.

Can I install Badr 26 digrees East that contains. MBC 1,2,3,4,5 in Zambia 🇿🇲 southern Africa. Please please help me bro.

* Use a smaller dish to check, if you don't get the signal, get a bigger dish.

Get you a video on that ❤️

It's not available on the local markets but I can help you to get one. Chat me on Facebook facebook.com/pbtecknology

Thanks bro

Alright

I have not track both satellites on one dish. I will try and give you feedback.

@@pbtecknology hi. Any update regarding combining Badr 26” E and Amos 17” E? Also can you point to the continuation video on the diseq setup video?

Below is the DiSEqC setup video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-85UTymgLy1w.html

Sure

To track for the multi TV signal

You have to use different Satellite bro ❤️

You can use any free to air satellite receiver

Any universal LNB will work. It's available in every satellite electronics shops.

You're highly welcome

@@pbtecknology I do have a question though! Can one get Nigcomsat and multiTv on the same dish using 2 lnbf?

Yes, you'll need a DiSEqC Switch

Sure,💯. Follow the same process in the video

You can use it bro ❤️

10804 H 30000 Bro watch the video, you'll get all the info ❤️

You're using the right frequency bro. In some locations it might be a bit difficult at times when you're using a 50cm dish. Carefully adjust the dish pole, make sure its straight and strong. Adjust the bolts and nuts accordingly. The next thing is to add the MultiTv TP on your finder, ( 12525 V 30000 ), track and get the MultiTv signal, after that don't tight it too hard, mark the MultiTv position on the dish and change the frequency on the finder to Mytv frequency ( 10804 H 30000). Then raise the dish up to get the MyTv signal. It easier to get MultiTv signal, and MyTv is above MultiTv signal so to make it easier anytime you're to install Mytv first track for MultiTv to know where you can get MyTv. They are on the same line ❤️

Thank you bro ELOHIM YAHWEH bless you for the good works

You're highly welcome ❤️

@@pbtecknology excuse me ooh. You said that the multi Tv signal is above MyTV signal meanwhile the first LNB you set is the one below which you used the MYTV satellite settings to track, and the second LNB you set on top of it you used MultiTV satellite. So I would say that MultiTV signal is rather above the MyTV Africa signal. Isn’t that the case?

On a satellite dish, if you're to install MultiTv and MyTv signal separately, MyTv will be above MultiTv signal. But to add both on one dish, since it difficult to get MyTv on MultiTv signal, the MultiTv will rather come on top of the MyTv signal.

Many channels in all over Africa

Can you please state a few, am actually confused about it.

You can use any universal LNB with good strength

Thanks sir

@@pbtecknology what is a good strength for an LNB please?

The best LNB signal strengths ranges from 75% - 98%. Other factors too may cause the LNB to reduce it performance. Most LNB's under perform as it get older.

Sir, I've done it I got it as 2 inches, thanks so much for enlightenment

Get a tape measure

@@pbtecknology I mean the inches difference between Satellites. Like how you got to know DSTV is 1 inch on top of MULTITV & MULTITV is 4 inches on top of MY TV

You have to track and measure the distance to know. You will not get multiple LNB installation guide Anywhere. So after knowing and sharing, it makes it easier for others to get the signal in the next installation of the same type. The measurements are accurate, so you can use it without wasting much time guessing where to place the other LNB.

Get MyTv on the dish first. The MultiTv signal will be easier to get on the MyTv not the other way round.

You're highly welcome ❤️

Thanks bro

10804 H 30000 Try to adjust your satellite dish bro ❤️

Its not still working I almost fainted tracking but noting was working

Is it under astra2e/2f/2g. 28.20°E Or which one

Name: GSAT SF-7000

From 50cm upwards

Use this TP (10804 H 3000) to track it on the East. It's still at the same position.

You're more than a friend Bright.

@@pbtecknology Please can I get your contact?. I want to chat you on WhatsApp and be a closed learner. Please....

wa.me/message/4BO4DQ6IZ4P4G1

@@pbtecknology Please I didn't get in tach to your contact

@@pbtecknology link no longer valid

Hello

You can send your chat privately on Facebook facebook.com/Pbtecknology or Instagram Instagram.com/Pbtecknology What'sApp is currently unavailable.

@@pbtecknology Okay 👌 thanks

Pls can da same 4inches apply to 60cm pls

BCOS must ppls use milk cane ,n is not up to 4inches

4inches is the exact level that will get you the the MultiTv signal on MyTv easier, but you can use a different object to hold the LNB and by adjusting it properly, you'll still get the signal. You can use a copper wires to hold the LNB, if you can't get any proper holder.