I am so pleased I found this. I was right in the dog house after cutting the telephone wire instead of a defunct alarm wire. Mrs going crazy cause she can't watch Netflix. Got some Jelly crimps and the crimping tool, fixed in ten minutes. You sir are a legend !
You are my hero! Removed an ‘old cable’ to prep a skirting board for painting and quickly realised it was supplying the broadband 🤦♀️ Jelly crimps are the best! Thank you!!
Thanks for the video. I didn't have any of the clamps so I just stripped the wires and twisted them together and covered with electric tape. Somehow my internet is stronger now!!
Hi mate don't suppose you can help... In the back of my socket I have blue in a and blue/white in B. Further along these have been joined at a box, but the other cable going back to (I presume) the cabinet, is orange and white cables...
If I have removed an extra phone jack from a bedroom but no longer require it what should I do with the wire ? Leave it in the wall once the face is off ? Or wrap it in electricians tape ?
CAN I USE THE 3-WAY JELLY CRIMPS TO SPLIT MY INCOMING PHONE LINE WIRE - SO I CAN FIT 1 PHONE SOCKET IN MY LIVING ROOM - AND A SECOND PHONE SOCKET IN MY BEDROOM???
that was similar to my question which brought me here ! the difference is that I want to split my incoming phone line into 2 lines, each connecting to a router.
Can i use this to extend the telephone {black cable}, is it enters the House {in UK}? Also, should the Router be plugged into the Master or secondary ~ or does it not matter?? Thanks, Chris
Help so I got main cable coming into the house going to a little junction box two cables one is black one is green going out the other side is blue and orange? Thus cable goes to the main box on the wall ? My main cable is damaged from out side ,so I bought new cable and it's like the cable you got there ,so what colours do I use, as bt can't get to me for 10 days
Thanks Adam, if it's outside I would join the cables using the jelly crimp method and then place this join in a junction box suitable for an outside environment. Please subscribe to our channel. Tom
Can I split (divide / share.. I don't know which is more correct!) my incoming phone line into 2 lines, to connect each to a separate router? If yes, how please .. Thanks a lot ....
I have a question regarding my telephone line length being artificially longer (around 10 meters or so) from the intrusion point. I was thinking of having it shortened as I feel it is too long and may affect performance+reliability of my broadband. Do you think a reduction of 5-10 meters of copper length to the telephone master socket would make any difference to broadband performance such as noise margins? If I was 100% certain that my 10 meter length of copper cabling didn't have any negative impact on performance/reliability then I probably wouldn't need to install a new telephone line to have it shorter. I could try and cut it myself manually to reduce the length, but I am worried to do that as I am not a professional and could end up accidentally breaking it unless an Openreach engineer could do it manually. But I don't think they would do this for free hence why I was thinking of a new line to see if there would be noticeable improvement in speeds/reliability. Also I have this BT junction box exactly like in this video. I'm willing to follow this guide, is this junction box necessary? Can I get rid off it completely and just connect the line to the BT master socket?
Yes you can....just apply pressure with your crimping pliers (the tool he uses) to the side of the crimp (jelly connector)instead . Squeeze slowly and it will pop open, just watch your eyes as the top can pop out quick
Hi Louise, glad the video helped. Sorry I do not understand what "cease jelly connectors into" means? Yes on the junction box, the second cable can be terminated into the other side of the junction box. Needs to be the same corresponding number for each cable. Or you can patch the cable straight on top of the other one on the same side of the junction box.
the quality of the video is terrible, it's "out of focus & distorted" and the camera is up far too high, and parts of the assembly were NOT shown?? i recommend you to re-do the video and CHECK IT BEFORE you post it, as it is IMPOSSIBLE to view??