How To Join Copper and Aluminum-- Solderweld Al-Cop Tutorial 

thank you brothers teachers.❤❤

If you are not speaking directly to the viewers don't look at the camera when there is someone else with you pay attention to them. It will come across much better.

Good day şir what kind of rod uşe to braze alluminum and copper, thank you

Wouldn't flow at all for me, it wouldn't even stick to the aluminum tube, even with added aluminum flux, and cleaning with acetone prior to heating

🙏🙏🙏🙏🙏🙏🙏

The popups in your video are very annoying. Otherwise, a good video.

How to order

Thanks man...Good Job on field!

insert meth joke cringe....and go! Bet that humor is hit or miss...no inbetween...with the ladies or whatever. hehe Enjoy the energy, and info. thanks!

Al cop combination of aluminum and copper rod, am I correct sir? Thank you.

Very good bro today frist time i doing this but i am not sucess but i will try

Thank you very much for showing that, now I know how to do it.

Too much heat melt aluminium

Bro just failed to join those two today im so bummed i could not finish my job today because of 1 joint. Its not as easy as it looks guys

Thank for this video now am I doing it for my self

Keep it up guys... This is very educative

Sorry to say the main thing you didn't saying .... Iam ac mecanic I joined copper and aluminum pipe in American freeze.. Main thing ia flux.. And heat temperature. Copper must be high and aluminum must be low. Ok

Product name

Problem with this i am finding out is if there is oil in the lines and its say a vertical pipe and its steadily running that joint is impossible to not ha e oil leach through thw Al- cop. Not forgiving at all with contamination! Fyi

What protection do you recommend in this procedure in a residential freezer? The plastic liner can melt if too much heat is applied.

Where can we buy the AL COP BRAZE

Thank you so much for sharing this video my friend. Plss take care

can you send the name of the tool thanks

I was once at an industrial show where a guy was demonstrating a magical solder that he claimed would make a great joint to aluminum. He was demonstrating by soldering a piece of aluminum to a piece of brass, and he used no preparation of the surfaces. The solder flowed very nicely and made a beautifully filleted joint to both metals. He gave me the soldered sample and had me push hard on the piece so I would know the joint was strong. I took the sample back to my office and put it in my desk drawer, but I didn't buy any of the solder. After some years of just having the sample sitting there in the drawer in a benign office environment, I picked the sample up one day and the aluminum popped apart from the brass when I barely applied any pressure at all! I hope your material works better than his.

Where can buy that aluminum rod

Had you pulled off the copper polish before this much heat would not be required.

Should use nitrogen when braze aluminum to aluminum? Thanks

Don't copper and aluminum galvanically corrode each other?

Great

which chemical/liquid did you check for the leakage?

Dude on right is 100% sales and 0% field experience

How to prevent corrosion on the joints? Wd40, vaseline? Silicone grease?