I watched the video in Russian. It didn't work out for me. But I decided to try watching your video. And it worked. Thank you very much from Russia. Good luck and health.
wow... what a journey. I followed along but around every step there was an issue that halted the process and after a week of small bits of progress, I finally got it working. Pawel Wiejkut, wherever you are in the world, I am sending you a biiiiig virtual hug. Thanks my friend
@@Sm-jn4ri Hmm, The only reason i can think of why it would be doing that is because you are inserting the password incorrectly. Its trying to install something that requires root access and to do that you need the root password. This is the same password you use for when you sign into the openSUSE machine, the one you used as a system password. Make doubly sure that you are typing it in correctly because it wont show whats being typed, but its still taking in what you typed. If that's not the issue then it will require further investigation. Best of luck with getting it up and running, I'm rooting for ya
@@vb2050 did you write exactly what he write at this moment 12:10 " sudo zypper in uuidd " or something else ? because in description he said if you are doing after 1.4.21 its not working !
Big thanks to you, Paweł ! Did it all step by step. Now learning ABAP on my own. Great and transparent guide. Looking forward to read your book. (also you got my sub)
@@WA-sf3kg Not sure what happened in your case but try to maybe do it once again with creating new VM. I had also one unsuccesful trial, but if you pay detailed attention to all steps done by Paweł you'll work it out. Best of luck :)
Hi Pawel, thanks a lot. Your video is the best I have seen and I tested it and it works. Do you agree if I can translate your video in French for French people and getting some images from your video on my RU-vid channel to help French people on SAP. I will of course put your channel and this video as a reference. Thanks a lot. best regards.
I think this process (difficult) might be why there are so few pro-SAP users out there. I wanted to do this until I saw the amount of stuff required. I just want to have SAP application and some data so I can practice writing SQL code against various modules and tables. Basically, I am just trying to learn the primary/foreign key constraints between all the tables in SAP. All meaning the one relevant to a particular script. Need some cost accounting data, so inside the MM module and SCM modules are the data points needed. But how to relate them all?
In 4:51 that 64 bit option in Version doesn't not appear me, I downloaded and installed VirtualBox 6.1.18 because it was the only in the web site, I didn't notice this until that I couldn't (in the 5:19 minute) increase the CPUs 'cause the option to do it was disable. I really need to install this program and if anyone could give me some advice I will be very grateful... pls
I am not able to see any files in my SAP trial folder when I enter the "ls" command. The directory is presented as empty so I cannot install anything. Any help ?
hello i got this error why intsalling sap: error: sapinst has finished with an error code, please find logs in /tmp/sapinst_instdir any idea for a solution?
I encountered similar error and had to rerun the install but this time I copied the license file to location where the extracted files reside ...\server\TAR\x86_64
Hi Pawel, thx for your video. Today is my second installation days :) I had many errors yesterday due to the OpenSUSE Leap 15.2, today i tried OpenSUSE Leap 15.1 and everything was already correct
Hi @Pawel Wiejkut, really appreciate your guidance. May I ask a quick question whether this version 7.52 with Fiori foundation? And can I play around with UI5 app development and deployment to Fiori Launchpad? Thanks a lot.
Hi Pawel, Thank you for the very helpful video, but I have a problem: once I have the installation done, how can I display the tables and fields in SE16, I don't know if I have Install anything extra or do not have the free version.
Hi, i thank you for your video which such a usefull. I was stepping greatly but when i read ‘ls’ nothing happening. (15:10). And i have keyboard problem. For example when i wrote ‘i’ keyboard is writing (‘). Ehat should i do you think?
15:24 please help, it says: Hostname ... assumed to be SAP complient. touch: setting times of './install_2023-03-11_20-01-17.log' : No such file or directory and it says the .log is not writable
Good day, i have this issue where i have mapped the drive where the installation is but when i do "ls" it does not list anything? I have used OpenSUSE 15.1 64 bit and have update VirtualBox additional. Maybe some advise from your side please? thank you
great tutorial dude! I just have one question: I have a machine with 64GB RAM (windows 10) where I already have SAP HANA Express Edition 2.0 SP03 installed (virtual machine). My HANA system is complete including XSA. it works great. do you think I can keep this ABAP AS installation also in this same machine? disk is not a problem. my concern is RAM. My intention is to use SAP Gateway Foundation to create OData and consume it on SAPUI5 apps. just for learning purposes. do you think this is possible? Thank you
64 GB of RAM should be enough, in my opinion, to run both. Personally, I have HANA + XSA on 27 GB and it's run fine on Google Cloud Platform. On my PC I have 7.52SP04 (like on the video) on 8 GB RAM and it runs without any issues despite I have an increased number of processes in SAP.
@@PawelWiejkut thank you for the reply. I followed you guide and I was able to install it just fine. thank you very much. I did not try both instances up at the same time just yet. but worse case I have another machine I can do the the same ABAP Installation.
Thank you for the video! I have a problem.. At 15:00, when I enter cd /media, it says "no such file or directory". I followed all your steps up to that point but the error persists. can you help me? the Pobrane folder is on my desktop if that matters EDIT: solved the problem. Turns out it was my fault for not adding the online repositories at 6:15 due to insufficient disk space. I solved the problem by allocating more space (i think it needs at least 1500MB)
Hello Pawel, i have a problem after making IP Address, it shows me error code directory not found and i cannot install SAP ABAP zip files. Can u suggest something please? Thank you!
Pawel, my Instance is now running thank you for the help. My aim is to explore Fiori. How would I activate/launch/start service please? Also, i would like to enable PM? Is that possible?
Hi Pawel, great video but I need some help, I follow every step, I build a VM with openSuse Leap 15.1 with 6GB Ram and 120 GB of disk but every time the installer fails, after some tries I ran the installer with -g option and I get this message "Running an installation on this distribution of Linux is not supported by SAP in any way!", do you have some idea ? Best Regards
Hi Pawel, I think my license is not valid anymore. If i try to log in with Developer /Down1oad there is a error message: registration not possible error in the license check. Do u have a tip what to do? Thx
hello sir after extracting sap installation folder you got only three folder name are image server and client, you add downloads folder but access cf-pobrane and from where come installation folder install-sh ? actually I unable to got installation folder install-sh after extracting
Hi pawal. I have a Mac and sucessfully did all the steps (til 18:55) in your video. Now i have the Problem how should i go on with the GUI Installation and Configuration for Mac? Do u have a hint. Thx
Hi, I have downloaded everything as per instructions. But when I am starting VM it stuck on booting from hard disk... not getting anything after that or like unable to install opensuse image file. Would you please help me on this.
I am unable to install I am experiencing an error message after putting : ./install.sh This is the error message: ./install.sh : line 77 : ifconfig : host command not found Please help
I got error like 'The length of the host name you have choosen exceeds 13 char this is not supported by sap. Please choose different host name . to skip host name start install script with -s flag ' while installing install.sh through terminal at 15:30 min. Please help
Thanks Pawel for the awesome video on the SAP installation. I have successfully installed OpenSUSE but not able to read files from shared folder , I have followed the same steps as you have mentioned but don't know why its not reading files from shared folder in VM Box. Can you please suggest on this ?
Hi Pawel, thanks a lot for such a detailed step by step instructions. I installed successfully exactly you showed. Thumbs up, subscribed to your channel! I have a question, it may sound silly because I am not from the SAP world. I wanted to install SAP to my environment because I wanted to experiment testing on SAP. I wanted to open VA01 transaction which is part of Sales and Distribution but SAP GUI said VA01 transaction code is not exist. How can I turn on sales and distribution to play with this module? Or it has nothing to do with what we installed? Thanks in advance
@@PawelWiejkut Hi Pawel, could you please help me again with this Issue? I have downloaded and installed with your instructions the new license. But if i try to login an the SAP Logon, the Error: "Registration not possible - error during license check" appears. What can i do there? Thank you for your work and help.
Hi Pawel, I am getting an error while install SAP in opensuse (followed your steps to install) as "need a C shell to start the server". Is there anything I am missing here?
@@sureshmoningi I found something which installed csh for me: opensuse is an rpm based distro, not apt. If you run "cnf csh", it will come and tell you which package to install, in this case, it is tsch. cnf means command not found , and if you do not have that installed, then run zypper in command-not-found.
The hostname you have chosen is either configured on a loopback device or not active on this server, please check your configuration and hostname selection. If you are confident about your choice of hostname, start the install script with -s flag to skip the hostname check. What should I need to do to fix it?
I started to learn this today. But does it make sense to make it that difficult? I mean they could have explained or created better ways. It's not intuitive!!. Maybe is my fault but what a painful experience. Simplicity is more important. Thank you for the video btw.
Dear, i n the terminal we must use the same password of our SAP account we used to download the archives, the key we receive right before we download the archives, or we can freely create another password? Thank you so much if you could help me.
Hi Pawel wiejkut, Thank you very much for informative video. After following the instruction and finish add System entry. I encountered a problem. it said WSAECONNRESET:connection reset by peer". Could you please instruct me on how to fix this? (After installed SAP front end installer my laptop reboot, maybe this information is important). Hope to hear from you soon.
if you run into the same "C shell" error as I did: 1) close terminal and open a new one 2) Install C Shell with "sudo zypper install tcsh" 3) set C shell as default shell with "sudo chsh -s /usr/bin/tcsh" 4) run install.sh again :)
hello . i was interested in starting to learn how to use the sap software in order to work as a consultant. is this possible in this version as after i downloaded and installed it i dont see the usual sap menu that i usually see in youtube tutorials(like logistics for example). many transaction codes dont work and i was wandering if i did something wrong or i got the wrong idea about how the software is used ? would really appreciate a response . thanks :)
My system have total 12gb ram ...I gave 8 gb ram to opensuse ... everything was fine till I run install.sh file ..when I executed that file and enter password for new users my system got hanged! ....is this because I named hostname different or this needs compulsory 16gb ram ?
Hi while opening NPL Instance i got error saying 'Partner 127.0.0.1 3200 broken' and i fixed it by changing port address from 1200 to 3200 in Network settings. Now its working. Can we add one more server instance for working on RFC or IDOC's? Thanks in advance
Hello Everyone, I am new to SAP. From a Basis consultant perspective would I able to perform the day to day activities like start stop of SAP system, DB level access, TR after installing it ?
Hi! Pawel. Is this ver PI 7.52 contains only ABAP stack? No Java Stack is there? Can we perform all administration activities of C&M and can we develop all scenarios using all adaptors for different interfaces..?? Is this a full fledged IDEAS version of 7.52 like we have pi7.31 with both stacks..!! As SAP released pi 7.5 with only Java Stack and only Non IDEAS version. Can we install same dump of 7.52 in windows server OS, As I'm having Dell M4800 Precision Workstation laptop with 24 gb of ram n 2 TB HDD.
Hello :) Unfortunately, there are no installation files for the mentioned version. For now, the only legal way to check IDES is on cal.sap.com , please check
Hi Pawel, how do you do? Great video by the way, I followed your exact steps but I'm getting an error message at 11:29. The installation of Virtual Guest Addition (mine version is 6.1.12) fails with:- "bzip2: data integrity error when decompressing. Input file = VBoxGuestAdditions-amd64.tar.bz2, output file = (stdout) tar: This does not look like a tar archive" This is the third time I've installed OpenSuse on my VBox and not once been able to proceed installing VBoxGuestAddition successfully a single time. Kindly help me. And also I'm having problem.. At 15:00, when I enter cd /media, it says "no such file or directory". I assume that it's due to the absence of VBoxGuestAddition on my Linux System. Your help will be very much appreciated. Thank You.