You all prolly dont care but does any of you know of a trick to log back into an instagram account? I was dumb forgot the account password. I would appreciate any tips you can give me
@Eli Gianni thanks so much for your reply. I found the site thru google and im waiting for the hacking stuff atm. I see it takes quite some time so I will reply here later with my results.
Senang betul nak kenal org malaysia ni, few second the start of the video, just by listen to the slang and the environment, mmg otomatik terus cam beb. Apa2 pun thumbs up and kudos for this dude. Sangat2 helping😁😁
Thank you for explaining it in such detail! I was skeptical about this thing cuz it only cost less than RM15 for 1 pair of springs and seller did not say how the mechanism works. Thank you for making this video!
Thank you very much for the video! I ordered these and had no idea how to install them. I actually only needed one for my elantra and gave my second one to a friend
Glad i found your video. I bought the springs but the shop says that they cannot install it.they said it is for local cars. I installed it as per your video & it works like a champ.thanks man.
I think I'd put a strut on it to slow it down a bit as it opens. It seems almost violent opening. Just my thoughts. Nice job my friend and thanks for sharing.
Great video! Your trunk only bounce twice when it opens. Unfortunately for my car, the trunk will bounce so many times so hard it feels like it's about to come off! And I only install 1 spring!
This might be overly obvious, but you want the spring stretched/tensioned when the trunk lid is shut so that when opened/tension is released, and it will return to neutral state in the opened lid position. Closing the lid will tension the spring again, ready to spring open. The positioning of the end points in the trunk need to ensure the closed position creates tension. Accordingly, it is not necessary to tension the spring in the open installation position as long as closing the lid will in fact extend/tension the springs.
Indeed you don't have to tension however tightening it in the beginning will help so that the spring is not loose when they is no tension if not it will fall off easily. Thanks for the advice truly appreciate it. Appreciate the support
Great video thanks so much. I am not worried about my trunk opening up fully. But I am removing my trunk rods to install a better subwoofer on my rear dash. If I remove the rods for the trunk will I need the springs ? Because it will be difficult to open and close without them? Like will the trunk now slam down?
Nícolas Koutroularis indeed it is. But I had to use 2 as 1 wasn't enough to lift the weight. If I used one I had to tighten the spring but I was afraid it will damage the bracket
Thanks for the tutorial bro! Did exactly like you showed but it opens up way up too fast. Tried with 1 spring but it won't open. Even if I do it super tight. Any idea how to adjust?
@@Andrewsautofreakz thanks for the speedy reply. I tried with two springs. Fairly loose. Even still it was too aggressive when opening. My car's a Vios 2021 but the layout seems about the same as your car.
@@flubFTW mine in the beginning was aggressively opening as well but after awhile it was ok. I guess it needs to reach a point to help open. Unfortunately it's not like hydraulic.
Add a carabiner on each side to add space. That way you can install it completely loose but it would still be secured in place. Should help ease the tension.
I just saw your video and was wondering what made you install these springs. I see in the video that your trunk lid torsion bars are there. Was one of them broken and that's why the lid doesn't fully open? My Elantra has one broken and it does not open completely. Thank you.
ismaelyt09 the bars are there but mine doesn't fully open automatically. Nothin wrong with it. It's just like that hence why I had the idea to install spring to fully automatically
Check the tension of the spring maybe it's too loose. Or check the location of the spring if it's correct. Appreciate the support on the channel as well
There was very little tension on that spring and the trunk lid came up fast, should have just went to local hardware store found a spring for a couple dollars the length you need and pull it down with a pair of pliers, that would never work on my car I have a 67 Dodge Dart that spring is to wimpy!!
I've been using a wooden dowel that u bought from the hardware store to keep my trunk open but it is embarrassing😆 the metal rod that helps keep the trunk open snapped and now my trunk won't stay open on its own.
Hi brother, how r u, I'm still having difficulty to fix the spring for my Bezza, can I drop by ur place or could we meet somewhere for you to fixup my car, really badly need it done bcz driving grab, so passengers need to use the boot...
@@Andrewsautofreakz the spring I brought from Shopee, like yours you could screw/unscrew it with ur hands for the length but I couldn't it was damn hard and the nut inside the spring was stucked, guess was a fake item that's why was only rm 5
I installed this spring but I hate it when I can hear the spring pulling sound when my car drove over hump. It is quite ignoring thus I end up dismantle it
So sorry I had to go through it. You can try to adjust the tension to see if that helps . Usually when your trunk is close the tension should keep it steady
Anyone have trouble where the spring becoming loose and flying out of the trunk when you open the trunk? This is going on my moms car and don't want to worry about her getting hurt with them.... Trust that if something CAN go wrong it WILL go wrong on the car.....