HOW TO LOWER YOUR BMW | BC Extreme Low Coilovers Install 

Curious to see how they fair for everyday driving on michigan roads. Been eyeing a set of SX coilovers for my 335d. Great content as always man, looks great!

Love the how-to videos, Justin. Great result, too!

The new wheels are insane 🔥😍

Will you ever do an LCI conversion of the headlights, hood, and taillights? Great stuff Justin... stay safe!

You already know my feelings on this. 🙃

"Quarantine garage" lol good one! Informative video!

Hey bro I just got a 335I about 3 months ago Love your channel I'm just getting started was kinda suspect about your rims but then saw this video today love them good job the car looks great keep up the good work look forward to your next video 👏👏

Bro! When you put your new wheels on I did comment about them being 'kinda' boring. I retract that comment. Slammed with a beautiful fitment now???? Dope! Stay safe bud!

great video, did my coilovers last summer, had some difficulties because my standart suspension wouldn´t come out without hitting my front fenders, looks a lot easier in your video greatings from Germany

So recently bought into a 06 330xi and stumbled across your page and tbh this is the best content I could ask for, for everything DIY related to mods. Makes me fall in love with this model more and more thanks for the content and keeping up on it after so many year man !😁

Great vid, you’ll like them I don’t have the extreme low, but I love mine, have mine adjusted so the car sits low, but still have the OEM quality no bouncing around, once I finish up with upgrading the sway bars, bump stops and bushings, then I’ll adjust the dampening to compliment the other parts. Can’t wait to hear you take on the BC’s

Looks good, you need an electric impact in your life haha. You don’t even need to touch the Allen on the shocks if you have an impact the shaft won’t spin

By far best installation video I found

This is the content I’ve been waiting for man. Great video, well shot

Did you have Bilstein B8 dampers installed before the coilover install ?! I’m asking since B8 are known as very good performance dampers - so I’m asking myself if the coilover actually is a better ride?...or just a lower one ?!

Adjustable coil-overs , love everything about it ! Weight reduction too

i have this exact same car with x drive system aswell. i got the bc extreme lows but when i maxed out the coils to the lowest setting my front axles didn’t like it and would have def broke if i hit a bad pot hole. any recommendations? it’s impossible to go super low with x drive 😭

damn you brought the chrome back too, the vision is starting to come together.

Love the stance justin 🚘😍 and those wheels 🔥

Need to do this to my e92. I have the original ones and it’s time for a change. How long was the total time and I’m glad you had a friend to assist you. Sick ride bro! Last night I did a total coolant flushed. Haven’t seen you done one. Highly recommend it - only took me two hours.

Oh snap, I'm putting some st coils on my m3 this week too 😁 looks mega dope brotha good work!

12:12 That "I'm helping" face XD, cool wheels tho, at first i thought what the f is he doing, but whenever i see them I start liking them more and more

Like I always say, such clean work.

THANK YOU this couldn't have been better timing I am just about to order coilovers for my 335xi 🙏🙏🙏 car looking nasty as always!

Those wheels and the fitment😩 clean ass e90

glad i found this... might actually try it myself now rather than take it to a shop

Have you ever made a video on how to raise / lower the rear? As it is a separate coil and shock setup

Good job jb but quick question what goes at the bottom of the spring on the rear

Car looks sick! Just wondering, what spring rates did you get for them?

Great vid. Maybe it’s just the way the video was shot but when your friend was trying to loosen the rear upper nut he was tightening it, turning it to the right. 😐

Do you need to upgrade anything else when putting coils on these cars such as control arms or bushings or anything of the sort? I have an x-drive model not sure if that matters

Clean!!! 💦 liking these wheels the more I watch

I have a question of this coilover. What is the leftest parts which looks like gold rings next to spring, when you introduce the parts at 1:06? Even you seems like didn’t use it.

I think you should invest in some FL taillights. They will really change the look of the car.

definitely not my cup of tea but I must say it came out a lot better than I was expecting, good shit as always.

Great Video Justin, sorry about you back.

I'm getting my bmw 320i soon and all I want is to make it unique

Did you reuse the oem sway bar end links? Or did you swap them out with the bc racing ones ?

would you say these are more worth it than the lowering springs and shocks and struts ?

Great video Justin 👍👍👍 Thank you.

just so you know, you stripped the allen on the rear strut because its a 6mm and you guys used a 5mm. Other than that great job!!

good video but id like to take a second to all watch at 11:30 when your boy turned it the wrong way and stripped it lol

What are those other aluminum cups with the rubber gaskets on them? I got a kit for me xdrive e90 and idk what those other 1inch metal spacers are for?

you should get an afe intake. have one on my 325, and i love it!

Justin! Those two golden rings that have their own boots that are shown at the very beginning of the video, starting @ 00:58 seconds in the extreme lower left. Do you know of any use for those? I see they fit onto the rear springs instead of the rubber boots that you can see are placed on your rear springs at that same second mark. Are those just to make the spring even stiffer? I can't find any info on those and @ 13:51 yours don't have them on there so I'm assuming you just left them laying around somewhere?

@Justin Buice What did you have on there before? A cup kit? Looks like the B8 or B12?

Seems like more hassle & money than it’s worth. I have a m sport e90 & the gap is already minimal enough. Would it not be easier to buy one inch size bigger wheels (with the correct fitment of course)?

Did you have to change the front links ??? Because I got bc on my car my oem link are to tail I had to get adjustable one to go low. Cause the OEM was stopping me from going low

I live in Slovakia, and the government basically doesn't allow any mods. If you add anything, that the original car that came from the factory didn't have (change wheels, turbos, etc.), you'll get into trouble... LOVE YOUR VIDS

you can get the 13mm nut off with an open end wrench, this way you dont even have to take off the strut brace

When you adjust the rear do you have to reset preload again or can i adjust the height like a few mm or so without having to do all that?

to adjust rear, which way to you spin the lock collar to loosen? Same as front or opposite direction.

Were the set of coilovers for the rwd and they fit for your awd or did you find an awd specific coilover set? I cant find an awd bc racing coilover set fory 335i xdrive and the regular 335i says it wouldn't fit the awd models.

What kinda spacers u got? And where u get them from?

Hi, I have a quick question please can you tell me if it's okay to buy the E46 Android to install on a BMW3 316ti compact. If can't please recommend an alternative. Thanks

I have question iv just installed bc racing a week ago amd i have a loud thus noise coming from the front passenger side every time i go over a small pot hole or bump at a certain speed amd above any ideas

Is the review video coming anytime soon? Looking to install them on my e90 also!

What spring rate do you have? Nice e90! 😉😉

Do you have the link for the spacers and the longer lug nuts you got for your Bimmer?

You have hole in the middle covered with plastic cover to remove middle not.. you don't have to remove the whole filter assembly

What spring rates you went with? Thanks loads

I do love the Your content it’s awesome

I always admire your editing skills and videography 🖤 And 1440p on my phone! Was this shot on 4k with the EOS R?

So clean bro!

The netx video show where do you put the water 💧 in the car please

Did you install your stabilizer link into the coilovers

Just curious if u sold the Bilstein struts already?

Men love your videos, and your BMW its look clean! Hope to get one again :D Peace V

Dang bro I didn't know you had such problems with the old suspension haha. I'm glad I don't live in Michigan with all of that rust 😅

Those patrick star 5's are killin me xD

@Justin Buice how is the ride quality? More comfortable than the Bilsteins or about the same?

Where did your window trim chrome delete go?

I wanna go lower than this, so what coilovers can go lower?

I have the regular bc’s but they’re are max low in the rear, if I got the swift spring upgrade for the super lows, would that make me go lower?

Gotta do a engine cleaning video next 👀

would this work with front and rear spacers?

Where is the custom spring rate option?

Oh crap he did it 🤣. Might have to copy you on my e90 now lol. Looks good as always bro👍🏼

Life hack 13:54 if the back still too high do not put this you loose adjustability but you go low low

How do you adjust the rear height?

How long does it take to be shipped to your door?

Where can I get that beat in the beginning of the vid?🔥

Thank you for all your VIDEOS ✌😎👍🔧🚘 E90 life🚥

looks a lot better!

Hi there! First off I would like to thank you for all the great videos you make I’m a huge fan! I also got almost the same car as yours except it’s an LCI 2011 328i xDrive and it’s Alpine Weiss. I’m in the dilemma of upgrading my OEM suspension to stiffen up my ride and closing my fender gap as well since I’m running 18x9 ET 31 Apex EC-7 wheels in the summer. I can’t wait to see your review on your BC coil overs so I can sort things out about going with coil overs or your old setup (Bilstein B8s with lowering springs). The dilemma here is that We have harsh salty winters here and I want my car to stay my daily all year 😉

What are the tightening torque spec for the 3 bolts on top of the struttower?

You thinking about selling your old bilstein/h&r set up?

I need help I’m trying to buy a bmw but which one? That will last with me and not breaking every time

How would you rate the extreme lows

My 09 335i was slammed on coilovers and it made parking that hoe a nightmare. Nearly ripped the front end off my car 4 times.

u need side skirts, lci hood, and lci front double slotted grills😄

what wheels are those

almost dialed in... spacers, alil more camber in the back... she'll be sittin pretty

these will work on a 11 e92 328xi right?

Fiyaaa🔥

Keep your b8 and send them out to fatcat motorsports for revalve. It's expensive. Look them up.

Thanks Buice🫡

WHT KIND OF RATCHET ARE YOU USING?

Lemme grab your old bilsteins! Lmaooo From a broke enthusiast to a successful one ;)

Justin give us 360 view on the car out side the garage