Тёмный

How To Make A Manual Winch | Homemade Powerful Manual Winch | DIY Winch 

Diamleon Diy Builds
Подписаться 558 тыс.
Просмотров 671 тыс.
50% 1

How To Make A Manual Winch | Homemade Powerful Manual Winch | DIY Winch
Hello Everyone!
Today I show you how to make a manual winch. This homemade winch is a manual operated winch. This diy winch is very powerful. This diy manual winch is very simple to make at home. This diy winch lift is very cheap to make. I used scrap metals to make this diy winch. This homemade manual winch is very small and compact in size. Also this diy winch is less weight so this homemade winch can be very easily portable from one place to another place without any effort. This homemade winch machine is used to lift heavy weight. This homemade manual winch can also be used for heavy duty applications. I used sprockets and chain to increase the torque for this diy winch. I made a ratchet mechanism for this homemade winch. This diy ratchet mechanism is fixed to this homemade manual winch. This diy homemade winch machine may looks simple but it really performs very well. I personally enjoyed myself while making this diy winch build. This homemade manual winch really works good. I hope you guys will enjoy this making of diy homemade manual winch machine build
Click here to SUBSCRIBE Diamleon Diy Builds:
/ diamleondiybuilds
Support me on PATREON:
/ diamleondiybuilds
Social Media:
Facebook: / diamleondiybuilds
Instagram: / diamleondiybuilds
Twitter: / diamleondiy
Contact Mail Id:
diamleondiybuilds@gmail.com
Thanks for watching
Hit LIKE & SUBSCRIBE button
#diamleondiybuilds
#homemadetools
#diytoolshomemade

Хобби

Опубликовано:

 

2 мар 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 113   
@vinceianni4026
@vinceianni4026 3 месяца назад
Hello mister beautiful idea good job well done
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Thank you very much dear
@jimgree
@jimgree 3 месяца назад
I like lock nuts also, good to see a job done right
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Thank you very much bro❤
@user-sh4cl8pj9f
@user-sh4cl8pj9f 2 месяца назад
فنان رهيب عاشت ايدك
@dimasdasilvamiranda4976
@dimasdasilvamiranda4976 2 месяца назад
a idéia é muito boa valeu obrigado Deus te abençoe sempre você e sua família
@yogabala7443
@yogabala7443 2 месяца назад
Tamil 18:27
@DiamleonDiyBuilds
@DiamleonDiyBuilds 2 месяца назад
What bro
@joaorosadecarvalho6000
@joaorosadecarvalho6000 2 месяца назад
Parabéns pelo vídeo, muito importante.
@DiamleonDiyBuilds
@DiamleonDiyBuilds 2 месяца назад
Thank you❤
@JoseCarlos-ip5rc
@JoseCarlos-ip5rc 2 месяца назад
Excelente, vou salvar esse vídeo.
@DiamleonDiyBuilds
@DiamleonDiyBuilds 2 месяца назад
Thank you very much dear
@Xmen-tk9px
@Xmen-tk9px 3 месяца назад
I am following you from the country of Morocco. I have a request if you could show us how to make a feed crushing machine. I do not mean grinding it, but to make the size of the feed smaller and thicker so that chickens and chicks can swallow it easily.
@josejohn3006
@josejohn3006 2 месяца назад
Super, strong!
@DiamleonDiyBuilds
@DiamleonDiyBuilds 2 месяца назад
Thanks man❤
@adilsonalves2909
@adilsonalves2909 7 дней назад
Ótimo trabalho
@DiamleonDiyBuilds
@DiamleonDiyBuilds 7 дней назад
Thanks man ❤
@wahidtrafo6009
@wahidtrafo6009 3 месяца назад
I have followed dozens of your creative videos with all the complete extraordinary work facilities, we really like it, thank you for your knowledge, it has inspired many people
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Thank you very much bro❤
@mrdash1735
@mrdash1735 2 месяца назад
Good job 👍
@DiamleonDiyBuilds
@DiamleonDiyBuilds 2 месяца назад
Thank you very much dear
@leepatton1180
@leepatton1180 3 месяца назад
Nice job
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Thanks man❤
@Bianchi77
@Bianchi77 2 месяца назад
Creative video, thanks :)
@DiamleonDiyBuilds
@DiamleonDiyBuilds 2 месяца назад
Thank you very much dear
@user-qt4tf6xh2g
@user-qt4tf6xh2g 20 дней назад
It wad interesting,✋🇰🇿
@idecreativ87
@idecreativ87 3 месяца назад
Sangat kreatif dan sangat menginspirasi, terimakasih sudah berbagi
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Thank you very much dear
@ROVITTv
@ROVITTv 3 месяца назад
Very nice
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Thanks man
@user-bk1ft2be9u
@user-bk1ft2be9u 2 месяца назад
Такие ролики приходится смотреть по два раза, если он заинтересовал тебя, первый раз начало и конец, чтобы понять насколько интересен для тебя результат работы, а дальше пересматривать если интересен. здесь можно сделать пару усовершенствований, первое. сделать съемную рукоять, и на валу большой звездочки сделать второе крепление рукояти, -- если груз легкий то можно крутить и вал большой звездочки, у меня магазинная лебедка, и рычаг привода не намного длиннее чем рукоять с видео, а лебедка без дополнительной звездочки поднимает более 1000 кг. А так идея хорошая.
@medianmuhnna7249
@medianmuhnna7249 2 месяца назад
Great job. but long video 🎉
@DiamleonDiyBuilds
@DiamleonDiyBuilds 2 месяца назад
Thanks man❤
@davelynn4993
@davelynn4993 Месяц назад
Very nice design, Good leverage with speed reduction. I've modified a winch that I bought and added a hex nut. The put a socket on a cordless drill and quickly reel in the cable after use.
@DiamleonDiyBuilds
@DiamleonDiyBuilds Месяц назад
Thank you very much
@jairomota5825
@jairomota5825 3 месяца назад
excelente
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Thank you very much dear
@HariHaran-nk7ji
@HariHaran-nk7ji 3 месяца назад
Great winch man awesome!!!
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Thanks dude ❤
@Sandorvalsiepiereki
@Sandorvalsiepiereki 3 месяца назад
Muito bom mesmo.
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Thank you very much bro
@tonymixvlog7554
@tonymixvlog7554 2 месяца назад
very nice lodz
@DiamleonDiyBuilds
@DiamleonDiyBuilds 2 месяца назад
Thanks man❤
@asressaraia2340
@asressaraia2340 Месяц назад
very practical and useful. Maybe you can do a second one with a small electric motor- detachable ? thank you
@DiamleonDiyBuilds
@DiamleonDiyBuilds Месяц назад
Thank you very much bro❤
@hmarvin3791
@hmarvin3791 2 месяца назад
Y cuando le quita el seguro como hace para que la carga no se caiga ?
@user-mx3sl4bp8i
@user-mx3sl4bp8i 3 месяца назад
Можно вечно смотреть; На огонь.... На воду... И каким образом работают другие люди!!!
@joaobatistasevero8205
@joaobatistasevero8205 3 месяца назад
Paraben muito bom
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Thank you dear ❤
@user-vt2ml4du3g
@user-vt2ml4du3g 3 месяца назад
Можно вечно смотреть на три вещи - как течёт вода, как горит огонь и как работают другие!
@recepgumus21
@recepgumus21 3 месяца назад
Very Good work.The only problem when lowering the load.You can not lower the load halfway.Otherwise load will drop with high speed. so it is danger,I think.
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Thank you very much bro
@Ropetangler
@Ropetangler 2 месяца назад
I must say that I prefer some preamble on a project like this. A brief description of what you are doing and what materials, sizes etc involved. I also prefer to have a project which bolts together than one which is fully welded, it makes for much easier changes to design or parts replacement, but having said that, welded construction is quicker (but dirtier), so perhaps there is a place for it. The fastening of your winch rope is very rough, a wedge and becket would be much better and neater also, even a couple of grub screws would have been better IMHO. Also your rope clamps looked to be installed incorrectly. The U bolt should always go over the rope end which is not loaded, and the loaded end should be fitted to the saddle of the rope clamp. It is good practice to have at least 3 turns left on the drum before any load is applied, better still around 5 turns, so the rope won't pull out of its anchorage as you take up the load. I know that you had more turns on in your demonstration but some of your followers may not be aware of this issue.
@404nouserinformationfound
@404nouserinformationfound 2 месяца назад
Instead of the cable clamps drill and tap the shaft for a set screw, like real winches. And the shaft and bearings on the primary side could be reduced in size to decrease cost.
@gerardoreveles3156
@gerardoreveles3156 6 дней назад
Anyone here can make two of those for a car haulers trailers for 12k lb capacity and add a bolt to work with a impact torque
@victoraviles5002
@victoraviles5002 2 месяца назад
Un cable talves más grueso o un cabo de buena calidad pero igual esta excelente
@DiamleonDiyBuilds
@DiamleonDiyBuilds 2 месяца назад
Thanks man
@kjmonosr
@kjmonosr Месяц назад
nice work what type and brand of cutting wheel are you using on the hand grinder?
@DiamleonDiyBuilds
@DiamleonDiyBuilds Месяц назад
Thanks man❤. I use yuri brand cutting wheels
@karimmouhend5899
@karimmouhend5899 2 месяца назад
💪👍👍👍👍
@DiamleonDiyBuilds
@DiamleonDiyBuilds 2 месяца назад
Thank you very much dear
@wangherlangga2063
@wangherlangga2063 День назад
great ide but test winch strong 50kg, 100kg, 250kg etc
@DiamleonDiyBuilds
@DiamleonDiyBuilds 14 часов назад
Ok thank you very much ❤
@gerardokongjr5346
@gerardokongjr5346 5 дней назад
@DiamleonDiyBuilds
@DiamleonDiyBuilds 13 часов назад
❤😀
@tuskaghe
@tuskaghe 2 месяца назад
Everyone praises this project, but no one thinks about the danger it presents with great weight.
@johnbower
@johnbower Месяц назад
Because you let the welding current pass through the ball race bearings you now need to fit four new ball races :(
@nazirshaikh5620
@nazirshaikh5620 3 месяца назад
Supar sir
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Ok sir thank you❤
@alatt9232
@alatt9232 3 месяца назад
After lifting a heavy weight , how would you control and down that weight?
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
I used sprockets and long rotating handle to control heavy weight
@TheGoatShowMan
@TheGoatShowMan 3 месяца назад
I think ya needed a little more weld on that one part. 😂
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Which part
@ieatYTP59
@ieatYTP59 Месяц назад
i would use gears instead of the chain, to prevent failure
@DiamleonDiyBuilds
@DiamleonDiyBuilds Месяц назад
Thanks for your suggestion bro❤
@magnoeuripedeslourencodias3025
@magnoeuripedeslourencodias3025 Месяц назад
Quando for trocar o rolamento do lado da coroa vai ter que desmanchar tudo que fez.
@dianatuanama1276
@dianatuanama1276 2 месяца назад
No lo veo seguro por lo menos 2 o 3 transmiciones lo faltan cuanto mas lento mas seguro porque ai lo sueltas te chanca los huesos de la mano
@nguyentudat8202
@nguyentudat8202 2 месяца назад
Cái này kéo đồ nặng mà muốn nhả ra thì toang hết. Phải thiết kế chiều hãm nhả khi kéo nặng
@user-wh2ug7le8j
@user-wh2ug7le8j 2 месяца назад
Xin giá
@magnoeuripedeslourencodias3025
@magnoeuripedeslourencodias3025 Месяц назад
Mais uma cagada,o eixo menor ficou todo soldado,trocar rolamento ja era.
@Mwalaevans
@Mwalaevans 26 дней назад
See dont weld near berings u melt the greese inside
@RegiPavan
@RegiPavan 3 месяца назад
Can be dangerous when you release the locking ratchet...
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Not dangerous bro. It's very easy to handle
@dawnac6453
@dawnac6453 3 месяца назад
There's only a couple of problems with all these DIYs. He doesn't give the dimensions of the metal cuts and widths and other stuff and secondly,,, how many average people has the kind of tools like that lying around to be able to make stuff like that? LOL
@nancycook3733
@nancycook3733 3 месяца назад
Well I think what this gent is doing is good and it's up to you to decide how big or small that you want to do this hence the measurements, and secondly as tools go use the brain cells and make minor modifications and build it using what u have on hand, myself 3 different welders and different sized grinders so modification away I go, lol, and say instead of welding all together why not drill and bolt it together lol
@dawnac6453
@dawnac6453 3 месяца назад
@@nancycook3733 yeh well not everybody has a complete STEEL WORKING shop in thier backyards either. I'm not saying he doesn't do good work because he most definately does...but try doing it without all thise mills and lathes and drill presses. That's my point. The measurements would be a BIG plus... Not just showing a hunk of metal and expecting it to work. I don't build ANYTHING without some kind of measurements. I also have welders but not the fancy ones. Mine is only good for doing small projects. And your bolt and hole theory might work for some stuff... But not all. Just makes things much more complicated.
@sunil2102
@sunil2102 2 месяца назад
So if you want to get measurements you have to pay subscription 😅
@olegpoheretski190
@olegpoheretski190 2 месяца назад
он даёт нам возможность, когда мы лежим на диване,думать что мы работаем❤
@dawnac6453
@dawnac6453 2 месяца назад
@@jimmiecharley6505 very good .. GENIUS!!!
@Guzzi_Cali2
@Guzzi_Cali2 2 месяца назад
Very rough design. All welded. Half of these connections could be solved with bolts and nuts. The fixing of the rope with two clamps - NO WAY! Pure flub.
@shahzadnoor8266
@shahzadnoor8266 13 дней назад
Total time waster
@DiamleonDiyBuilds
@DiamleonDiyBuilds 11 дней назад
Why?
@maxinehardy9411
@maxinehardy9411 3 месяца назад
im starting to think youll never make an ice cream maker
@joseangelalatorrevelazquez4934
@joseangelalatorrevelazquez4934 Месяц назад
No estas usando la herramienta correcta
@rimisyih9051
@rimisyih9051 17 дней назад
Price?
@DiamleonDiyBuilds
@DiamleonDiyBuilds 7 дней назад
Sorry I'm not selling it
@jassalmedia6877
@jassalmedia6877 2 месяца назад
Demonstration not clear
@user-wh2ug7le8j
@user-wh2ug7le8j 2 месяца назад
Ib
@luciancostin1543
@luciancostin1543 2 месяца назад
Nu prea va plac șanfrenele în rest 10+
@albertoaparecidosilvasilva2767
@albertoaparecidosilvasilva2767 3 месяца назад
Não gostei
@DiamleonDiyBuilds
@DiamleonDiyBuilds 3 месяца назад
Why?
@albertoaparecidosilvasilva2767
@albertoaparecidosilvasilva2767 3 месяца назад
Tem muitas máquinas no mercado mais eficiente e com preços acessíveis
@shawnwoods9280
@shawnwoods9280 3 месяца назад
How much will it lift?
@highnoter1
@highnoter1 3 месяца назад
Or you go to hobo freight and by an electric one for $50.
@TsimnujXyooj
@TsimnujXyooj 2 месяца назад
Good idea sir/
@DiamleonDiyBuilds
@DiamleonDiyBuilds 2 месяца назад
Thank you very much dear
@ArifulIslam-pz1ei
@ArifulIslam-pz1ei Месяц назад
Very nice
@DiamleonDiyBuilds
@DiamleonDiyBuilds Месяц назад
Thank you very much dear
Далее
Building  an ELECTRIC HOIST ||DIY|| Sek Austria
14:09
Просмотров 1,3 млн
#kikakim
00:18
Просмотров 1,9 млн
Wiper Motor + Chain + Sprocket = Powerful Thing
9:11
Sugarcane Juice Machine Restoration | ak Restoration
22:35
Homemade Gas Powered Plow 200cc
14:35
Просмотров 3,3 млн
Homemade Electric Workshop Crane
18:59
Просмотров 4,3 млн
Homemade Amazing Agricultural Vehicle
22:26
Просмотров 24 млн
DIY-Simple Fence Wire Netting Machine
14:41
Просмотров 4,1 млн
Щелочкин снова в деле
0:45
Просмотров 3,3 млн
#saiho @EkaterinaKorea @Prettyman
1:00
Просмотров 1,2 млн
#saiho @EkaterinaKorea @Prettyman
1:00
Просмотров 1,2 млн