Thank-you for your detailed video. I had lost my camera settings somehow and have been unable to get it to work since. Editing the config.txt file and adding back the camera_auto_detect=1 line brought it back. Great
FINALLY!!! Someone who fixed my problem. Thank you! I thought, my cam or Pi was fried or sth.. wasn't able to see the preview photos, but when i went to home directory and loaded the test.jpeg... man!! TY
I'm having an issue. I enabled the legacy Camera in Rasp-Config, rebooted, and when I went to do raspistill, it gave me a list of directions and not what was displayed in this video. When I tried Libcamera, it did not run. I've followed the tutorial, I have the camera plugged into the correct port the correct way. I'm running Raspberry Pi 64 on a Raspberry Pi 4 I've updated the firmware and updated the Pi. The camera is an Arducam 16mp. The Pi has a fresh load of the OS installed.
After typing "sudo libcamera-hello", the camera feed appears for a while then closes and receive error in terminal "XDG_RUNTIME_DIR not set in environment". How to solve this? Please reply
In my pi picture is captured in the terminal but while running in thonny aur through it is not working. It shows the error of the empty camera. If possible could you please share a code to run in thonny to capture picture
Thanks for this. This videos only shows how to capture still images. Please make a video on Camera video recording . If possible automatically with any sensor like iR. Tried with libcamera-vid but not working
sure mu friend i will soon make video on how to capture video from the camera. I hope this video helped. Please stay tuned to my channel for my future videos
Great video and good documentation. Now I want to control taking a video, is there a limit to how much it records. Basically, I'd like to duplicate what a RING camera does. And I'd like to know how to create a script so I can take a photo or video with one click, setting video for 20 seconds.
Thank you for the video. When i open my configuration screen the option to activate camera isn't on the list. Can you please help me figure out what to do? I think the board or module might be issue but I'm not sure. Thank you.
Hi! Thanks. I connected the HDMI to CSI adapter to the Raspberry Pi. Now I get this error message:No protocol specified Preview window unavailable [0:01:08.794926971] [1478] INFO Camera camera_manager.cpp:293 libcamera v0.0.0+3700-f30ad033 ERROR: *** no cameras available *** Do I still need to install additional drivers? And if so, how? Thank you for your help.
There could be 4 issues, that i can think of 1. Camera cable installed in wrong direction 2. Camera cable loose connection 3. Camera not enabled in firmware settings 4. Not using rspi4 I hope this helps. Please stay tuned to my channel for my future videos
That's funny! 🤣 When you enabled not recommended Legacy Camera support in raspi-config, you actually added "start_x=1" string into /boot/config.txt. Then you edited /boot/config.txt with nano to comment out that string and add "camera_auto_detect=1" which was there by default before you enabled legacy support! What's the point of that?! In other words, you enabled Legacy support via raspi-config and then disabled it by editing config.txt. And you don't have to run libcamera commands with sudo 😅 And, of course, you don't need to enable all the interfaces to make the camera work.
I can take videos and pictures with my camera. When I open "jitsi meet" in the browser, the "Chromium" browser does not recognize my camera. What can I do?
Could you please do a video regarding how to install 64mp camera in Rasberry pi 4 with full option .that is,digital zoom,autofocus and face focus.Looking forward for that video. thank you
Hi. I've made a program that needs to detect faces to work. I have the ribbon cable IR camera and it works fine with the commands and I've activated it in the settings. But my program just won't work with the raspberry pi camera, only a webcam I plug in via USB
If you create those program with help of internet code they normally are designed to work with usb based devices , please lookup for a part where you can select the source , for rspi i have given you commands to capture the image from rspi camera which you can process to detect objects. I hope this helps. Please stay tuned to my channel for my future videos
I updated firmware successfully. Every time I enable legacy camera I can't access the pi4 through the desktop anymore. I have to then ssh into the pi4 and disable the legacy camera and reboot for it to work fine. Why is this ? Any help appreciated. I'm running Raspi Bullseye.
i dont know what remote desktop app you are using may be this is conflicting with that. you can use XRDP for remote desktop and it works for me with legacy camera here is my tutorial on XRDP How To Setup Remote Desktop Connection To Raspberry Pi 4 on Ubuntu Using XRDP From Windows | RDC ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-55sUIufYofE.html How to Install Raspberry PI OS 64Bit on Rasperry Pi 4 8 GB with Remote Desktop connection using XRDP ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HMbDGH0X27k.html I hope this helps. Please stay tuned to my channel for my future videos.
Hi, I did a fresh installation of the 64 bit OS and followed all of your steps. I'm using PI3 Model B+. It did not work for me because after typing sudo libcamera-hello, it didnt show the camera feed. the terminal says: "libEGL warning: failed to authenticate" and gives me some INFO and WARN but also the ERROR: "Camera sensor does not support test pattern modes" last line is "what(): failed to import fd 20" The camera is working on 32 bit but I need 64 bit OS compatibility. Can you help me with the issue? Thank you
Did you try the old commands that i mentioned in the video and see if it works. Verify if your config file is accordingly modified for it to work. Also please share the camera module version so that i help you better.
@@AstroShootingStars thanks for the answer, I tried the raspistill command but it doesnt exist. The camera is the raspberry pi high quality camera V1.0 2018.
On Raspberry Pi 3 and earlier devices running 64bit os you need to re-enable Glamor in order to make the X-Windows hardware accelerated preview window work. To do this enter sudo raspi-config at a terminal window and then choose Advanced Options, Glamor and Yes. Finally quit raspi-config and let it reboot your Raspberry Pi.I hope this helps
This is the raspberry pi os 64 bit version. I have another video on my channel to install the rsapi os. Also instead of vnc use xrdp which is more reliable whose video is also on my channel. I hope this helps. Please stay tuned to my channel for my future videos
thanks for your detailed explanation. after typing sudo cameralib-hello, I get the following error: "failed to import fd 19" please share your ideas for solving this
It worked ! But why is my image is pink colored? Is it somekind of filter maybe you could do a tutorial on how to get a normal view? Thank you very much
Hi if you used the command i shared in my tutorial and still get the pink view this could be due to damaged camera or faulty camera. As the command used to display image from camera is normal and should display image normally. Try replacing and using another camera. I hope this helps. Please stay tuned to my channel for my future videos
You can proceed without update, its just upgrades the firmware not its not mandatory step. I hope this helps. Please stay tuned to my channel for my future videos.
yes it is normal now for newer os the option is by default enabled how will you can still modify the config file. I hope this helped. please stay tuned to my channel for my future videos.
I guess not as mostly the camera and commands are Operating system based not dependent on hardware. Its only way to connect your camera or enabling the camera might be different. In addition to command line enabling camera interface check in your settings menu for interfaces if you have camera enabled if you have that option avialable. If you still have issue please describe your problem may be I could help. Please stay tuned to my channel for my future videos
HELP!... I have this error: Preview window unavailable [0:01:25.656603116] [1826] INFO Camera camera_manager.cpp:299 libcamera v0.0.2+47-0684c373 [0:01:25.693398500] [1827] WARN RPI raspberrypi.cpp:1306 Mismatch between Unicam and CamHelper for embedded data usage! [0:01:25.694718011] [1827] INFO RPI raspberrypi.cpp:1423 Registered camera /base/soc/i2c0mux/i2c@1/imx219@10 to Unicam device /dev/media2 and ISP device /dev/media0 [0:01:25.695718254] [1826] INFO Camera camera.cpp:1026 configuring streams: (0) 1640x1232-YUV420 [0:01:25.696314011] [1827] INFO RPI raspberrypi.cpp:803 Sensor: /base/soc/i2c0mux/i2c@1/imx219@10 - Selected sensor format: 1640x1232-SBGGR10_1X10 - Selected unicam format: 1640x1232-pBAA
in new version of OS it is by default turned on. if you want the option install older version of OS. I hope this helps. Please stay tuned to my channel for my future videos.
I follow each steps Im using raspberry pi 3 and rasberry os Im getting error "camera sensor does not support test pattern mode" and Failed to import fd19 Plz help sir
Hello Sir,As soon as I type the command libcamera-still .I am getting a error message that " no cameras available". Sir ,What should I do now Could you please help me sir?
there could be several reasons. legacy camera mot enabled , faulty cable, faulty camera. try disabling legacy camera. I hope this helps. Please stay tuned to my channel for my future videos
Mine locked me out as soon as it restarted after the reboot. Wont take my password just asks again over and over. It doesn't say wrong password just asks for it again.
its possible that you added space in the pwd by mistake. Try repeating the process again carefully. Please stay tuned to my channel for my future videos
I have tried to enable the legacy camera using VNC viewer but the issue is that after enabling it and rebooting my pi the vnc doesn't show the desktop please help me with this ....
This should not be issue due to camera enabling , you need to re install the VNC as some thing with VNC might have got wrong or try using XRDP for remote desktop connection . I have done the detailed tutorial on how to do remote desktop using XRDP please find the link below ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HMbDGH0X27k.html I hope this helps. Please stay tuned to my channel for my future videos.
@@AstroShootingStars i have tried even that and i dont know why it takes lot of time to initialise in remote desktop connection after enabling the legacy camera
Which version of raspberry pi are you using. The camera has to be enabled in firmware and process I showed works only for rspi4. I hope this helps. Please stay tuned to my channel for my future videos
not sure which raspberry pi are you using also check if you upgrading the bios fixes your issue. I hope this helped please stay tuned to my channel for my future videos
If you’re running on the newest version of rasbian OS (Bookworm)then the camera will automatically be enabled, the option to enable it won’t show in the raspi-config interface menu like it does in all other previous OS versions. All you have to do is run the command libcamera-hello or libcamera-still and it should work. If not, editing the config.txt file will most likely be the solution (excluding hardware issues).
Hello @bndwthbeats3636 and @AstroShootingStars , I am using the Raspberry pi 4 with latest 64 bit OS (Bookworm) and same camera which is used in the video, and libcamera-hello works fine for me, but am getting error of not getting frames while capturing video using opencv in python. also camera is not found in the online webcam test or in googe meet video call , could anyone help on this part?
It works only for rspi 4. If its the case only thing it could be the cables are connected incorrectly or you have a bad camera. I hope this helps please stay tuned to my channel for my future videos
@@nightdreamer7071 ya. i ditched the piCam and got a usb webcam. got the 64 bit bullseye os. full version. bullseye has the camera option in the config. installed fswebcam in the terminal. and the cam was working.
when i enable the legacy camera in config, i rebooted and my vnc will say cannot currently show the dekstop. i am sure this is because of that settings because after i disable it, i can use my vnc as usual. can anybody help?
please use XRDP for the remote connection I already have a video on my channel ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HMbDGH0X27k.html I hope this helps. Please stay tuned to my channel for my future videos
thank you for your comments , with lib cam library you can use PIcamera2 python library to be able to access the camera in your projects here are the links for your reference www.raspberrypi.com/news/a-preview-release-of-the-picamera2-library/ github.com/raspberrypi/picamera2 I hope this helps. Please stay tuned to my channel for my future Videos.
its turned on by default in new OS. however you can still modify the config file. I hope this helps. please stay tuned to my channel for my future videos
Useless when other issues are ignored and liking and replying all positive comments.. Need help dude here with people having the same issue where pi 5 doesn't show camera it just opens and crashes
I fixed it, but it continues with the error " libEGL warning: DRI2: failed to authenticate Made X/EGL preview window". Can you help me?. Already enable legacy camera. I use Noir V2 camera
Did you install any thirdparty application or library before this. These errors could be issue due to previous installation. If you are not able to remove previous applications, try fresh installation of OS and then follow the instructions from my video also i have another video on installation of latest PI OS. I hope this helps. Please stay tuned to my channel for my future videos
error: XDG_RUNTIME_DIR not set in the environment. Made X/EGL preview window [0:11:04.633273277] [3038] INFO Camera camera_manager.cpp:299 libcamera v0.0.3+40-9b360a66 ERROR: *** no cameras available *
its showing me the eroor that failed to import terminatevcalled after throwing aninstance of 'std::runtime_error' please help me with that as soon as possible my project in not moving forward because of this
this is the link of the video for installing rspi os How to Install Raspberry PI OS 64Bit on Rasperry Pi 4 8 GB with Remote Desktop connection using XRDP ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HMbDGH0X27k.html i hope this helps. Please stay tuned to my channel for my future videos
@@AstroShootingStars now the new problem arises bro when it captures image it completely black 😭😭😭😭😭😭😭😭 . even installed ubantu software today and tried same problem (completely black image) but I can capture image in cheese it works but when I run terminal comment it's saves picture in fully black.
@@AstroShootingStars is there anyway I can contact you further to clear my dout's any media (instagram,linkedin,telegram, Whatsapp, twitter) and - thank your for your replys bro 🤝
I have an aach64 version (64bitOS) nd a pi camera. When i install picamera in the terminal it says successfully installed but this error pops up: Traceback (most recent call last): File "/home/navimkv2000/Desktop/tensorflowRasp/models/research/object_detection/forestsurvayfinal2.py", line 5, in from picamera.array import PiRGBArray File "/usr/local/lib/python3.9/dist-packages/picamera/__init__.py", line 72, in from picamera.exc import ( File "/usr/local/lib/python3.9/dist-packages/picamera/exc.py", line 41, in import picamera.mmal as mmal File "/usr/local/lib/python3.9/dist-packages/picamera/mmal.py", line 49, in _lib = ct.CDLL('libmmal.so') File "/usr/lib/python3.9/ctypes/__init__.py", line 374, in __init__ self._handle = _dlopen(self._name, mode) OSError: libmmal.so: cannot open shared object file: No such file or directory Please help ASAP
hey i have rasberry pi 3 and i did the same steps and i got an error pls help me on an urgent note libEGL warning: DRI2: failed to authenticate Made X/EGL preview window [0:01:05.062402003] [1569] INFO Camera camera_manager.cpp:293 libcamera v0.0.0+3700-f30ad033 ERROR: *** no cameras available ***
Under /boot/config.txt ensure either dtoverlay=vc4-fkms-v3d or dtoverlay = vc4-kms-v3d is currently active. I hope this helps. Please stay tuned to my channel for my future videos
Assuming your components are still good i would say install everything fresh to eliminate other factors. if not try changing camera module. I hope this helped. Please stay tuned to my channel for my future videos
boot loader is normally a separate flash and should not impact booting additionally check if the boot indicator light and power lights are turning on if yes then you just need to reflash the OS. if not your rpi is faulty. I hope this helps. please stay tuned to my channel for my future videos