How To Install the Tusk LED Light Bar on a UTV 

It should be noted that the accessory block on some RZRs (my 2016 XP Turbo) do not come grounded from the factory; the center bolt (ground) on the accessory block doesn't connect to anything, from the factory. I had to route the ground to the bolt that mounts the radiator to the frame. Additionally, the fuse under the seat in the RZR wasn't big enough to handle this 30" Tusk light bar, and kept popping until I put a stronger fuse in there (I went to a 25 amp from the stock 15 amp).

Just finished my install on my 2017 Gold LE - just a few issues with the install. First: all the wiring is way too long for the RZR, which I know is because it is a universal kit, but a lot had to be bundled up under the access panel to keep it relatively neat and away from the fan. Second: all of the shrink wrap on the connections was poorly applied and some had to be re done. My accessory panel was wired, so I installed to the accessory panel as in the video, with the red to the far left, black to the middle, and the in- line relay I just connected to frame with a bolt that was there. Third: the leads that attach to the terminal posts were way too big for the post size, and had to be swapped for the proper sized leads. Fourth: The hole for the on/off switch was 13/16, not 3/4 as mentioned in the video, and last, the wires could not be routed through the cage A-pillar as described due to the connectors being too large for the holes in the cage. I did not want to drill them out bigger, so I opted to run the line outside the cage A-pillar tube and held it with zip ties. The hole in the plastic body panel (4:40) had to be enlarged to accommodate the connectors. But, I got it done, and it works.

you say tie use a bolt on the frame for the ground but you added to the accessory block post? A new updated complete walk threw video should be done to show people the whole wore harness and where each connection goes. Can be confusing to the noob

So you don't have to run power from thge battery. Just us the aux, thge one to the left?

why no relay?

is a busbar harness necessary for this?

will this work with a full windshield?

nice

How can I hook it up to a 2018 teryx 4 ?

Hi. What's the length of light bar

Here’s a great explanation of installing a light bar ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1q4wZqys0l0.html