How To Install Under Car Lighting By JACEonGLORYD

Подписаться 1,9 тыс.

Просмотров 107 тыс.

50% 1

Music by #
Damn - DJ Scene & Jayceeoh
• DJ Scene & Jayceeoh - ...
Boston Bounce - JSTJR x Micetro
[Merlin] CDLTD
Here I Show How To Install GloRyd UnderCar Lighting On A Coustomers Honda Odessy. Step By Step Instructions For Installation, I Also Explain NZ Law Regarding Car Lighting. What You Should Know About Under Car Lighting.
After over 10years experience with UNDERCAR LIGHTING it's only gotten EASIER..
NOW YOU HAVE THE CHANCE TOO GLOW YOUR RIDE..
Already cut and wired with an EASY TO FOLLOW installion guide for fitting
your GLORYD Undercar light Stripes.
The only LEAGAL/WARRETABLE undercar lighting kit available in NZ..
These SMD LEDS are unique,the latest range to hit the market.
Featuring 300 ultra bright wide angle non spotting LED Lights.
LEDS rather than being in rigid delicate tubes are mounted in resilient flexible rubber strips,
no possibility of breaking and flexible to match the contours of your car.
SPECIFICATIONS:
•LED Type: 3528 PLCC-2 SMT SMD LED (Waterproof)
•Color: RED
•LED Quantity: 300 leds or 60 leds/Meter
•Size: 1.5M x W0.8cm x T0.25cm x2
•Size: 1.0M x W0.8cm x T0.25cm x2
•View angle:120°
•Working Input Voltage: 12VDC
•Working Current/meter: 0.4A
•Output power: 24W
•Luminous Flux: 270-300 Lumens/Meter
•Working Tempreture:-20° to 50°
•Drive Mode:Constant Voltage
Package:
•5m Reel..RED..
•2x 1.5m Stripe / 1.5m Connected Wire
•2x 1m Stripe / 1.5m Connected Wire
•Scourer Sponge / Cloth
•Silicon Adhesive Glue
•Gloves
•Instructions
Everything You Need To Install On Your Car..
Check My Other Future Vids For More RYDS And Colours..

Авто/Мото

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@jup6401 4 года назад

You sir are cooler than the car 😎

@larayjah 7 лет назад

Thank You So Much!! This Video Was Helpful To A Beginner Such As Myself Lol Look Past The Negative Comments. You Did A Great Job!

@Kyee71 7 лет назад

The entire time I keep thinking quick quick the silicon is going to dry get those lights on!

@firooztaheri 10 лет назад

JaceNZ75, thanks for sharing. in some parts, music was loader than you and I couldn't catch up. In general it helped me. Thanks

@beaconlimo 10 лет назад

Thank you body for the job !

@donaldwhiteman3224 6 лет назад

Love it simple! #thankyou

@alfredomolina3294 8 лет назад

next time you make a video dont use music

@marcokendi 10 лет назад

Are you Michael Jackson?

@wesleyshaw9550 4 года назад

Strips are not a good source to use . Modules are water proof and it’s a better quality. Strips are water resistant. Go to any local LED KING STORE and you will get a very good quality lights .

@jaceNZ75 4 года назад

Cheers, you're not wrong.. I have multiple lengths now, just waiting for the strips already installed to stop working before replacing. It has been 5 years and they are still working fine.. Thanks for your comment..

@giyomiyomi6689 9 лет назад

hi jace its very nice and impormative is it possible to install the led lowerbody light on my lancer ex GTsport..thanks for your reply!

@jaceNZ75 9 лет назад

Yes, I have installed lights on many lowered lancers, most vehicle's are similar in design when it comes to under carriages..give it a go. cheers for the comment..

@giyomiyomi6689 9 лет назад

thanks sir jace its my pleasure big help to me,just one thing the one i see how you connect directly the wires in foglight is it possible & not in battery connect its work..if i do it the same way its work also in my car...thanks for your help advice im from manila.godbless

@jaceNZ75 9 лет назад

Giyomi yomi Im glad to answer any of your question. I have found it much easier to connect directly to fog light and use the factory light switch, but it is possible to connect an independent switch using one of many ignition power sources inside the car(eg cigarette lighter). Inside the car and outside the concept is the same. Earth the black wire, cut or split and put a switch on the red power wire, connect the other end to a ignition power source inside the car. NOTE a friend has his inside lights connected to his car stereo so that when he turns his radio on the lights turn on. Thanks for your question, feel free to ask more. Churrrr from New Zealand

@giyomiyomi6689 9 лет назад

thank you so much sir jace i'm glad too,reply again maybe it easy for me to connect in eg cigarette lighter,or radio power but how i connect it easier...can you give me some ideas or tecnics how it possible to connect because this my fisrt time to install because a lot of videos i watch in youtube its difficult for me but your easy way strategy is very good for me.thanks & advance godbless! NOTE:sir jace LED LIGHT i can buy is 5m 0.4wats 12v if im correct it is compatible for my lancer ex GL sport.THANKS & ADVANCE!

@jaceNZ75 9 лет назад

Giyomi yomi 5m 0.4wats 12v SMD light strips are compatible with all 12v motor vehicle's. Yes they will work perfect in your car.. But my best bet with your "particular car"(not sure of interior) is to use the cigarette power source connected by plug. If you can, try remove panel to access inside of lighter at later date. If you have a cigarette lighter adapter or something similar eg.12v interior car neon lights (very cheap to buy) you can cut the wires and connect directly to the SMD light strips red and black wires, and still use the neon. This will avoid removing cars dash panels to get to back of lighter or radio. much easier.. Do you have a subwoofer amplifier installed in the trunk of your car ? if so, you can connect the red and black wires from the light strip to the MEM/ERTH on the amplifier.!! Give it a go. Make a video and let us all know how you get on. more then happy to help, and best of luck.. Churrrs.

@johnk8103 9 лет назад

The usic is too loud. Good video but the music makes it tough to hear.

@Abu-uy4ci 10 лет назад

thank you very much but where can i find it

@jaceNZ75 10 лет назад

زميله آسف، وهذه مجموعات الضوء المتاح فقط في نيوزيلندي وOZ .. يمكنك شراء 5 متر أطوال من خليج الإلكترونية التي تحتاج إلى قطع الأسلاك وإلى 4 أطوال للذهاب تحت السيارة .. حظا سعيدا .. Sorry mate, these light kits are only available in NZ & OZ.. You can purchase 5 meter lengths from e-bay which you need to cut and wire into 4 lengths to go under the car.. good luck..

@مخ-مصدي 9 лет назад

whatz da name of song fella??

@BlondynCh 8 лет назад

anybody else came here to see what it looks like at night ?

@FAlLVLOG 7 лет назад

Is this guy on Flakka?

@deinerecio2508 10 лет назад

Sir how many wattage is this?

@jaceNZ75 10 лет назад

@5m 0.4w..12v input..for some idea of the power usage on my vehicle.3sets of lights 2audio amps 2 vid monitors, NO capacitors. No real battery issues..this is one of the reasons I use SMDs now..Thanks for the comment..