How To: LG/Kenmore Tub to Pump Hose 4738ER1002A

Подписаться 231 тыс.

Просмотров 69 тыс.

50% 1

How To Replace: LG/Kenmore Tub to Pump Hose 4738ER1002A www.appliancepa...
Symptoms: Hose has a leak; getting water on floor
Tools: Phillips screwdriver, flathead screwdriver, pliers, vice grip locking pliers
This LG/Kenmore made Washer Tub to Pump Hose replaces the following older part numbers on LG Washers: 1266823, 4738ER1002.
Buy the new Washer Tub to Pump Hose 4738ER1002A here: www.appliancepa...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@TheMarcoParent 2 года назад

I followed every step in this video and it worked perfectly. A 22$ fix that saved my LG washer. Thank you so much, this is amazing :)

@casualuser2010 2 года назад

Great tutorial, I’ll be doing this when my part comes in. Thank you so much.

@MissChiVUs1 2 года назад

Thank you for the detailed reassembly instructions. I took my machine apart to find the intermittent leak issue. Sadly, it turned out to be the small hose beside the filter (which could have been removed, cleaned, replaced without disassembling the whole machine). Anyway, the disassembly instructions were great in the video I followed. Reassembly instructions were not as slowly covered as easy though. Thankful I found your video.

@debbiedavis3844 4 года назад

I loved the close up shots. I finally found the spring.

@split3ways09 8 лет назад

I replaced mine with out turning on the machine on the side or any of the other steps. This is a great video but I just took the back off and got all the clamps off out the back. When you take of the back, the end of the hose closest to you is attached to a white plastic piece. It has two screws in it. I just removed those and it gave me a little more wiggle room to work with. I am a woman so I don't know if it helped that my arms are smaller but it was not too much of a problem for me. This is my second go at working on this machine. Not a whole not to it. Save your money and fix it yourself.

@appliancepartspros 8 лет назад

+split3ways09 Awesome, thanks for the tips!

@sdfgertvbh 3 месяца назад

Mine was a disconnected drain hose, which was missing a clamp. Great video though, helped me with disassembly.

@appliancepartspros 3 месяца назад

You're welcome!

@stajicmita4731 3 года назад

Many thanks! It was a very details video. Well done.

@tdeveritt 5 лет назад

you can replace this part without removing the front of the washer

@kevbeek1 Год назад

I can do this. Could it be the other hose next to it, the drain hose? How often is the drain hose?

@MistyWoman4 5 лет назад

Hi all, I am trying to find info on where to buy the replacement tub to tube hose on my Pan50SW/pan/70sw. Can’t find any info. I’m wondering if there might be a universal hose? Thanks much for any help 😀

@AdamDempsey 7 лет назад

It's good practice to disconnect electronic connections by pulling on the plug rather than the wires.

@AnthonyLozano 9 лет назад

Is there a good reason why you can't just put the washer on its side to perform this repair instead of removing the front cover? Will placing the washer on its side damage the washer?

@appliancepartspros 9 лет назад

Anthony Lozano If you tilt the machine you must put in the shipping bolts, and only tilt it to the sides never the front or back. Without the shipping bolts the tub could come off the suspension and that would cause a lot of problems.

@AnthonyLozano 9 лет назад

AppliancePartsPros Thanks! Luckily I kept the shipping bolts.

@ekummel 7 лет назад

It looks like you can get to all three clamps from the access panel in the back. Just remove the screws to that white plastic thing and you can then get to the top cup clamp. Once that's removed, you can then get to the clamp at the front. This 14 minute video looks like it can be reduced to just 5 minutes if you go through the back panel exclusively

@appliancepartspros 7 лет назад

Thanks for that tip!

@swd68 8 лет назад

Is it not possible to do it from under if the washing machine is jacked?

@appliancepartspros 8 лет назад

+swd68 If you tilt the machine you must put in the shipping bolts, and only tilt it to the sides never the front or back. Without the shipping bolts the tub could come off the suspension and that would cause a lot of problems.