No video :(

HOW TO: Install Z Bars on Harley-Davidson Sportster

Подписаться 548 тыс.

Просмотров 271 тыс.

50% 1

How to install Z Bars, grips, and new brake line on the Harley Sportster!
Ms. Blockhead didn't like the stock bars on the Harley 48, and loved the look and feel of Z Bars. So she decided on a height, I ordered everything we needed and surprised her with parts for Christmas! We installed the Z Bars soon after!
► PARTS USED:
- Z Bars 8”: amzn.to/2CIvjYf
- Arlen Ness Grips: amzn.to/2DdYOSY
- Burly Cable Kit: amzn.to/2mdg6aw
- Brake line only: amzn.to/2CMUj0N
- Brake Bleeder Pump (Stockton): amzn.to/2CKdNmE
- Brake Bleeder Pump (cheaper): amzn.to/2mcWAuV
- DOT 4 Brake Fluid (Motul): amzn.to/2FjYNxp
- WD-40: amzn.to/2CMUfhg
- Blue Thread locker: amzn.to/2CLMAjo
- Magnetic Bowl: amzn.to/2CJJY5r
- Torx Bits: amzn.to/2mdgQMQ
- Hex Bit Sockets (SAE): amzn.to/2FjYZN9
- Shop Towels: amzn.to/2EspcIj
The process should be nearly identical for most Sportsters. I know my 2013 Iron 883 was the exact same (except I installed drag bars so I didn't have to change the brake line.) The bike worked on in the video is a 2010 Harley-Davidson Sportster 48. Based on your make and model year, your experience may vary. Please note the disclaimer below*
As always, thanks for tuning in! Be sure to Like / Comment / Subscribe!
Till next time, ride safe out there, & stay vigilant!
Deuces!
▬
► BIKES:
2017 Harley Low Rider S (FXDLS)
2015 Honda CBR1000RR
2010 Harley 48 Sportster
1987 Honda Rebel 250
▬
► LINKS:
Behind the Scenes!
• / blockheadmoto
My Gear @ Amazon:
• www.Amazon.com...
Blockhead Merch:
• bit.ly/Shophead
Social Medias:
• Instagram - bit.ly/BlokHdIn...
• Facebook - bit.ly/BlokHdFa...
• Twitter - bit.ly/BlokHdTw...
▬
► MAIL:
Blockhead Moto
PO Box 18
Windermere, FL 34786
▬
Music:
Tonez & Re-C - Kyoto: bit.ly/2o95eOL
Creative Commons - Attribution 3.0 Unported - CC BY 3.0: bit.ly/2o941XS
Music provided by AL: bit.ly/2o9aKkH
________
*DISCLAIMER:
This is only a guide, and not meant to be taken as the only means of completing this job. I assume no responsibility and am not responsible or liable, directly nor indirectly, for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such Content, site or resource.

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 236

@TheHarleyTech 6 лет назад

Solid work for a “not licensed tech.” Keep up the good work on the videos. I enjoy the hell out of them!

@williamgarcia102 6 лет назад

I love this video just for the fact that your girl supports your hobby. My gf asked me to come visit her yesterday and she specifically asked me if I could bring my Harley instead of my car. I gave her extra loving for that.. good job and nice video.

@CactusJack252 6 лет назад

William Garcia I hope you rode her better then the bike!

@joetroutt7425 5 лет назад

You rode over there and she rode you back.

@HeyCoolStoryBabe 6 лет назад

I love how he referenced Revzilla’s beard scale of difficulty with a 1 bearder being easy to a 3 being hardest on the BSD. Lol 😂😂

@MeestahChuklesOne4 6 лет назад

Threw a set of Biltwell Keystone Z bars on my 883 as well as my own exhaust and intake install. Still tuned in cause I'm seriously diggin y'all's videos together. Working on your own bike is soooooo much more satisfying than taking it in. All the leftover scratches and whatnot from my mistakes are just added character. Keep up the good work brother!

@rayroman4111 6 лет назад

I wish i'd have a wifey that liked to work on bikes with me like you do, bro. You're both lucky. I really like the two of you doing this together. Big up! :)

@pim1234 6 лет назад

Isn't it his daughter ?

@moonshineman33 5 лет назад

@@pim1234 no it's his girlfriend or fianceé or his wife. Not sure which one.

@AlexD02 5 лет назад

I agree. My girlfriend doesn’t like that I have a motorcycle at all. Hopefully she opens up to it goes on a ride with me soon. I even have a backrest for her lol.

@badboybootz8 4 года назад

Why do y'all want girls that act like men thats so weird to me

@zachbenson1780 4 года назад

@@badboybootz8 Why are you sexist?

@adamstainer9577 6 лет назад

Love how involved Miss Blockhead is, after my wedding and honeymoon March/April 2018 (in Davenport FL!) I’m hoping to get a 48 and an 883 for the Mrs and I. Not so easy finding an abundance of Harley’s over here in England without blowing huge bucks. We’re 26 and 23, I’ve only ever owned an R6 and the fiancé isn’t so keen on riding....Keep up the good work you two, every video of the two of you is ammunition for me to use on her:)

@ronaldanderson3816 4 года назад

My wife and I were able to find the brake line we needed and install it thanks to this video. Thanks for saving us some money.

@jtodd0221 3 месяца назад

I just got an 883 and this is probably going to be the first thing I really change.

@Grimgeist 6 лет назад

Can't wait for a dual vlog on both HD's. Both bikes are awesome and they deserve a video! I had a Sportster Nightster 2010 and I traded up to a 103 Softail Slim 2015 last year. I miss my sporty but couldn't be happier about my Slim. Love the vids so keep em coming!

@trigas55 4 года назад

Thank you Ms Blockhead and assistant. With your excellent tutelage I am happy to report a complete success.

@rebel_ltz 6 лет назад

Man, I just replaced my handlebars on the Iron and because I didn't like the new ones I had to replace them again to the stock ones. (And I will have to do it again when the new-new ones arrive.) The whole process was 2x2 hours in the cold winter wind... This video gave me serious PTSD. Also for the other guys out there planning to change to taller bars: If your bike has ABS, your front brake line will be much more complicated than shown in the video. In this case be prepared that you will have to visit a brake specialist service since the stock ABS brake lines are pressure fit to the lower triple tree ABS unit and you won't be able to change to longer ones yourself (without fancy tools).

@djohnson3678 6 лет назад

ouch! good ... looking out for us man.... high 5 !

@motorcyclemichael2938 6 лет назад

Im glad you went with the z bars and not the drag bars! Looks great

@robertjohnston25 6 лет назад

Shoulda went with the shorter ones

@joetroutt7425 5 лет назад

@@robertjohnston25 yeah like his stock ones.

@Boobtube. 5 лет назад

great job. I liked the paper shop towel with hole in middle to fit around the brake reservoir when filling it with brake fluid.

@jontest5718 6 лет назад

I just ordered some 8" bars not two days ago. The gentleman claimed the bars should be good with stock cables, we shall see. Enjoyed watching this and getting to see the finished project

@joshouten377 6 лет назад

Jon Test how did it go? I’m in the same boat, just ordered some 8” apes and would like to know if I have to get cables before hand

@nasomaz 6 лет назад

I'm in the same boat; I ordered some keystone xl bar (8.5 rise). All the reviews say that only the break line is short but you can unmount it from the bracket and bend the metal part to make it straight and it will have room to fit so problem. Did yout install go well ?

@jontest5718 6 лет назад

It went fine, the stock bars on my bike were a bit larger so the stock brake line ended up being ok. Unfortunately I have not had a chance to ride the thing because it came out of storage and is only firing on one cylinder. Ongoing cluster fk trying to resolve it.

@nasomaz 6 лет назад

Glad to hear bars were fine. I hope you will resolve the mechanical issue with your cylinder !! Evos are bullet proof I am sure you will figure it out.

@grandpamcnuggets 6 лет назад

Wish I found a video to help me replace my bars instead I was an idiot and took it to the dealer because I wasn’t confident! FML! But I’m glad you put one out! When I get another Harley I’ll reference to your video!!

@girlzlikecoolsht2949 3 года назад

2 bearder with YOU helping. 10 bearder solo.

@andyraider5952 3 года назад

Man I wish I had friends like u guys I was a victim of a hit and run 😭 and now I gotta replace some parts on my 883 iron and thats why I'm here

@tccoup355 6 лет назад

Wow what a huge difference those made, for the better of course. Awesome!

@Taino871 5 лет назад

Cool Mrs Block is left handed like my Queen is. We also work very well together. It is refreshing to see couples do projects together. Awesome stuff, Awesome video. Thank you

@arnold321ful 6 лет назад

This guy is like the motorcycle version of ChrisFix

@donaldwest9373 5 лет назад

Crazy how changing the handlebars gives the bike an entire new look

@EDCtexan 3 месяца назад

Harley needs to sponsor you anything i need a visual on you have done it

@MrAndrew1953 5 лет назад

Very good step by step guide - like the Zbars - look much sharper than the standard curved bars.

@mattvanshufflin9986 4 года назад

Awesome install videos man. I’ve been loving learning how to play around with my first bike (an 883) and have used many of your install videos. Dope content!

@LastChanceFossil 5 лет назад

What a wife and husband duo! love it

@Deemosorence117 6 лет назад

Easier way to install the throttle side instead of taking it apart is 1. Remove left side controls and grip (if keeping same grip) 2. Loosen right controls (do not remove yet) 3. Take off handlebar clamp (middle part) 4. Take handlebars off and right side controls should slide off in one piece 5. Then do reverse slide right side controls onto new bars Put bars on middle clamp tighten down then install your left side and adjust other screws and clamps as needed before standing bars completely upright

@joetroutt7425 5 лет назад

That's only if you're not running wires through the bars.

@oscarmadera2669 6 лет назад

Hell yeah great vid!! I was just looking to replace my bars and was worried about the cables but this video just cleared it all up!! Great work!!!

@larryavilez8060 2 года назад

Man thank you for this video I'm currently about to put 14inch apes on my sporster 72 I'm surprised you didn't take off the tank every video I've seen they take off the tank now I know it really not necessary

@shaunmarie Год назад

definitely wanting this for my 883 iron. they look so good!!

@andysomerville8761 6 лет назад

hey guys thanks for the video , started watching your channel about a year ago and yesterday bought my very own nightster 1200 my first Harley you guys had a hand in that, love the channel

@jakedunston5222 5 лет назад

For not being a mechanic, I was really impressed with your professionalism. Some more lighting would have helped. Great job!

@HarleyFirestorm 5 лет назад

The Z bars with pull back are great, I have straight Z bars, look good but are not the most comfortable.

@braydentaylor880 5 лет назад

Hey man, I got a 2016 XL883N wandering if I bought these same bars do you think I could still use the stock cables?

@angiebobangin 3 года назад

Such a helpful video! Thank you! Also I have a question for Mrs. Blockhead. I’m not sure how tall you are but I’m 5’5” and I just bought a Forty Eight I’m looking for handle bars that will help me sit more upright without locking my arms out. I’m wondering if these Z bars helped with that for you? I’d really appreciate any input before I spend money on new bars 🙏🏼

@Cyril_Harperink_87 5 лет назад

Definitly looks better than drag bar. You did a good job. And thanks for advices.

@labratmanny1251 Год назад

Thanks, I needed that information awesome

@JIMBOBALOU 6 лет назад

To properly adjust the throttle cables you need to pull the air filter to see the butterfly valve in the carb or throttle body btw. There's probably videos on RU-vid to show you how.

@THEBIGCHULETA 6 лет назад

Wish I could have seen this when I did my 48! Great bike.

@XceedDriver 6 лет назад

Thank you for this video! I am actually looking to add some Z Bars to my 2015 Iron 883 and have been wondering what extensions I need to do. Much appreciated!

@richarddelotta2586 6 лет назад

I used this vid to help do the bars on my bike. Thanks for what you do

@jasonsanderson9385 3 года назад

Great Video!! Next thing is to switch out my Drag bars to Zbars

@PaulG.333 4 года назад

Must watch, very informative, thanks for sharing.

@braindamagedbad 6 лет назад

Love the channel, however, this is incorrect... I have the same bars, the stock brake line is capable of reaching just fine. The clamp on the hose allows enough room for the line to be bent and pushed. I bought 8" thinking 10 or 12 wouldn't fit. Pretty sure I could have gone higher. At least in my experience...

@jmantis3486 6 лет назад

How long did this take you?

@braindamagedbad 6 лет назад

J mantis the install took all of 20 minutes. It went really smooth. I also didn't vlog mine, so his probably took longer.

@Waelaboulmagd 6 лет назад

Stock cables on different bikes may vary in length, but I just installed Todd’s cycles 10 inch bars on my 2014 softail slim yesterday. All stock cables worked fine and I used the stock riser. Even re-used the stock grips. I was sure I could get away with stock everything because I did a lot of research and found many others who had done the same. One guy even claimed he did 12 inch bars with stock cables on a softail slim, but I thought that would be a stretch. However, if you have ABS...that will need a new cable.

@Waelaboulmagd 6 лет назад

Forgot to mention...I love your channel and all the videos are really helpful. Great job.

@anthonysullivan21 6 лет назад

Jason Gregg is right, I have 2016 iorn with 8in ryca zbars. Stock break cable. Wiggles with enough play full left and right. However. It is no longer routed useing the two clamping points with that said. It's probably better To extend and route the same way. Just checked the Amazon link. The bars in this video is the same as mine their was two reasons I bought them and one side affect they are knurled (only zbars I found like that ) and the width of the bar is about the same as stock. All others I found. We're about 2.5 inches narrower on both sides. Side affect: they where cheaper hope. All this helps someone

@blazekeith2648 6 лет назад

You guys do a great job going into detail! Love the wat it looks now im gonna put those on mine now thanks for the video!

@dustinhxc 6 лет назад

This is awesome, thank you! Definitely switching to these bars when I get a 48.

@CactusJack252 6 лет назад

Great work. Up next should be an exhaust system or a set of slip on mufflers.

@Bubbyis12 6 лет назад

How long was the brake line?

@tvbuu Год назад

Just bought these myself

@robertslaughter7013 6 лет назад

I like the Revzilla beard scale reference

@FocusReflect 6 лет назад

Nice man! REally like these duo vlog build series :) Can't wait to see more!

@patmanwainwright3423 6 лет назад

Looks good Z bars suit Sportster bike is coming along nicely good work mr & mrs Blockhead

@Grimgeist 6 лет назад

Btw. How's that ATV and Dirt bike rally going? That's hilarious! I've wanted to do the same thing on my 1987 Trx250r here in Wichita Ks. because they shut down a riding area everyone went to by the little Arkansas river in Hutchinson Ks,. It's bull crap! We never hurt a thing and it was a nice release to ride quads on the weekends!

@luisbiascochea2829 6 лет назад

Hey, happy New Year to you Year to you and ms/Mrs blockhead just got home from work watched the video as always very informative and to the point....😎😎😎

@Svtdude302 6 лет назад

Great video! Looks like you used the “10 inch cable kit. I can’t seem to find the “10 inch cables for Sportster 48.... the sites seem to all say they won’t fit. Which one did you order. Thanks

@ikarichevystar 4 года назад

Macdude Rider i have the same question? I want to put this zbar, but i dont fine de line

@montechristo0214 5 лет назад

Hey,you know what is the highest rise i can use without change any cables?iron xl883n abs 2017?thanks. Nice vid.

@PkwyDrive13 4 года назад

Some people have gotten away with 8in bars without changing anything, but I'd say 6in for sure.

@mandizzle0517 4 года назад

sweet..my wife helped me install taller shocks on my sportster!!

@ericdelacruz8519 6 лет назад

how long was the new brake cable ?

@BRUISER1 6 лет назад

Great video. Very thorough 🤙

@samrodriguez9864 4 года назад

Nice work . I think I’ll save this video so when I get my z Bars I can use it as a reference.

@trevslife1119 5 лет назад

For a 2019 Harley iron 883 xl883n what brake line should I buy and it has abs do I do anything with that? I’m having trouble finding a good brake line that matches my model number

@NicholasSwansburg 6 лет назад

Since I live near Orlando as well is it possible for people who live near by to join the blockheads crew. Trying to find others to ride with who have close to the same mindset as I.

@rebel_ltz 6 лет назад

If I were you I'd hang around the ACE Cafe.

@reece_bhc1056 6 лет назад

Hey brotha shoot me an email reece151@aol.com or dm block on Instagram and we will get you going brotha

@cristianvigueras2757 4 месяца назад

Do you only have to bleed the lines if you’re changing for the extended brake lines? For example if I change my bars to the stock ones I don’t need to do this step?

@Asxzasf 6 лет назад

Thanks! Loved the tutorial, great job. I thought you had merchandise for sale from blockhead...

@yudhistirabaso6221 6 лет назад

Can you make instruction video for z dragbars wiring installation.. i will very appreciate it..

@BushRat253 6 лет назад

How is he liking those bars? I like the way they look but I always wonder how they effect the feel of the bike for a newer rider.

@tylernorthcutt8122 3 года назад

You think the other cables would be good for 10"?

@kurtbacosa5587 Год назад

Ok I got confused. Did you say 6” bars would need new cable but for 8” stock cable is fine? Also is it more Comfortable compared to stock? Like you’re not leaning too much to the front? Thanks man and great vid as always!

@SevenDragonBall 5 лет назад

I follow your steps and I success install it ,Thank you and your assistant!

@younonguyen5183 3 года назад

Blockhead, I’m needing an advice on installation of drag bars on sportster 48. Do I need to buy risers for it to clear the upper fork nuts? And do I need to relocate the front turn indicators? I remember you had a 48 so I figure you be the best person to ask. I can’t find concrete info. Thanks again

@DuKeEst 6 лет назад

Sweet dude.. i will be going to do that job . In few months.. soo i appreciate the video. Good to see what i have to go throw !

@TonyMyersxx 4 месяца назад

Can you provide a new link to bars. iv looked on amazon and i cant find the style you have. they have multiple "z bars 8 inch" but without the dimple and nerald middle.

@djohnson3678 6 лет назад

lol, the line is '' aired '' , de-bled ... not bled. a hooked or curved awl would have worked as well. awsome woman handling that grip! , i felt it bottom out from here! xD lol, dinner time! huge pause from the cold, i dont blame you. kool that Ms. Blockhead helped with mechanic skills.... HOT! , lol , that is a plus. super awsome vlog!!

@GreatEgret 6 лет назад

Scorp I was going to make the same comment. Easy mistake, though. The bleeding process can be tough if you've never done it. Add the distraction of vlogging, I'd make the same verbal mistake.

@djohnson3678 6 лет назад

verbal mistake?? on what part?

@GreatEgret 6 лет назад

Scorp Sorry, I should have said "mispoke" rather than verbal mistake. He probably knew what bleeding brakes lines means. He likely misspoke. Happens to the best of us.

@djohnson3678 6 лет назад

yeah, to true, it happens to me as well. however i meant do disrespect to you or him when mentioning it. tk you for your response , it is appreciated.

@GreatEgret 6 лет назад

Scorp No worries. Didn't think you meant disrespect. Ride safe, my friend.

@Scooter3194 3 года назад

My stock brake cable is 39 1/2” long I want 8” z bars what size brake cable do I need 42” or 44”

@chriserrazuriz6666 6 лет назад

Good video! Z bars look great!!! I'm getting some for my Yamaha bolt.

@Tarrnation 6 лет назад

Nice Bars ! Awesome job well done.

@uscg1381 5 лет назад

Beautiful! Getting them for my bike!

@jaycooljay78 5 лет назад

Hi mate do you have any videos on how to internally run wires into hollywood bars on a Iron 883? i'm swapping drags to hollywoods and needs help on how to run the cables through? cheers!

@joetroutt7425 5 лет назад

I'm sure you're done by now but I'm sure you had a wonderful time getting the wires ran. Just did mine. I invented some new swear words.

@jaycooljay78 5 лет назад

@@joetroutt7425 LOLOLOLLL to be fair it was quite easy in the end!! i must have been lucky! the hardest part was trying to fix the bars back on while holding them at the same time!! that's when i called the wife in for support lol!

@andybarrera4135 3 года назад

So if I buy a 8 inch Z bar, the only thing I gotta replace is the break line?

@jasedavids Год назад

Did you not have to extend the wires to the controls i have a 2004 and the wires seem tight is there extra length somewhere you can find? I have the favrory 6 inch riser

@dherko 2 года назад

So did you not have to get longer throttle cables?

@jeffro1245 6 лет назад

Should of routed that throttle cable back behind the fork. Looks like crab in front of the turn indicator. Just my 2 cents. Great video.

@herb3rtron226 3 года назад

Where’s the electrical line runs on the new bar?

@denizcanercil1217 Год назад

I have a 2020 883 and I bought a z bar but the only thing that’s stopping me from installing it is I don’t know how long of a break line I need can anyone help?

@jonbonjovi6912 6 лет назад

So the little brass piece. Does the solid part face towards you or away from you when you put everything back on?

@chriscichy1845 6 лет назад

Got a question for ya boss not the best or most knowledgeable guy with motorcycles as I am new to them. For the new break lines and such what would you prefer is a good time to get new ones ?

@grave1er 6 лет назад

Ima pure blockhead fan

@planefloat 6 лет назад

Hi, a very detailed installation procedure! Have you had a chance to try it out on the highway? Is the more upright sitting position more or less comfortable at 60-70 mph? I have ordered 12" Z-bars for my '06 Sportster, the 8" or 10" may be a better choice. Did handlebar vibration change?

@orangindonesiatinggaldiame6420 5 месяцев назад

hi I just bought 2021 sportster 48. why does it idle so high. any tips? thanks in advance

@MrRollie51 6 лет назад

I like the Z bars much better than the Drag bars Hey great video!

@TheBearista 6 лет назад

Looks great! how did you set the angle of the bars? was it just personal preference or did you try them out?

@michaeltayer6857 4 года назад

im planning to change my handle bar to 10" Ape Monkey Hangers Handlebar. May i know if i need to change the complete cables or the brake front cable only ? kindly advise

@hogginwithpa5603 3 года назад

Long time watcher ! So about those little brass by throttle / clutch cables , say you did lose them, any idea where I could locate new ones ????

@Paynita 6 лет назад

Does the handle bar need to be dimpled or not? I am upgrading my 2015 48 Sporster and shopping around bars. Thank you!

@coyrodgers 6 лет назад

Would you have to change any fluids or lubricants if changing clutch cable??

@69FOSTER 3 года назад

How do the Z bars affect the riding position vs. the stock bars? I have a 2018 Sportster 48 with stock handlebars and at 5'9'', I'm leaning forward more than I'd like and would prefer to lean back a little more and be more upright.

@JohnBraman413 4 года назад

how high of a handlebar can you go without having to change the cables?

@djmysticalone321 6 лет назад

So the only cable you had to change wa the brake line

@cnikola227 4 года назад

Do the riser bushings have to be replaced when replacing bars?

@BlueRogueDragon18 4 года назад

How does she like riding with this z-bars and could I fit a front cal light cover? With those on? Cuz I have the slats light cover and want to put a cal on top of that.