I pulled one rail out of the sleepers by approximately half of one length of
Peco code 100 flexitrack.
I did the same to two more lengths of track.
Damage occurred to each pulled rail, so this was shortened.
Then, I filed to remove burs for easy of insertion to the other length.
Pliers helped pull the rail into the chairs on the sleeper.
Once the end was closed, couples were added AND crimped with the track cutters.
▶️ LIKE 👍🏻
▶️ SHARE ✅️
▶️ SUBSCRIBE 🔔
▶️ COMMENT 📣
With the three lengths attached to each other, it was time to introduce a curve.
This helped solve an issue I've had for two years not knowing the best way forward.
With joints opposite each other on a curve, there is attendance for the rails to create a corner rather than a curve.
I would recommend this to anyone.
6 окт 2024