How To Make 1000 BioThane Dog Collars 

Hello and thanks for asking.. The answers to your questions are yes the gang punch will be able to make the holes for rivets, and yes it will cut through the faux leather... at least I would assume it would. You would not need the Handyman Press unless you were going to use it for riveting. The handheld punches are tricky. Some are better than others. but they are designed really for leather and not BIO. We just did a little video on this....ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FVkh4qMaHgw.html Have a great day and I hope this helps!

@@BioThaneCoatedWebbing Thank you very much that is helpful - I appreciate this!

Thanks for asking Alissa. You can make collars with hand tools as well. We have a video "How to make a BioThane dog collar" on our channel. IN that video you can see how to make a single collar using hand tools. I can also tell you that the Handyman Press seen in this video is very affordable and is not too big or heavy. And the best part is you can make collars pretty fast and with great quality. I hop this helps!

I believe it is however contact Marlin at Strapwarehouse (330) 776-8225 just to make sure! Thank you for asking.

Hi and I am sorry for the delayed response!! The hole sizes depend on the size of the buckle tongue. Also the rivet post diameter. Generally, .187" hole size is a good starting point for this. I hope this helps!

You may use the splash OR the capped rivet with the Handyman press. The capped rivets seem to look better and may be a little stronger.

Hi Nia, Great question! The list depends if you are planning to use a Handyman Press or a Gang Punch press. Ether way below are some links of where you can buy these tools and also video links as to the individual parts you can buy separately. I hope these help and let me know if you have other questions! To purchase Handyman and parts go here: strapwarehouse.com/the-handyman-press-hand-riveter-punch/ To purchase the Gang Punch Press go here: strapwarehouse.com/gang-punch/ To watch a video of Handyman accessory parts look here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1QG16rptxHc.html And to see the Gang Punch parts you can buy look here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XqNJG8UpcD8.html

Nia there is also buckles and rivets for sale here: strapwarehouse.com/buy-hardware/ And of course Beta and Gold Biothane :)

Hi Franny and great question... Designs on BioThane are typically sublimated onto the raw webbing like the one you see in this video. We do not sublimate in-house but there are a few great sublimated printing companies you can contact. Yellowdog Design and TransTex are two good ones. Our minimum run on a pattern is generally 3000 feet. Hope this helps! Thanks again:)

Hello and great question! One we get asked frequently. You may seal the ends with a hot plate. Make sure you have plenty of ventilation. You still may see some webbing. To date, there is not a great way of totally sealing the ends in order to hide the webbing. Sealing the ends and holes to cover the webbing is cosmetic but not sealing them will not effect the overall quality of the product. We recommend using the sharpest cutting tools to achieve clean crisp ends and holes with no webbing fray. I hope this helps some!!

Hello! Great question.. The Super Heavy works on these presses. You may need to have the scissor guides adjusted so they can accommodate the thicker coating.

Great question! Sublimated BioThane patterns are available and in stock here: strapwarehouse.com/3-4-camouflage-gold-high-flex-biothane-clearance-limited-quantity/ If you want to print your own sublimated pattern then contact Haden for all the requirements you need for your own patterns to be printed and then coated with a clear coating. haden@biothane.us I hope this helps!!

@@BioThaneCoatedWebbing Are you able to do custom colour coating?

@@littlebee9325 At this time we do not do any custom colors. Thank you for asking and check back for this in 2022!!