THANK YOU!!! I wish all manufacturers put this much effort into their install videos. Nicely done!!! Now where is the video on installing the diverter and trim? This video is kind of useless without that. NOTE: I found a video showing the installation of the trim kit on another site. Search for "shower valve set too deep how to fix" (by the tile coach). The video isn't designed to show the install of this trim kit, but he has to do it during the video and he explains it very well. It's a shame that Delta didn't bother to do this, but for anybody that's frustrated trying to find an install video of the trim/valve for this rough-in, try this link/search.
hey good evening, my plumber installed the r-22000 ws valve. i am going to have a shower head and handheld wand sprayer.. i was watching your video and saw the right top outlet was plugged...i looked at my valve and saw that it IS NOT PLUGGED...but has a pex connection.... will this still work??? what would be the result of not being plugged? we want a two water exits, one being the showerhead the other the handheld...also
May I request a slight modification to the Delta design? I use Delta valves exclusively in my bathroom renovations. On my latest project, I put in a diverter valve, supplied by PEX pipes. I wanted to make sure I had what was needed in terms of length, but will point out that if you are even a tiny bit too long, it will have the effect of angling the valve upwards - the dual stiffness of the PEX pipes is that strong. This isn't helped by the design of the valve, which only has 2 mounting legs on the top part of the valve, thus almost encouraging an upward lift if the pressure is there. And then there is the similarly shoddy construction of the mixing valve "mount". They need to beef up both of these and return to the days when there were very stiff mounting points for both the top and bottom of the valves.
Do you need a cartridge on both sides I wanted bought a shower faucet T17T299-bl & I wanted to add a handheld to that T1799-bl & so delta told me to get the R10000 To make them work I did, my contractor said that was the wrong part so I call again they told me to get the R22000 so I did & now he said it doesn’t come with cartridges & it need 2 he’s charging 250 extra for lost time & I don’t know what I really needed for this I call delta again & is a new story of what I need ??? So how do you make this work???
Hello Celeste. Thank you for reaching out to Delta Faucet Company and we are happy to help. You will need a cartridge for each valve and they come with the trim kit you select. With any further questions or concerns, please do not hesitate to reach out to us again in a private message. -Carrie
I have a showerhead and handheld sprayer, so we are using the 3 way settting. We have always had an issue of the diverter not working. Water always comes out of the showerhead and handheld at the same time no matter what setting the diverter is at. However, after watching this video and comparing to photos I took of the installation process, it seems that the contractor capped off the left side and not the right. Would this cause the diverter to not work properly?
I installed the valve at the depth suggested then installed 1/2” Hardie backer. I now have 3/4 inch of plaster guard that is proud of the Hardie. My tile and Thinset will make up about 1/2” of that number. My question: if my plaster guard is 1/4” proud of finished wall, will I have any issues with finish trim?
Please dont ever use galvanized iron for water lines. They corrode and will eventually either leak or they will just rust close and not allow any water to come through. CPVC is also notoriously bad because over time it becomes brittle and will leak. For water lines please use either copper (the best option) pex (good option although not my favorite) or PVC (try to avoid using pvc for water lines however it is much better than CPVC)
The tolerance is +/- 1/4", so feel free to ignore that 1/16". Just be sure not to change you mind about 3/8" tile to go with something less than 3/16" or the trim won't sit tight to the wall.
Hi J-M. M. Thank you for your question! A 6-setting diverter trim can control three shower features. It has three individual settings and three shared settings. Stops are useful to turn off the water supplies at the valve. This can be helpful for installation or maintenance, especially if it is difficult to access the water shutoff for the home. Thank you for being a Delta Faucet customer! -Bryan
I am facing this issue- we are renovating the bathrooms, the constructors put new delta valve for the two bathrooms and the day after that we noticed kitchen cold tab is having warm/hot water. The constructors stated that he didn’t touch kitchen so it’s not his issue; but this only happened after he put on new valves for the new bathrooms, not they are still at demo stage, I don’t know how to find which valve is causing the issue
Him putting anything in a bathroom wouldn’t change anything at the kitchen. He would have had to swap the pipes at the hot water heater. (Highly unlikely)
I have done extensive research before renovating my bath/shower. I called Delta (locally based here in Indianapolis) several times to confirm both my bath and shower combo concerns. You cannot use the dual trim package (both the temp./vol. control and diverter). the R22000 is only for the dual trim package for shower only which is the T27 series. In order to utilize the show/tub functions you will need the "T17" series. One trim package for the water volume control and temp control and another trim package to control the shower. Then you would need a standard tub spout that has a push and pull diverter. You would need the R11000 for the shower diverter and R10000 for the vol./temp. control trim. Also the diverter shower trim packages are the T118 and T119 series. this is the Stryke model that I went with. Hope this helps.
Hi Jarrod! The R22000 would typically be used with more than one showerhead or shower feature. Yes, if using only one showerhead, two of the outlets can be plugged, but a diverter would not be needed for just one showerhead. Please reach out directly with any questions! -Bryan
Skipped the important part. Like which port goes th the hand held. Which port goes to the body sprayers. Just cut to it fully hooked up? That's not an installation video!
It’s going to depend on the position you want you’re hand held. On a house i did. I wanted the hand held on the right side of the valve, so i used the right port. And my rain Shower i used the left port. And the upper port for the Normal Shower Head.
